Portable Mini Multimeter Digital Clamp Meter With Bundle
Portable multimeter digital clamp meter small clamp flow meter MT87 buzzer anti-burn zero fire wire data retentionMT-87 Digital Clamp Meter Electronic Tester Pocket Clamping Meter for Measuring AC/DC Voltage, AC Current, Resistance, Data Hold & Overload Protection in Portable Mini MT87 Electric Testing Specification: AC Current: Range 10mA ~ 20A, 100mA ~ 200A, 1A ~ 400A. Overload protection: 400A on all ranges. AC Voltage: Range 1V ~ 450V. Overload protection: 450V AC on all ranges. DC Voltage: Range 1V ~ 600V. Overload protection: 600V DC / (peak AC) on all ranges. Diode Test, Continuty test, Resistance measurements,Transistor P-N junction test. Continuity test with buzzer sound while & lt; 75 Ohm. Resistance Measurement: 200K Ohm Range. Max display: 1999, Auto polarity display. Data hold function. Power : 2 x AAA 1.5V battery (Included for you) Cable length : about 80 cm. Weight : 203g. Dimension: 150 x 65 x 28 mm. Note : If a battery signal appears on the display, it indicates battery should be replaced. Package Includes : 1 x MT87 Digital Clamp Multi-meter. 2 x AAA Batteries. 1 x Testing Leads Pair
220v 80w Automatic Feed Soldering Gun
1. Soldering iron 220V.
2. High efficiency, fast start.
3. Soldering temperature very stably.
4. CE, CTA, RoHS approved.
5. Good material ensure product safety and long life.
Brand Name
SUOER brand
Model Name
MKA-806
Power
20W 80W
Voltage
220-240V
Packing
Box
Characteristic
Very stable and work fast
1. Keep the tip head is always hanging tin.2. Soldering not strong acidic flux.3. Can not with a file or a hammer to repair file and beat the tip head.4. In the non-wetting occurs, the application of fine sand leather polish tip, and then the flux infiltration on tin; on the tin when the tip temperature is controlled at about 250 & deg;C best.5. Soldering iron power use is strictly prohibited disassemble parts of its electric part.6. The use of the electric iron, should be equipped with natural radiation structure of the iron seat and placed in the Iron Block.7. If the power cord is damaged, to avoid danger, to be replaced by the manufacturer, or the maintenance department or similarly qualified persons.8. This product is subject to ground the device, please pick for the safety.
Multi-function Screwdriver LCD Display Testing Meter AC DC 12-250V Digital Tester Detector Pen
100% brand new and high qualityAC/DC Voltage Detector Tester.No need battery to drive. Economical and practical.Fast induction test. Durable and long service life.Contact AC/DC Voltage test: 12V to 250VColor : Black Length: Approx. 5.12inch / 13cmVoltage test Display: if the tested voltage doesn't reach 70% of higher voltage, it will display lower voltage.Breakpoint test: Keep the tip of tester 1-5 cm from the tested electric line, if an induction marking is found on the L
Soldering iron
The soldering iron is of high quality and solder gets you tinkering right away....wether you are working on a school project, tinkering or building the next great gadget.Made of chromium heating element which can heat rapidly
60W Soldering IronPiolt light indicatorFree solder includedThe pros kit Desoldering pump comes with high vacuum force especially made for clearing circuit board in rework jobs and field repairs,
ADA Tweezer
This tweezer allows you to pick-up and solder SMD components as well as carry out other delicate and sensitive tasks.
Features :
This is an anti-static and anti-acid tweezerMade of high quality stainless steel for durability and functionalityEasy to carry and useSimple and practical designIdeal for magnetism sensitive componentSpecifications :
Stainless steel tips with plastic insulationColor: BlackProduct weight: 16 g0.8mm 60/40 Tin Lead Roll Soldering Solder Wire Spool
..60/40 rosin core solder, FLUX 1.8-2.2%, Wire diameter 0.8mm.Good solderability, insulation resistance, No spattering and Non-corrosive.Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others
The Digital Clamp Multimeter is an ideal tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include overload protection. Specification: DC Voltage: 200mV/2V/20V/200V/600V; & plusmn;(0.5%+2) AC Voltage: 200V/600V; & plusmn;(1.2%+10) DC Current: 20?A/200?A/2mA/20mA/200mA/10A; & plusmn;(1%+2) Resistance: 200?/2k?/20K?/200K?/2M? & plusmn;(1%+10) Display Count: 1999 Manual Range Data Hold LCD Backlight Size: 105*60*27mm(4.1 x 2.4 x 1 inch) Please note: Please read relevant information carefully and observe all the warnings and note strictly. Sometimes, the readings will change at a range due to the influence of the exposure to electromagnetic fields, then just get any one within those readings. The meter can be cleaned with soft clean cloth to remove any oil, grease or grim. Do not use liquid solvent or detergent. Work temperature:0~40 & ordm;C.the humidity Package: 1 x JT-830LN Digital Multimeter 2 x Test Leads (pair) 1 x 9V Battery 1 x User's Manual
HIGH CALIBER, VERSATILE DIGITAL MULTIMETER: Superior multimeter, ideal for electricians, hobbyists and professionals, extended use for automotive, household and industrial electrical troubleshooting.
