|Size (L x W x H cm)
||15 x 10 x 10
|Area of use
|What's in the box
||1X LED Headlamp Zoomable 10000Lm T6 Head Flashlight Torch Rechargeable Head Fishing Headlight 18650 Battery Car USB AC Charge
Feature: 1. High quality chips, under the same bright spotlight. 2.4 mode switching, get different brightness, the headlight can be adjusted by about 90 degrees. 3. Long-lasting aluminum alloy casing, wear-resistant. 4. The charging interface on the battery holder is more convenient for charging. 5. Adjustable elastic headband for easy to put on or take off. 6. The red indicator light on the battery holder plays a good warning role to walk or ride a bicycle at night! 7. Suitable for outdoor sports enthusiasts to do some outdoor activities, such as hunting, cycling, hiking, camping and so on. Lamp type: XML T6 2XPE Lumens: 10000 lm Material: aluminum alloy Sliver style battery power: 2x Rechargeable Lithium-ion 3.7V 18650 Battery(4800mah) Gold style battery power: 2x Rechargeable Lithium-ion 4.2V 18650 Battery Charger input: 100-240V AC Beam Angle: 90 Switch type: single button Light mode: 4 types, single light, double light, big light, flashing Instructions for use 1. Check the battery: Make sure the battery is charged and installed in the correct direction as the flashlight; 2. When the flashlight is in use, it should be selected according to the voltage and battery requirements of the flashlight. It should not be used indiscriminately to prevent the circuit board from being burnt out. Different types of batteries with different voltages should not be used at the same time; 3. In use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent the battery from being over-discharged and timely charged; pay attention to the battery's waterproof, moisture-proof, anti-drop, etc., according to the charging speed of the charger when charging, After the indicator light changes, remove it in time, do not overshoot; 4. For batteries that are not used for a long time, the battery should be fully charged and maintained, and then charged and discharged once every three months to avoid chemical corrosion; 5. The inner wall of the lamp cup is kept clean. Never wipe it with your hand or a hard object. Clear the fingerprint on the lens and wipe it gently with a cotton swab and lens cleaner. 6. Do not touch the flashlight with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the flashlight; 7. Non-professionals should not disassemble the flashlight to prevent damage to the circuit board.