Buy New Arrival Felicity Charge Controller Auto-adjustable - 60a-12V/ 24V/ 48V in Nigeria
You May Also Like
Solar Controller 12v/24v - 30a Regulator - LCD Display + Dual USB 5v Output
₦ 9,900.00
₦ 15,000.00
-34%
Solar Controller 12v/24v 10a Regulator Pwm Battery Charger Lcd Display Dual Usb 5v Output
₦ 7,900.00
₦ 10,000.00
-21%
Kg316t-ii Digital Lcd Weekly Programmable Timer Electric Relay Time Switch
₦ 12,125.00
₦ 12,500.00
-3%
Featured Products
000RENG427351
Rehmie.com.ng
120A MPPT Felicity Solar Charge Controller - 12V-24V- 48v
Weight
6.00 kg
A Mppt ( Maximum Power Point Tracking), or Maximum power point tracker is an electronic DC to DC Converter that optimizes the match between the solar array (PV panels),and the battery Bank or utility grid. Simply put, they convert a higher voltage DC output from the solar panels ( and a few wind generators) down to the lower voltage needed to charge batteries.
Compare to conventional PWM controllers, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed.
This solar charge controller is an advanced solar charger with maximum power point tracking. The intelligent MPPT algorithm. Allows the solar charge controller to extract maximum power from the solar arrays by finding the maximum power point of the arrays.
The MPPT battery charging process has been optimized for long battery life and improved system performance. Self-diagnostics prevent damage when installation errors or system faults occur. This charger also features a multifunctional LCD with communication ports for remote battery temperature and voltage measurement.
Advantages of this MPPT Charge Controller include:
Intelligent Maximum Power Point Tracking Technology
Compatible for PV system in 12v, 24v or 48v
Three stage charging optimizes battery performance ( Two stage charging in lithium battery mode)
Maximum charging current up to 30A/45A/70A
Maximum efficiency up to 98%
Automatic battery Voltage detection (Lithium battery voltage need to be set manually)
Support Lithium battery,Lead acid battery, AGM and Gel battery
Integrated intelligent slot compatible with MODBUS communications
000RENG427376
Rehmie.com.ng
Solar Charge Controller 100a 12/24/36/48v Auto
PWM Solar Charger Controller - 100AmpsInput Voltage 12/24/36V/48VVisual LCD graphic symbolBrief key operationGrade auto switch of system voltageIntelligent PWM Charging ModeAuto temperature compensationAdjustable charging & discharging parameterSettable working modes of loadsAccumulative function of charging & dischargingProtection for battery back dischargingLow Voltage Protection12V at 10.5v24V at 21.4v36v at 32.10v48v at 42.80v
Overloading & short-circuit protectionBattery reversed protectionDelayed auto restart after overloading protectionModel: 100A PWM Solar Charge ControllerRated working voltage :12V/24V/36V/48V DC AUTOSystem Pan Voltage- 15v-23v(12v)30v-45v (24v)45v-69v (36v)60v-90v (48v)Float charging voltage (settable) :13.8V/27.6V/41.1V/55.2VLow voltage recovery (settable) :11.5V/23.0V/34.5/46VNo load loss : Temperature compensation :-4mInstallable maximum cable:3# AWG (25mm2)Working temperature: -30 -70Weight: 1.60kgCharging mode: PWMSolar panel power: 1200W/12V; 2400W/24V;36V3600W;48V/4800WColour:;Black
Specification
Model Number SY48100A
ApplicationCharger ControllerWork Time (h)24 hoursMax PV Power4800WMax PV Voltage950VProduct nameMPPT Solar Charge ControllerDisplayLCD ScreenPWM efficiency98-99%Rated Current100A
Solar Charge Controller 100a 12/24/36/48v Auto
000RENG427382
Rehmie.com.ng
60a Mppt Felicity Solar Charge Controller - 12v - 24v- 48v
Felicity Solar 60A MPPT Solar Charge Controller (12V/24V/48V)
The Felicity Solar 60A MPPT Charge Controller is an advanced DC-to-DC converter designed to maximize the efficiency of your solar power system. By utilizing cutting-edge Maximum Power Point Tracking (MPPT) technology, it ensures optimal power transfer from solar panels to your battery bank or utility grid, delivering up to 20% more charging efficiency compared to traditional PWM controllers.
