63/37 0.8mm Tin Lead Rosin Core Flux Soldering Welding Iron Wire Reel
The 63/37 0.8mm Tin Lead Rosin Core Solder Flux has good solderability, insulation resistance, No spattering and Non-corrosive.Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others.
DC MMA INVERTER WELDING MACHINE
BRAND NAME: WORXFLEX
MODEL: MMA- 255A
Has all the adjustable parameters needed for the MMA welding Process and therefore suitable for a variety of workpieces
Pulse welding
All Welding parameters are easily identified with matcching graphics making operation easy and straightforward
Full digital design and ighly integrated circuit greatly reduce interruption and failure rate.
Input: 220 Volts
IGBT Technology
Sitable for MMA welding
Light weight and portanle
Power rating: 6.8kVA
Note: Must use generator 7KW and above to avoid damage.
DC MMA INVERTER WELDING MACHINE
BRAND NAME: MAXMECH
MODEL: MMA- 250
Has all the adjustable parameters needed for the MMA welding Process and therefore suitable for a variety of workpieces
Pulse welding
All Welding parameters are easily identified with matcching graphics making operation easy and straightforward
Full digital design and ighly integrated circuit greatly reduce interruption and failure rate.
Input: 220 Volts
IGBT Technology
Sitable for MMA welding
Light weight and portanle
Power rating: 6.8kVA
Note: Must use generator 7KW and above to avoid damage
MMA INVERTER WELDING MACHINE
BRAND NAME: total
MODEL: MMA - 200A
Has all the adjustable parameters needed for the MMA welding Process and therefore suitable for a variety of workpieces
Pulse welding
All Welding parameters are easily identified with matcching graphics making operation easy and straightforward
Full digital design and ighly integrated circuit greatly reduce interruption and failure rate.
Input: 220 Volts
IGBT Technology
Sitable for MMA welding
Light weight and portanle
Power rating: 6.8kVA
Note: Must use generator 7KW and above to avoid damage.
easy arc welding electrode Application: e6013 easy weld electrodesUsed to weld low carbon structure & low alloy steel structure, such as 16 Mn etc. Before welding, it is necessary to clean the workpiece & remove the impurities such as oil ,grease rust and moisture, and bake the electrode at a temperature of about 350-degree centigrade for one hour. Welding must be carried out under a short arc & is suitable for narrow paths. When used DC,it must be connected with positive polarities arc welding electrode High quality: 6013 easy weld electrodes1.arc stability 6013 easy weld electrodes2.small spark 6013 easy weld electrodes3.slag well-distributed cover 6013 easy weld electrodes4.weld line molding well 6013 easy weld electrodes5.also have good strength welding rods AWS E6013 J421The welding electrodes are of high welding ability. It is suitable for the welding of vessels and many other places. 6013 easy weld electrodes welding electrode detail package is following: 6013 easy weld electrodesStone bridge brand MILD STEEL WELDING ELECTRODES STANDARD: AWS E6013 6013 easy weld electrodesSize: 2.5MM X 300MM (Packing: 2.5kg/inner boxes 8 boxes/cartons=20kg)Size: 3.2MM X 350MM (Packing: 5.0kg/inner boxes 4boxes/cartons=20kg)Size: 4.0MM X 400MM (Packing: 5.0kg/inner boxes 4boxes/cartons=20kg)
KEY FEATURES
J506Fe according with GB E5018
Corresponding with AWS E7018
Introduction: J506Fe is a kind of carbon steel electrode with iron powder low-hydrogen potassium type coating
AC/DC
Deposition efficiency can be improved due to the iron powder in the coating
It has stable arc, fewer spatters, good slag detachability and excellent welding performance
Deposited metal has excellent mechanical properties
All-position welding
Uses: used for welding carbon steel and low-alloy steel structures, such as 16Mn and more
King Flex Inverter Welding Machine - 200ans - 4.4 KVA
Description
King flex
dc inverter welding machine 200A for your business or your home DIY welding
200 AMP can be used with most domestic power units. Output current that vary from 20 to 200Ans . The current level is indicated by the digital display unit on the welder. In case of excess power, an intelligent automatic switching chip detects the amount of voltage available and adjusts the settings to prevent over and under-voltage. It also protects the machines against overheating.
