This UPS is a sophisticated piece of equipment with central processing system. It is equipped with advanced voltage compensation technology, advanced frequency technology and advanced PFC technology all to produce an undistorted standard sine wave from a wide range of input variables. Its zero transfer ability is suited for application that requires seamless input parameters.
USES:
To back up and safeguard from power surge Small-Medium network, critical servers and other IT equipment, workstations
Features
- High frequency and double conversion online technology
- Fully digitized microprocessor control
- Wide input voltage range
- LCD display
- UPS start up without battery (for 1-3KVA)
- Cold start
- Advanced battery management
- Lightning and surge protection
- Fan speed auto control when loads varies
- Network/fax/modem surge protection (for 1-3KVA)
- Optional extension battery pack
- Battery voltage display
- Load capacity display
- EMI/RFI noise filter
- Smart RS232 communication with monitoring software
- Optional SNMP card slot
- EPO function (optional)
- Input L and N reversed alarm function (1-3KVA)
-
NOTE: This one is used for servers, workstations, some hospital equipment, etc. Check our other ads for the super duty model used for elevators etc.
• PLEASE DONT OVERLOAD to avoid voiding the warranty. Max power is 5.7kw or 5880W
• Use Qualified Technician to install it.
• Charge for a minimum of 8hrs before first time use
• For it to last longer, don't drain the battery to 0%. Switch off when battery is at 20% until next charge.
• If you use it well, it will last years.
• If your power source in your area fluctuates, connect this ups to a 10kva Stabilizer.
• Store in a cool, dry place.
INPUT
- Voltage range: 176+-5VAC - 276+-5VAC
- Power factor____ 0.98 (Power is 5880 W)
OUTPUT:
- Voltage range.......20Vac+-1%
- Wave form... SINE WAVE
- Transfer time....... 0ms (between AC mode and battery mode), meaning seemless transfer which safeguards sensitive equipment.
- Back up time (half load)....... 20 minutes
- Back up time (full loqad)..........7 minutes
- Recharge time:................ 90% capacity after 8hrs charge
- Storage temperature -0 degrees celsius -40 degrees celcius to 50 degrees celsius
- Noise level....... <55dB
Please charge for at least 8hrs before first time use. As soon as you buy, call me to send you the accurate wiring requirements to connect this equipment (eg correct ampereage of circuit breaker, wires etc) so that it will serve you well.
