Knapsack sprayer widely used in agriculture and fumigation, used chiefly in pest control and in spraying fungicides or insecticides. It is a continuous type of sprayer with a fairly constant discharge rate. The knapsack sprayer can be used for spraying breeding sites with larvicides. it consists of a knapsack tank together with pressurizing device, line, and sprayer nozzle.
Capacity: 16 Ltr, Pressure: 0.2-0.4 Mpa, Lance: Fiber, Light Weight Sprayer, Strong Blow Moulded Tank.
Strong Blow Molded Tank, Plastic / Brass Pressure Chamber, Adjustable Nylon Belt
Compatible with common fertilizers, weed killers and pesticides, The large filler opening at the top and the filter makes for easy use and cleaning
Ideal to spray insecticides, pesticides, fungicides, herbicides. in field areas to protect the crop from pest attack.
HOW TO USE :
Assemble your sprayer (if new) following the manufactures instructions.
Ensure you are fully prepared with the appropriate PPE (Personal Protective Equipment) including rubber boots, coveralls, gloves and a face shield.
Ensure the sprayer is calibrated to the required dosage
Fill the spray tank with the required amount of water, we recommend always reading and following the manufacturers label and instructions before use and using the rate suggested.
Measure the chemical needed in a mixing jug in a safe environment. If the chemical container is new and is sealed with a foil, simply turn the cap upside down, press onto the foil seal and twist to remove.
Add chemical into the sprayer with the water. We recommend not mixing more than what is needed.
Triple rinse the measuring jug.
Agitate the sprayer to make sure the liquid is fully mixed.
Now you are ready to spray. Put the sprayer on your back and adjust until comfy.