Hi-hat clutch for Hi hat cymbal drum percussion instrument parts.
Fit for 1/4'' (6mm) pull rod.
It's a piece of replacement for Hi hat cymbal.
Quickly changes hi hat cymbals to open or closed position.
Material: Metal
Drummer’s hardware can be confusing and challenging at first, but it’s also hard to find people to teach you how to use it. Hi hat clutches are a great example of this - they’re an essential piece of every single drum set, but putting them together, using them, and picking which one to use is a challenge in and of itself.
Hi- hat clip allow you to attach your top hi hat cymbal to your hi hat stand, letting you open and close your hats with your pedal. Basically, they are central to making your stand actually work!
Here's how to put them together:
- Unscrew the bottom half of theclip, and remove the bottom screw and felt.
- Attach the top part of the clip and top felt to the top hi hat cymbal.
- Turn the cymbal over, and underneath the cymbal, put the felt back onto the clutch.
- Take the removed bottom screw, and screw it back onto the clip Use the top screws to adjust the tightness of your top cymbal.
- Finally, put the hi hat clutch and cymbal onto the rod of the hi hat stand, and tighten the wingnut at your desired placement. You can use the pedal of your stand to help get the placement just right.
When all is said and done, you should have the two felts sandwiching your cymbal in between them, with two screws above the felts for tightness adjustment, and one screw on the bottom holding everything together.