With function of data hold, and a backlit LCD with large digits for visibility in dimly lit areas,Meter stores reading data for future reference.
As a general measurement tool and widelyused in the school, laboratory, factory and other social field.
Protective rubber sleeve for drop protection; Built-in support stand for hand free use.
packed included 1pc
Note:color of the carton may differ from color of the item itself!!!
Portable multimeter digital clamp meter small clamp flow meter MT87 buzzer anti-burn zero fire wire data retention
MT-87 Digital Clamp Meter Electronic Tester Pocket Clamping Meter for Measuring AC/DC Voltage, AC Current, Resistance, Data Hold & Overload Protection in Portable Mini MT87 Electric Testing Specification: AC Current: Range 10mA ~ 20A, 100mA ~ 200A, 1A ~ 400A. Overload protection: 400A on all ranges. AC Voltage: Range 1V ~ 450V. Overload protection: 450V AC on all ranges. DC Voltage: Range 1V ~ 600V. Overload protection: 600V DC / (peak AC) on all ranges. Diode Test, Continuty test, Resistance measurements,Transistor P-N junction test. Continuity test with buzzer sound while & lt; 75 Ohm. Resistance Measurement: 200K Ohm Range. Max display: 1999, Auto polarity display. Data hold function. Power : 2 x AAA 1.5V battery (Included for you) Cable length : about 80 cm. Weight : 203g. Dimension: 150 x 65 x 28 mm. Note : If a battery signal appears on the display, it indicates battery should be replaced. Package Includes : 1 x MT87 Digital Clamp Multi-meter. 2 x AAA Batteries. 1 x Testing Leads Pair
Description
Integrated Non-Contact Voltage Detector
The MA1500 is a 1500A True RMS AC/DC Clamp Meter. 2.0 in. (52mm) jaw size for conductors up to 500MCM with True RMS for accurate readings of non-sinusoidal waveforms. Additional features include: Relative Mode for Capacitance Zero and Offset Adjustment, Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and Inrush function to capture transients during motor startup. Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying case.
ntegrated Non-Contact Voltage Detector The MA1500 is a 1500A True RMS AC/DC Clamp Meter. 2.0 in. (52mm) jaw size for conductors up to 500MCM with True RMS for accurate readings of non-sinusoidal waveforms. Additional features include: Relative Mode for Capacitance Zero and Offset Adjustment, Data Hold, Peak Hold, MIN/MAX, Auto Power Off, and Inrush function to capture transients during motor startup. Complete with test leads, Type K bead wire temperature probe, 9V battery and carrying cas
Ships within 24 hours
True RMS For Accurate Readings Of Non-Sinusoidal Waveforms
Built-In Non-Contact Voltage Detector With LED Alert
Dual 40,000/4000 Count, Backlit LCD Display
Includes Multimeter And Type K Temperature Functions
Inrush Function Captures Transients During Motor Startups
Digital Multi-Meter
Large LCD display with high accuracy
Measure AC/ DC voltage, AC/ DC current, resistance, capacitance and diode
Stable performance, high reliability
Max LCD display: 1999
Operating condition: 0 to 40
Power Supply: 9V battery (Installed)
Measuring Capacitance Range: 0.01nF~200uF
Measuring Voltage Range: DC: 0.1mV-1000V, AC: 0.1mV-750V
Measuring Current Range: DC: 0.001mA-20A, AC: 0.001mA-20A
Measuring Resistance Range: 0.1R-200MR
Model Number: DT9205A
Dimension: 186 x 86 x 33mm
Comes with one black test lead and one red test lead
Auto power off
Auto zero function
Single 32 position switch for function range
Description
UNI-T-UT521-Digital-Earth-Tester-Earth-Ground-Insulation-Resistance Meter.UT520 series earth resistance tester has the functions of backlight display, low battery display, data hold, data storage, auto power off and power saving. It can not only be used for accurate three-wire measurement but also simple two-wire measurement.
