DESCRIPTION:
The power and ground are brought out to a 4-pin male header. There are 2 pins ( & lsquo;+ & rsquo;) for the power and 2 pins ( & lsquo;- & lsquo;) for the ground which allows you to double-up the jumper wires if a fair amount of current will be drawn from the module to minimize voltage drop across them.
The Inventor 1.5HP Non-Inverter Air Conditioner offer excellent cooling in your home atmosphere. It is Eco-friendly and it comes with 2- year warranty, we offer reliability, high standard design, clean, comfortable and conducive air. Inventor Air Conditioner cools down rooms quickly and in a wide range of voltage conditions.
WIFI TECHNOLOGY: Increaseorreduce thetemperature ofyourairconditioner, from whereveryouare,justwithatouchofyourmobiledevicescreen, byslidingupwardsordownwardsdependingonthedesiredtemperatures.
ENERGY CLASS A: The higher and more efficient performance rating maximize your energy savings.
TURBO MODE: This function gives you a boost in cooling and heating power for a period and makes the room cool down or heat up rapidly.
AUTO ERROR DIAGNOSIS: Once abnormal operation or parts failure happens, the unit will shut off automatically to protect the system. Meanwhile, it will indicate protection or error code for fast service.
LOW AMBIENT COOLING: The outdoor unit special design produces an efficient and effective cooling operation even at 15 degree centegrade
INTELLIGENT DEFROST: Power saving and improved heating efficiency by intelligent defrost. Intelligent Defrost is achieved only by sensors that they control the need and duration of defrost process.
ANTI-COLD AIR FUNCTION: Indoor fan speed is regulated automatically from the lowest grade to the setting grade according to the evaporator temperature when the unit starts heating operation.SLEEP MODE: With the Sleep Mode, the air conditioner adjusts the room temperature for perfect sleeping conditions and energy savings.
3pin Electronic Potentiometer Volume 20pcs
ITEM DESCRIPTION
3PIN ADJUSTABLE POINTMETER VOLUME
This center-tap linear type potentiometer. The outer two pins will always show 10K resistance, the center pin resistance to one of the outer pins will vary from 10K Ohm to about 50 Ohm. The pot is linear meaning the resistance will vary linearly with its position. This is a good choice for general user interfaces.
This pot works great in a breadboard but on a few breadboards, you may have to trim off the large metal anchors
Satellite Signal Line + Coaxial Cable Plug - 100 Pcs
This is Satellite Signal Line Connector F connector for coaxial cable 100 pieces
It is used to connect cable signal from LNB to diseqc and LNB to satellite decoders.
You can also used to connect signal from antenna to your StarTimes, Free TV, GOTV, DSTV and all free to air satellite.
A coaxial RF connector (radio frequency connector) is an electrical conductor designed to work at radio frequencies in the multi-megahertz range.
RF connectors are typically used with coaxial cable and are designed to maintain the shielding that the coaxial design offers. Better models also minimize the change in transmission line impedance at the connection in order to reduce signal reflection and power loss.
As the frequency increases, transmission line effects become more important, with small impedance variations from connectors causing the signal to reflect rather than pass through.
An RF connector must not allow external signals into the circuit through electromagnetic interference.
AC Power Socket - 10pcs
Item description
AC power socket
Product Specifications
Operating temperature range 40 85c
Rated voltage AC 250V
Insertion force 3 2ON
Rated current 2.5A 5A
Insulation resistance 100MQ
Application Suitable for televisions, LCP, PDP, computers, notebooks, chargers, home appliances, audio-visual, film and television and other fields.
Package Conetent 10pcs x AC power socket
, LCP, PDP, computers, notebooks, chargers, home appliances, audio-visual, film and television and other fields.
Package Conetent 10pcs xAC power socket
An electrolytic capacitor uses an electrolyte (a liquid or gel containing a high concentration of ions) to achieve a large capacitance than the other capacitor types. These electrolytic capacitors are polarized, meaning that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. They are commonly used as filters in devices in various power supplies to reduce the voltage ripple as well as input and output smoothing as an LPF.
Features: - Stable, low impedance characteristics - Ripple Current mA rms: 1210 - Ripple current measured at 105 & deg;C 100kHz - Impedance: 0.06 - Impedance: max at 20 & deg;C 100kHz - Low D.C. leakage current - Extended life - high reliability withstanding 2,000 to 4,000 hours load life at 105 & deg;C - Radial leads on standard pitch
Carbon film potentiometer, single unit with switch design. Total resistance 0-10k ohm, total rotational angle 230+/-10 degree.