This controller is compatible with 12V, 24V, and 48V systems, making it versatile for various solar applications. Its intelligent MPPT algorithm dynamically tracks the solar array & rsquo;s maximum power point, optimizing energy harvest and battery charging for longer system lifespan and performance.
Key Features:
Intelligent MPPT Technology: Increases charging efficiency and reduces solar panel requirements.
Broad Compatibility: Supports 12V, 24V, and 48V battery systems, including Lithium, Lead-Acid, AGM, and Gel batteries.
High Efficiency: Achieves up to 98% efficiency for maximum energy conversion.
Smart Battery Charging: Features three-stage charging (two-stage for lithium batteries) to enhance battery performance and longevity.
User-Friendly Interface: Integrated multifunctional LCD display for real-time monitoring and advanced system diagnostics.
Safety Mechanisms: Built-in self-diagnostics prevent damage from installation errors or system faults.
Remote Connectivity: Includes MODBUS communication compatibility for seamless remote monitoring and system control.
Technical Specifications:
Charging Current: 30A/45A/70A (maximum 60A capacity)
Weight: 6.00 kg
Warranty: 6 months
Whether you're installing a solar system for residential, commercial, or industrial use, the Felicity Solar 60A MPPT Charge Controller is a reliable choice for optimized energy management and battery protection.
000RENG427396
Rehmie.com.ng
60amps 12V/24V/36V/ 48V Pwm Solar Charge Controller
60A-12V/24V/48V Smart Charging PWM + LCD Display solar charge controller delivered physically through rehmie.com.ng: is an intelligent, multi-purpose solar controller. It has a fixed LCD and an amicable user interface. Its PMW smart charging capabilities are one of the industry's latest innovations which complements its Temperature compensation sensor(extends battery life in most systems by at least 20% in Tropical Zones.This solar charge controller's various control parameters can be flexibly set to meet your application requirements.
Benefits:1. Data such as voltage, current, and state of charge can also be displayed digitally as figures on the display.2. It has a large surface area of connection ports for wire gauge 4mm-16mm3. It is cheaper than the MPPT controllers and outperform many of them.
Product property:1. Overload protection 2. Short circuit protection3. Converse discharge protection4. Reverse polarity connection protection5. Thunder protection6. Low voltage protection7. 60A-12V/24V/48V auto switch 8. Charges all battery types: Gel, Fluid, Lithium, Vrla, etc.
More benefits:1 Automatic Identification System Voltage, 12V 24V auto recognition.2 Humanized LCD displaying and double button operation of man-machine interface.3 Completed technical data for setup and modification.4 High-efficiency intelligent PWM 3-stage charging.5 The load control mode can be selected, and the timer function can be reset for street lights at night.6 Reliable over-voltage protection, short circuit protection, overload protection, overcharge protection, and over-discharge protection.7 Accurate temperature compensation. Corrects charging and discharging voltage automatically. Improves the battery lifetime.8 Roundly reverse connect protection.9 Solar Panels, Battery, and Solar Charge Controller positive poles are connected, adopting negative MOSFET in a series control circuit.
Weight
3.00 kg
Warranty Period
3 Months
000RENG427400
Rehmie.com.ng
60a Pwm Solar Charge Controller 60a /12/24/36/48v
Weight
0.50 kg
PWM solar charger controller - 60amps Input voltage 12/24/36v/48v PV Input Range 100vVisual LCD graphic symbol brief key operation grade auto switch of system voltage intelligent pwm charging mode Auto temperature compensation Adjustable charging & discharging parameter Settable working modes of loads accumulative function of charging & discharging protection for battery back discharging protection for battery low voltage overloading & short-circuit protection battery reversed protection delayed auto restart after overloading protection model: 60a PWM solar charge controller rated working voltage:12v/24v/36v/48v dc auto rated working current:60a voltage of solar panel 48v float charging voltage (settable) weight: 800g Panel PV Input: 720w/12v;1440w/24v/2100w/36v/2160w/48v/2880wSuitable for all battery types including Lithium batteries equipped with 2 USB 5v/2A charging terminals
000RENG427416
Rehmie.com.ng
100A Mppt Solar Charge Controller
Weight
0.50 kg
100A MPPT SOLAR CHARGE CONTROLLER SERIES delivered physically through rehmie.com.ng.