It is applicable to measuring the earth resistance of all kinds of electrical power system, electrical equipment and anti-thunder equipment. It can also measure the earth voltage. It is applicable to testing operating earth systems of smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and construction.
Digital Earth Tester Meter UT521, it is professional tester and with multi-function. What's more, it is easy to operate. A brand-new, unused, unopened, undamaged item in its original packaging.
- Model: UT521- Color: Deep Grey + Red- ABS case material- 2.8" LCD display- Earth Resistance testing range: 0~20 ohm +/- (2%+20), 0~200 ohm / 0~2000 ohm & plusmn;(2%+3)- Earth voltage: 0~200V AC (50/60Hz) & plusmn;(1%+4)- Data Logging: 20 groups- Auto power-off after 10 min- Over range Indication: "OL"- Double insulation protection- Uses 6 x AA batteries (included)- Accessories:- 2 x Simple test wires (green/red)- 3 x Standard precision test wires with clip (yellow/green/red)- 2 x Auxiliary earth stakes- 1 x Carrying bag- 1 x English manual
Dimensions: 6.22 in x 3.90 in x 2.76 in (15.8 cm x 9.9 cm x 7.0 cm)Weight: 14.46 oz (410 g)
The Sunwei YX-360TRn is an analog multimeter, you can use it to measure AC/DC voltage, DC current, resistance, diode check and transistor leak current, for DC current, it can measure as low as 10 micro amps and up to 250 mA, which is hard to do with a digital multimeter. Specifications: *DCV: 0 - 0.1V & plusmn;1% 0.25V/2.5/10V/50V/250/1000 & plusmn;3% *ACV: 0 -10/50/250/1000V & plusmn;4% *DCA: 0 - 50 & micro;A/2.5mA/25mA/250mA & plusmn;3% *Resistance: 0 - 2K/20K/2MKohm & plusmn;3% 200M & plusmn;5% *dB: -10 dB - 22 dB *Diode check (including LED) *Transistor leak current Features: * All range fused * Compact size * 0 ohm adjustment Accessories: * Test leads (attached) * AA battery X 2 (installed) * User Manual
Engineering 2 Channel Handheld Humidity K Type Thermocouple Datalogger
The HH311 is a low cost, high performance handheld meter. It offers a triple display to show the temperature and humidity from a handheld probe and can display data from a separate K type thermocouple connected via a standard SMP type miniature connector to the T2 input. The temperature/humidity probe uses a semiconductor and polymer capacitive sensor. An optional software package is offered to allow data to be read by a PC through the RS232 port. SPECIFICATIONS Range: 0 to 100% RH, -20 to 60 & deg;C (-4 to 140 & deg;F) T2 Range: -200 to 1370 & deg;C (-328 to 2498 & deg;F) Resolution: 0.1 (except T2 for -200 & gt; T2 & gt; 200) Accuracy: & plusmn;2.5% RH at 25 & deg;C, & plusmn;0.7 & deg;C ( & plusmn;1.4 & deg;F) T2 Accuracy: & plusmn;[0.5% rdg & plusmn;1 & deg;C (2 & deg;F)] Humidity Response Time: 75 sec in slowly moving air T1 Response Time: 40 sec in slowly moving air Meter Dimensions: 186 H x 64 W x 30 mm D (7.3 x 2.5 x 1.2') Probe Dimensions: 190 x 15 mm (7.5 x 0.6'), cable stretches to 1.5 m (5') Operating Environment: 0 to 50 & deg;C (32 to 122 & deg;F), 0 to 90% non-condensing Storage Environment: -10 to 60 & deg;C (14 to 140 & deg;F), 0 to 80% non-condensing Power Requirements: One 9V battery (included), AC adapter 9 Vdc 10 mA min Plug Diameter: 3.5 x 1.35 mm RS232: 9600 bps, N, 8, 1 serial interface Battery Life: Approx 100 hours with alkaline battery Weight: Approx 320 g (11.3 oz)
Triple Display
Temperature/Humidity Probe
Second Temperature Input
RS232 Interface
Timer and REL Functions
MIN MAX HOLD Functions
Resolution 0.1
NIST Certificate
Auto Power Off
Digital Storage Oscilloscope Uni-t Utd2052cl Dual - Channel
Warranty Period
1 Year
UNI-T UTD2052CL Dual-Channel Digital Storage Oscilloscope (50MHz) Details
Featuring a large, 7-inch screen with full colour display, the UNI-T UTD2052CL is a great tool for accurately tracking signal inputs over a time period.
