Paste strong self-adhesive aluminum foil checkered leak-proof tape butyl tape waterproof leak-proof tape water pipe leaks catch leaks daylighting cover roof iron wall cracks 50mm x 5m leak-proof rubber.
It can maintain flexibility and adhesion , can withstand a certain degree of displacement, and has good follow-up to deformation.
2) Waterproof, sealing and chemical resistance, strong anti-ultraviolet (sunlight) ability; long service life.
3) Easy to use, accurate dosage, reduce waste, and cost-effective.
4) Does not contain any solvents, safe and environmentally friendly.
2. Main purpose
1) The overlap between the corrugated iron sheet steel plate and the daylighting cover , and the connection between the pipes of the falling patio
2) Doors, windows, concrete roofs, and ventilation ducts are sealed and waterproof.
3) Installation of PC board and endurance board.
4) Adhesive, sealed and anti-vibration of waterproof film for automobile doors and windows.
Application method
1) According to the gap between the joints and the requirements of the engineering design, choose a waterproof tape of appropriate specifications.
2) Before pasting, the water, oil, dirt and other impurities on the surface must be completely removed to keep the pasting surface clean.
3) Starting from one end of the head, open the double-sided tape and stick the tape to the overlap of the lower board in a straight line along the seam , and then press the tape from light to heavy by hand to make it firmly with the veneer.
4) Tear off the isolation paper on the upper layer of the tape, press the upper corrugated board of the interface into the joint, and then squeeze the joints in order to make the joints adhere firmly and tightly sealed.