MPPT series solar charge controller with the most advanced MPPT control algorithm and the maximum power point of the pv array can quickly track in any environment so that it can get the maximum energy from the solar panel and significantly improve the utilization of energy in solar system.Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed.
Compatible for PV systems in 12V, 24V or 48V.Maximum charging current up to 30A / 45A / 60A / 80A / 100A / 120A.Automatic battery voltage detection.Supports lithium battery and various lead-acid batteries, AGM, gel battery, etc.Integrated intelligent slot compatible with MODBUS communication.LCD displayAdvance MPPT technology.4-stage charge management.Built-in short, or open circuit protection.Built-in reverse polarity or overload protection.Reverse current protection.Low heat protection.
000RENG427421
Rehmie.com.ng
Solar Charge Controller - 30a Pwm
Weight
0.30 kg
Solar Charge Controller 30A Solar Panel Battery Controller PWM Solar Controller Intelligent Regulator Adjustable LCD Display
Description: Type:Solar Power Meters Material:ABS+component Power:12V/24V Display Type:LCD Display Interface:Dual USB Package List: 1x Solar Panel Battery Charge Controller Feature: Security instructions: 1. Make sure that the battery has enough voltage for the controller to recognize the type of battery before first installation. 2. The battery cable should be as short as possible to minimize losses. 3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL It is not suitable for nickel metal hydride batteries, lithium ions or batteries. 4. The charge controller is only suitable for the regulation of solar modules. Never connect another load source to the charge controller.
Characteristics: 1. Build-in industrial microcontroller. 2. One-key configuration, digital display, automatic memory function. 3. Fully pwm-load management load. 4. Build-in short circuit protection, open circuit protection, reverse protection, over load protection 5. Dual mosfet Reverse current protection, low heat productions. Connection of the system: 1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery. 2. Connect the photovoltaic module to the plus and minus regulator. 3. Connect to the consumer for the charge controller plus and minus. the reverse order applies when uninstalling! An incorrect sequence order can damage the controller! Notes: 1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2.Please allow 1-3cm measuring deviation due to manual measurement
000RENG427441
Rehmie.com.ng
100a Mppt Solar Charge Controller
Weight
0.50 kg
100A MPPT SOLAR CHARGE CONTROLLER
MPPT series solar charge controller with the most advanced MPPT control algorithm and the maximum power point of the pv array can quickly track in any environment so that it can get the maximum energy from the solar panel and significantly improve the utilization of energy in solar system.Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed.
Compatible for PV systems in 12V, 24V or 48V.Maximum charging current up to 30A / 45A / 60A / 80A / 100A / 120A.Automatic battery voltage detection.Supports lithium battery and various lead-acid batteries, AGM, gel battery, etc.Integrated intelligent slot compatible with MODBUS communication.LCD displayAdvance MPPT technology.4-stage charge management.Built-in short, or open circuit protection.Built-in reverse polarity or overload protection.Reverse current protection.Low heat protection.
000RENG427460
Rehmie.com.ng
Mppt Solar Charge Controller 80a 12/24v/36/48v Auto
2024 Advanced MPPT Solar Controller
This is an advancement on all existing MPK series
Model - MPK2-80
Open Circuit Voltage - 150v Max
System Voltage - 12/24/36/48v Auto
MIN PV voltage - 60v
Rated Current - 80A
PV Maximum Input Power
12v - 1040w
24v - 2080w
36v - 3120w
48v - 4180w
Compactible with all battery types - Flooded, tubular, AGM, GEL, Lithium and User define.
It also also allows you set your own battery charging parameters.
Self-consum & le;35mA(48v)
MPPT highest accuracy 99%
Max charging efficiency 97%
Charging control mode Mult-stage(MPPT, absorption,float, equalication, CV)
Floating charge 13.8v/27.6v/41.4v/55.2v
Boost charge 14.4v/28.8v/43.2v/57.6v
Equalization charge 14.6v/29.2v/43.8v/58.4v
LVD 10.8V/21.6V/32.4V/43.2V
LVR 12.6V/25.2V/37.8V/50.4V
This advance model is multiple protections
1. Short Circuit Protection
2. Overcharge Protection
3. Reverse Polarity Protection
4. Open Circuit Protection
5. Over Discharge Protection
It comes with a beautiful very comprehensive colour display screen.
