CMEC 900FH 90GPH Fuel Filter Turbine Water Separator 900 SERIES Diesel Marine
100% Brand New
Professional Installation is Highly Recommended(No Instruction Included)
Maximum Flow Rate: 90 GPH
Height: 17''
Width: 6''
Depth: 7''
Port Size: 7/8"-14UNF
Element: 2040
Element Removal Clearance:5"
Package Includings
1 x Fuel Water Separator
As the pictures shown
CMEC 900FH diesel turbine fuel filter is designed to protect your precious engine components from various contaminants such as dirt, rust, algae, asphaltenes, varnishes and water.
The CMEC 900FH marine turbine is designed to be fitted on the vacuum side of the fuel transfer pump for maximum efficiency. The CMEC turbines work through a three stage process; Separation Coalescing & Filtration explained below.
Stage One: Separation: As fuel enters into the filter assembly; it moves through the turbine centrifuge and spins off large solids and water droplets which fall to the bottom of the collection bowl.
Stage Two: Coalescing: Small water droplets bead-up along the sides of the chamber and on the element, once heavy enough these too fall into the bottom of the collection bowl.
Stage Three: Filtration: Algae, rust and dirt are then filtered from the fuel by the Aquabloc element, as the elements are waterproof they are much more effective and long lasting than water absorbing elements.
The CMEC 900FH diesel filter comes complete fitted with a see-through bowl and a 10 micron element. The turbine has a maximum flow rate of 341 LPH through a port size of 7/8"-14 UNF.
Replacement CMEC turbine elements (2040 series) are available to order with various micron ratings. Racor 2040 turbine elements measure 110mm diameter x 118mm high.