Tristar TS-MPPT-60 12/24/48V 60A Charge Controller
Morningstar?s TriStar MPPT solar controller with TrakStar Technology? is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry?s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.
Key Features and Benefits
Maximizes Energy Harvest
Our TrakStar MPPT Technology features:
Better peak power point tracking than other MPPT controllers
Very fast sweeping of the entire I-V curve
Recognition of multiple power points during shading or mixed PV arrays
Excellent performance at sunrise and low solar insolation levels
Extremely High Reliability
Robust thermal design and no cooling fans controllers
Parallel circuit design provides less stress and longer life for electronic components
No mechanical relays
Extensive electronic protections including PV short circuit protection
Epoxy encapsulated inductors and conformally coated printed circuit boards
Very High Efficiency
Peak efficiency of 99%
Proprietary tracking algorithm minimizes power losses
Low self-consumption
Continuous operation at full power to 45?C without need to de-rate
Selected electronic devices with higher ratings to minimize losses from heating
Extensive Networking and Communications Capabilities
Enables system monitoring, data logging and adjustability. Uses open standard MODBUS? protocol and Morningstar?s MS View software.
Meterbus: communications between compatible Morningstar products
Serial RS-232: connection to a personal computer
EIA-485: communications between multiple devices on a bus
Ethernet: fully web-enabled interface to a local network or internet; view from a web browser or send email/text messages
Metering and Data Logging
Optional TriStar meter and remote meter provides detailed operating data, alarms and faults
Three LED?s display system status
Up to 200 days of data logging via meters or communications ports
Electrical |
Model | TS-MPPT-30 | TS-MPPT-45 | TS-MPPT-60 |
Maximum Battery Current | 30 amps | 45 amps | 60 amps |
Nominal Maximum Operating Power* | 400W (12V) | 600W (12V) | 800W (12V) |
800W (24V) | 1200W (24V) | 1600W (24V) |
1200W (36V) | 1800W (36V) | 2400W (36V) |
1600W (48V) | 2400W (48V) | 3200W (48V) |
Peak Efficiency | 99% |
Nominal System Voltage | 12, 24, 36 0r 48 volts DC |
Maximum PV Open Circuit Voltage** | 150 volts DC |
Battery Operating Voltage Range | 8-72 volts DC |
Maximum Self-consumption | 2.7 Watts |
Transient Surge Protection | 4500 Watts/port |
Electronic Protections |
Solar | Overload, Short Circuit, High Voltage |
Battery | High Voltage |
High Temperature |
Lightning and Transient Surges |
Reverse Current at Night |
Battery Charging |
Charging algorithm | 4-stage |
Charging stages | Bulk, Absorption, Float, Equalize |
Temperature Compensation Coefficient Range Set Points | |
?5mV/?C/cell (25? ref) |
?30?C to +80?C |
Absorption, Float, Equalize, HVD |
**Note: Remote Temperature Sensor is included.** |
Battery Charging |
Dimensions | 29.1 x 13.0 x 14.2 cm 11.4 x 5.1 x 5.6 in |
Weight | 4.2 kg / 9.2 lbs |
Max. Wire Size | 35 mm? / 2 AWG |
Conduit knockouts | M20; ?, 1, 1 ? in |
Enclosure | Type 1 (indoor and vented) IP20 |
Environmental |
Ambient Temperature | ?40?C to +45?C |
Storage Temperature ? | ?55?C to +100?C |
Humidity | 100% non-condensing |
Tropicalization | Epoxy encapsulation Conformal coating Marine rated terminals |
Communication Ports |
MeterBus | Yes | Yes | Yes |
RS-232 | Yes | Yes | Yes |
EIA-485 | No | No | Yes |
Ethernet | No | No | Yes |
Maximum Battery Current | 30 amps | 45 amps | 60 amps |
Options
- TriStar Meter-2 (TS-M-2)
- TriStar Remote Meter-2 (TS-RM-2)
- Dual-core(ARM CPU+DSP) control architecture improves the system response speed and optimizes the performance of the system
- Meter Hub (HUB-1)
- Relay Driver (RD-1)
*Input power can exceed Nominal Maximum Operating Power, but controller will limit and provide its rated continuous maximum output current into batteries. This will not harm the controller (reminder: do not exceed Voc).
**Exceeding Maximum PV Open Circuit Voltage may damage the controller.