Features:
PANEL System for the best quality of welding
Digital display for easy verification of welding currentArc force system for preventing voltage fluctuationsAnti stick system for easy weldingAccessories: 2.5m cable + electrode holder, 2.5m cable + earth clamp
Model RH-4611Power 4.4 KVAVoltage 220VFrequency 50Hz
7pc Magnetic squares for welding which leave both hands free; magnetic welding holder for welding, soldering, assembly, marking, spreading, etc.
Sturdy and compact arrow design fixes your workpiece in a 45-degree, 90-degree or 135-degree angle & ndash; maximum application temperature: 140 & deg;C
Strong and versatile: welders magnet with 11.3 kg (25 lbs) and 4.5kg (10lbs) holding force & ndash; for flat, round and square-cut components
Delivery includes: 6pc welding magnet set / arrow magnetic welding clamp set 2 pc x 3 inch arrow type square and 4pc x Mini arrow square total 7 pcs.
Anti-Collision Anti-scratch - The design of the metal shell and resin edge banding is resistant
to collision and scratches. Made of high - quality steel, the magnet has strong suction, does not rust, and is durable.
Portable mini size lightweight welding machine, convenient to carry
Easy to adjust amperage for welding various materials
One knob control, support adjusting amperage ranging from 20 to 200A
High-frequency inverter features quick arcing and less welding splash
Suitable material: stainless steel, carbon steel, low alloy steel
220V
1GBT Technology
Digital display
Suitable for MMA Welding
Lightweight and Portable
Portable mini size lightweight welding machine, convenient to carry
Easy to adjust amperage for welding various materials
One knob control, support adjusting amperage ranging from 20 to 200A
High-frequency inverter features quick arcing and less welding splash
Suitable material: stainless steel, carbon steel, low alloy steel
220V
1GBT Technology
Digital display
Suitable for MMA Welding
Lightweight and Portable
no load volatage 60
insulation class F
protection class IP21S
350 AMP
PANEL System for the best quality of welding
Digital display for easy verification of welding current
Arc force system for preventing voltage fluctuations
Anti stick system for easy weldingAccessories: 2.5m cable + electrode holder, 2.5m cable + earth clamp
Model RH-4611
Power 9.4 KVA
Voltage 220VFrequency 50HzWeight 5.7kg
Description
300 AMP
PANEL System for the best quality of welding
Digital display for easy verification of welding current
Arc force system for preventing voltage fluctuations
Anti stick system for easy weldingAccessories: 2.5m cable + electrode holder, 2.5m cable + earth clamp
Model RH-4611
Power 9.4 KVA
Voltage 220VFrequency 50HzWeight 5.7kg
MAXMECH TIG-MMA INVERTER WELDING MACHINE-250A
DC TIG MMA INVERTER WELDING MACHINEBRAND NAME: MAXMECHMODEL: MMA- 250A HAS ALL THE ADJUSTABLE PARAMETERS NEEDED FOR THE TIG MMA WELDING PROCESS AND IS THEREFORE SUITABLE FOR A VARIETY OF WORKPIECESPULSE WELDINGALL WELDING PARAMETERS ARE EASILY IDENTIFIED WITH MATCHING GRAPHICS MAKING OPERATION EASY AND STRAIGHTFORWARD FULL DIGITAL DESIGN AND TIGHTLY INTEGRATED CIRCUITS GREATLY REDUCE INTERRUPTION AND FAILURE RATES. INPUT: 220 VOLTSIGBT TECHNOLOGYSUITABLE FOR MMA WELDINGLIGHTWEIGHT AND PORTABLEPOWER RATING: 6.8KVANOTE: MUST USE A GENERATOR 7KW AND ABOVE TO AVOID DAMAGE.