Equipped with a strong fan and alloy aluminum body for effective heat dissipation
Weight - 4.6kg
It is very user friendly and with a comprehensive colour screen
000RENG427483
Rehmie.com.ng
20a Solar Charge Controller
Solar Charge Controller 20A Solar Panel Battery Controller PWM Solar Controller Intelligent Regulator Adjustable LCD Display
Description: Type:Solar Power Meters Material:ABS+component Power:12V/24V Display Type:LCD Display Interface:Dual USB Package List: 1x Solar Panel Battery Charge Controller Feature: Security instructions: 1. Make sure that the battery has enough voltage for the controller to recognize the type of battery before first installation. 2. The battery cable should be as short as possible to minimize losses. 3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL It is not suitable for nickel metal hydride batteries, lithium ions or batteries. 4. The charge controller is only suitable for the regulation of solar modules. Never connect another load source to the charge controller.
Characteristics: 1. Build-in industrial microcontroller. 2. One-key configuration, digital display, automatic memory function. 3. Fully pwm-load management load. 4. Build-in short circuit protection, open circuit protection, reverse protection, over load protection 5. Dual mosfet Reverse current protection, low heat productions. Connection of the system: 1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery. 2. Connect the photovoltaic module to the plus and minus regulator. 3. Connect to the consumer for the charge controller plus and minus. the reverse order applies when uninstalling! An incorrect sequence order can damage the controller! Notes: 1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2.Please allow 1-3cm measuring deviation due to manual measurement
000RENG427491
Rehmie.com.ng
30a Solar Controller 12v/24v
Solar Charge Controller 30A, 12V/24V Solar Panel Battery Controller PWM Solar Controller Intelligent Regulator Adjustable LCD Display Description: Type:Solar Power Meters Material:ABS+component Power:12V/24V Display Type:LCD Display Interface:Dual USB Package List: One 30A Solar Panel Battery Charge Controller PWM and manual
Instructions: 1. Make sure that the battery has enough voltage for the controller to recognize the type of battery before first installation.
2. The battery cable should be as short as possible to minimize losses.
3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL It is not suitable for nickel metal hydride batteries, lithium ions or batteries.
4. The charge controller is only suitable for the regulation of solar modules. Never connect another load source to the charge controller.
Characteristics:
1. Build-in industrial microcontroller.
2. One-key configuration, digital display, automatic memory function.
3. Fully PWM-load management load. 4. Build-in short circuit protection, open circuit protection, reverse protection, over load protection
5. Dual MOSFET Reverse current protection, low heat productions.
Connection of the system: 1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery. 2. Connect the photovoltaic module to the plus and minus regulator. 3. Connect to the consumer for the charge controller plus and minus. the reverse order applies when uninstalling! An incorrect sequence order can damage the controller! Notes: 1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2.Please
allow 1-3cm measuring deviation due to manual measurement. can work well with 6 pieces of 250wat solar panel.
000RENG427503
Rehmie.com.ng
Solar Charge Controller Mppt 12v 24v 48v 60a
Weight
1.00 kg
MPPT technology1. Clock timing function2. Regulatory mechanism of temperature compensation(Only available in30A/40A/50A/60A)3. Ultra Low Power Consumption4. Built-in solar data monitoring interface(RS485)(Only available in30A/40A/50A/60A)5. LCD Display with backlight6. Good heat dissipation effect with less noise7. Light control mode, Time control mode8. Reverse protection, short circuit protection9. Designed for 12V/24V/48V solar power system10. Hanging style design makes it convenient to install
Working Mode
There are several common working mode of MPPT solar controller: 1. Button Mode (Manual switching load)2. Light Controlled Mode (Load switch is controlled by solar panelsPhotosensitive control and timing control)3. Light control turn on delay off mode. 4. Circulation model (With Clock Fuction)5. MPPT charging mode, Maximum power point tracking automatically
Protection
*PV array short circuit*over discharge Protection*Discharge voltage protection*IP21 Mechanical protection*Load overload*the input low voltage protection*PV Lightning protection*Battery reverse polarity*The overcharger protection voltage
Application
MPPT Solar Power Controller of light and night away less than 10 ma power flow, ideal for small power solar products, such as solar street lamp light, streetlight, DC Load, illumination, solar power system and so on.
