Buy TT520 Flash Speedlight in Nigeria

TT520 Flash Speedlight

₦ 100973.79 ₦ 106,288.20 -5%

0 No Reviews

Product SKU: RENG43586

Quantity

In Stock

100% Secure Payments

TrustPay

Pay Online Delivered T&C^*

Check your shipping location

Have one to sell? Sell on rehmie

Product Specifications
Description

Vertical Rotation Angle: 0~90 degrees, Horizontal Rotation Angle: 0~270 degreesCompatible with Canon, Nikon, Sony, Panasonic, Olympus, Fujifilm, Pentax, Sigma, Minolta, Leica and Other SLR Digital SLR Film SLR Cameras and Digital Cameras with single-contact Hot ShoePower Management: Switch to the ON, the flash will start charging. After several seconds, the charging indicator turns red and TT560 is then ready to shoot.For a test flash, press the test button. After use, press the ON/OFF to OFF to power off. If the red charging indicator lamp flickers, it indicates low battery. In such case, the power will turn off automatically and you need to replace the batteries. The flash unit has 8 steps of power output control which is indicated by 8 pieces of LED lamp for different level. Press "+" and "-" to raise and lower power: 1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1
Specifications:
Guide Number:38 ( ISO 100 )Flash Mode: M, S1, S2Vertical Rotation Angle :0~90 degreesHorizontal Rotation Angle: 0~270 degreesPower: 4xAAsize batteries ( Alkaline or Ni-MH are usable )Light Quantity Output Control :with 1/8 - stop incrementColor Temperature: 5600KFlash Duration :1/300s~1/20000sDimensions :190*75*55mmNet Weight :286g
Modes
In M Mode, you can set TT560 onto your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal.
S1 Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger.
S2 Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash.

Safety Features and Information
For protection in continuous flashes, to prevent the flash head from getting too hot and damage, please do not flash over 20 times when in power lever 1/2,1/1. Please cool down the flash unit for at least 10 minutes. The over-temperature protection function will be activated if you continue to flash after 20 times. In this state the charging time will turn to 10-25s. Please cool down the flash unit around 10 minutes and it will turn to normal state.
When the inner circuit is over-heating, which indicates over use of the flash unit, the inner circuit will shut down power automatically. The flash unit will turn to normal state after the inner circuit is cooled down.