This oscilloscope is dual-channel, which means users can input two signals at the same time and these signals will be represented on the screen as two separate readings. It features in-built storage for tracking signals over a time period, and it is also possible to transmit signal data to PC via the use of a USB connection and software CD (both included in the package).
The UTD2052CL uses bandwidth of 50Mhz, sampling rate of 500mS/s and rise time of & le;7ns. It also includes multiple trigger modes (edge, pulse, video and alternate) and comes with an array of adjustment buttons and advanced functions for ensuring you get the measurements you need at all times.
This product also features memory depth of 25kpts, waveform acquisition rate of & ge;2000wfms/s and vertical sensitivity of 1mV/div-20V/div.
EN6101-1 and CAT II 300V safety rated.
UNI-T UTD2052CL Dual-Channel Digital Storage Oscilloscope Key Features
Dual channel measurements with waveform representationBandwidth of 50MhzSample rate of 500ms/sRise time of & le;7nsMemory depth of 25kptsWaveform acquisition rate & ge;2000wfms/sVertical sensitivity of 1mV/div - 20V/divTime-based range of 5ns/div - 50s/divStorage modes: Setup, Wave, BitmapTrigger Modes: Edge, Pulse, AlternateUSB OTG7" 64K Colour TFT LCD screenFull List of Products Included
UNI-T UTD2052CL Dual-Channel Digital Storage OscilloscopeProbe x 2 (1 x, 10 x Switchable)Power CordUSB CablePC Software CDTechnical SpecsProduct DownloadsUNI-T Digital Oscilloscope Brochure (Size: 3.8 MB)UNI-T UTD2000 & UTD3000 Series Oscilloscopes - User Manual (Size: 2 MB)UNI-T UTD2052CL Technical Specifications
Channels 2Bandwidth 50MhzSample Rate 500ms/sRise Time & le;7nsMemory Depth 25kptsWaveform Acquisition Rate & ge;2000wfms/sVertical Sensitivity 1mv/div-20V/divTime-Based Range 5ns/div-50s/divStorage Setup, Wave, BitmapTrigger Modes Edge, Pulse, AlternateInterfaces USB OTGDisplay 7" 64K Colour TFT LCD (400 x 240)Power 100-240V AC, 40-440Hz
Test Kit With Digital Multimeter - Noncontact Voltage & Electrical Outlet Tester
BrandKlein ToolsPower SourceBattery PoweredStyleMultimeter KitColorGreen,RedItem Weight0.94 PoundsAbout this itemMOST POPULAR TESTERS in this convenient kit feature three products for a variety of electrical test and measurement applications; Manual-Ranging Digital Multi-Meter, Non-Contact Voltage Tester, Receptacle TesterMULTIMETER FEATURES of the MM300 include measurement up to 600V AC/DC voltage, 10A DC current and 2MOhms resistanceVOLTAGE TESTER APPLICATIONS include 50 to 1000V AC power detection range for non-contact detection in cables, cords, circuit breakers, lighting fixtures, switches, non-tamper-resistant outlets, and wiresCLEAR INDICATION OF VOLTAGE with a bright green LED to indicate the tester is working; it changes to bright red LED and audible tones sound when voltage is detectedDETECT WIRING CONDITIONS on Receptacle Tester identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defectsTRUSTED SAFE with a safety rating of CAT III 600V for the MM300 and a safety rating of CAT IV 1000V for NCVT1PCONVENIENT KIT includes all required batteries to operate the Digital Multimeter and Voltage Tester plus a set of right-angle leads
Autoranging clamp multimeter can be used to measure AC and DC Voltage, AC Current, Resistance, Diode test, Data Hold, Max Value Hold. troubleshoot electrical problems safely.
The clamp multimeter will not be easily destroyed by overload test for overload protection, and the meter will auto power off after 10 mins & rsquo;s no operation to save energy
If you have basic knowledge about multimeters you can try this small multimeter for basic continuity checks and voltage measurements and also can be used for heavy ampere measurement in heavy load wires.
Salient features: AC 1000 Amp. Clamp Meter AC 750 Volt & DC 1000 Volt Resistance & Continuity Buzzer 2000 Count Display & Jaw Size 50 mm Data Hold & Manual Range Selection 1 X 9V. Battery
lcd digital clamp ampere ac dc voltage multi meter current ohm tester this meter can measure ac/dc voltages, ac currents and resistance.