Product name: carbon film potentiometer with switch; model no. : rv12sk6; total resistance : 0-10k ohm
Resistance tolerance: +/- 20%; power rating : 0. 1W; max. Operating Voltage: 150V AC
Insulation resistance: more than 500m ohm at DC 500V; withstand Voltage: 1 minute at AC 500V; diameter: 12. 5mm / 0. 49"
Shaft size : 3. 5 x 2. 1mm / 0. 137" x 0. 08"(L*w); overall size : 13 x 11. 5mm / 0. 51" x 0. 45"(Diameter*h)
Weight : 1G; package content : 20 pieces x carbon film potentiometer with switch
Audio Small Jack Socket And Small Jack Plug Connectors - 10 Pairs
Product Description
AUDIO SMALL JACK SOCKET AND AUDIO SMALL JACK PLUG CONNECTORS-10PAIRS
1/4 inch or 6.35mm audio Socket ( Female ). Plastic Mould and jack socket
The 1/4-inch connectors are very common on musical instruments (especially guitars), and other staging devices such as effects pedals, mixing consoles, speakers and amplifiers.
Light design , Plastic construction.
The 1/4-inch connectors may have only a tip and sleeve, or a tip, ring and sleeve (TRS)...Soldering required (Please use flat blade solder tip to carry out ).
Suitable for the cable up to 7mm, if your cable is too thin, just use some sleeve to hold it properly to avoid the movement
Quantity 10pairs MALE AND FEMALE
Big Fuse Holder With 10 Glass Fuse - 10a 250v Bottom Flat Thread Panel Mounted Screw
10pcs Big Fuse Holder With 10 Glass Fuse 10a 250v Bottom Flat Thread Panel Mounted Screw
ITEM DESCRIPTION
10pcs big Fuse Holder With 10 Glass Fuse 15A 250V Bottom Flat Thread Panel Mounted Screw Cap Fuse Holder Fuse Tube Holder for 6x20mm Type
Fuse Black
Panel mounted fuse holder with quick blow glass tube fuse, suits for Car Radio Audio DIY project.
Made from superior plastic and metal. Durable and long lasting.
This panel mounted fuse holder is suitable for 5x20mm type fuse. With screw cap and soldering terminals.
Flame Retardant Shell
The plastic shell is made of insulating material, which is not easy to burn after fire, and automatically extinguishes after leaving the fire source to
ensure the stability of work
The motorized rotating display stand is ideal for displaying jewelry, watches, digital products, bags, models, collectibles, crystal, acrylic, 3D glass statues; it is a good gift for most occasions and good for shops, studios, school libraries, showrooms, living rooms and other places. Tips: It is recommended to place the items in the middle of the rotating display stand
360 Degree Rotation: R/L rotates counterclockwise or clockwise, you can adjust according to the different angles of display products; before applying, you can tear off a layer of film on the base of the display, connect the USB data line, and adjust the left and right direction keys
2 kinds of power supply modes: USB and rotary operated, compatible with computer, laptop, power bank or any other with USB adapter, but also compatible with 1 D battery (not included); rotating left or right can be turned on, the key moves to the middle, the turntable will pause
What you receive: each kit contains 2 pieces of motorized rotating stand that are in the same size with 2 USB power cables, which are enough to meet the needs of different occasions and available in black lenses or white lenses; the battery we mentioned is not included
Product information: The 360 degree electric rotating diameter is approx. 7.87 inches, gross weight about 12.56 oz; the display base is made of ABS material and with 2-4 RPM rotation speed, which can hold up to 6.6 lbs. Each individually packaged
Description:
Positive power supply board. Its basically takes an input of 4.5-15V DC and outputs a constant voltage of 3.3V. It can supply a maximum of 0.8A of current at 3.3V.The board comes with appropriate rectification, filtering circuit, a power indication LED. The module is very useful for the products which demand 3.3V at 800mA of current. It equips 3 pins where you can plug-in input and output, This offers ease of connection.The Power Supply Mini Board is the ideal solutions, providing a positive supply at constant out for projects & systems etc.Feature:
Suitable for 4.5-15V AC/DC input with PCB Terminals
Power LED for Outputs
+3.3V Output Termination Points
Suitable for use with most +3.3V Microcontrollers
Dimensions: 13mm x 9 mm
Package Includes:
3.3V AMS1117 800ma power supply module
Note:
Please do not work above the operating voltage, or it will be damaged easily.
The input voltage must be 1.5V or 2V higher than the output voltage, otherwise, it can not output enough power.
Please do not reverse polarity, or it will be damaged because of a short circuit.
Datasheet:
//cdn.shopify.com/s/files/1/2822/2674/files/ds1117.pdf?3161997491528035188