Ensure you charge this UPS for Minimum of 6 hrs before using it.
Always on point with Mercury line of products. It has stand the test of times to me one of the leading makers of Line interactive backup ups for all applications. It has no dulling effect whatsoever.
No need to get your desktop computer hard drive crashing or loosing your work when on the PC. No need having to loose your favorite TV program due to power failure and having to wait for minutes getting it back up again. This unit will sustain power until you put on your generator for continuity of use again.
Mercury Elite 2000VA Pro UPS features a Boost and buck AVR, three LED indicators for easy understanding and is fully digitized microprocessor controlled. Efficient and durable, Ideal for PC, TV, Sound system etc
Backup now to protect your valuables from surge, brown outs and over voltages that might arise from your generator or public utility power. It is guaranteed that with the use of UPS for your gadgets, you have over a lifetime of us of your power devices. No more frequent purchases of that your laptop power adapter or Phone chargers.
This UPS can be sure to protect your system from damage, especially an unpleasant crash when the power supply suddenly fails. Being able to achieve this protection with a relatively inexpensive uninterruptible power supply unit is certainly a benefit you should take advantage of. What's more, you prevent loss of vital data and other digital resources that can result from sudden power outage, when there is no UPS backup.
Specification
Rating input voltage | 2000 VA / 1200 W |
Rating input frequency | 60/50Hz (auto sensing) |
Input phase | Single phase |
Input socket | With Fuse |
Cold Start (0 to 100% load) | Press the ON/OFF Switch |
Input Range (220V) | 140-300 |
Rating output(VA) | 2000 |
Rating output (W) | 1200 |
Power factor | 0.6 |
Rating output voltage (V) | 220 |
Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
AC Voltage Regulation | ±10% (Battery mode) |
Rear output socket | 4 x Universal – Battery backup |
Waveform | Simulated Sine Wave (Battery mode) |
Line Mode | Synchronize with the utility |
Rating frequency | 60Hz or 50 Hz ± 1 Hz |
Battery Mode | Yellow flashing |
Short circuit protection Line Mode | Fuse & Firmware protection |
Short circuit protection Battery Mode | Firmware Protection |
Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
Indicators AC mode | Green Lighting |
Indicators Battery Mode | Yellow Flashing |
Indicators Fault | Red Lighting |
Alarm Battery Mode | Sounding every 10 Seconds |
Alarm Low Battery | Sounding every Second |
Alarm Overload | Sounding every 0.5 second |
Alarm Fault | Continuously sounding |
Full Protection | Overload, discharge, and Overcharge protection |
Transfer Time | Typical 2-6ms, 10ms max. |
Transfer Time | Typical 2-6ms, 10ms max. |
Communication Interface | Optional RS232/RJ11 |
Battery and runtime Rating | 2 X 12V/9AH |
Recharge time – Typical | 6-8 hours recover to 90% capacity |
Charge current | About 1A at normal mode. |