Featured Paints Products in Nigeria

Filter By

Price

₦

Shipped from

Overseas

Nigeria

Featured Paints Products Products

Sort by :

Multipurpose Painting Brush

₦ 3,069.00 ₦ 3,100.00 -1%

20l Matt Paint - White

₦ 84,358.00 ₦ 85,210.00 -1%

A1 - Waterproof Putty Hybrid 3x Wall Protection- 20L

₦ 29,700.00 ₦ 30,000.00 -1%

Infiniterra Economy Satin

₦ 65,538.00 ₦ 66,200.00 -1%

Original Painting Brush

₦ 8,415.00 ₦ 8,500.00 -1%

Multipurpose Brush - 5pcs - Size 2

₦ 5,841.00 ₦ 5,900.00 -1%

Multipurpose Painting Brush - Size 3

₦ 3,465.00 ₦ 3,500.00 -1%

20l Satin Paint - White

₦ 100,089.00 ₦ 101,100.00 -1%

Sandtex Vinyl Matt Emulsion is a ready-mix matt finish for walls, facades and ceiling without standing hiding power and colour retention properties. It has a good flow and gives a smooth, durable finish. It inhibits mould growths in humid conditions. available in Double Quality and Standard Quality TYPICAL USES For Interior use only. The product can be applied on cement plaster, stucco filler, concrete, asbestos cement sheeting and rendered block work. PRODUCT INFORMATION Color Available: White Finish Smooth Matt Finish. Packaging 20 Ltrs Theoretical Coverage 10- 12m2/L per 1 coat. Drying time: Under normal drying conditions touch dry in 1-2 hours and recoatable after 4 hours, 2-4hrs between coat. Allow for adequate ventilation during the drying period. Hard drying Time 24 hrs Shelf Life 12 months Coating System Apply two coats as required. Certain colors may require additional Coats to give complete obliteration STORAGE Do not use or store in extremes of temperature and protect from frost. APPLICATION Stir well before use. Apply by brush or medium roller. Always intermix packs for colour consistency. Please check for colour accuracy prior to application. SURFACE PREPARATION Ensure all Surfaces are free of dirt, loose particles, grease and other surface contaminants. All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery surfaces should be primed with one coat of Sandtex Stabilising Solution. Polished or dense surfaces should be primed HEALTH & SAFETY PRECAUTION Avoid inhalation, avoid skin and eye contact by using gloves, goggles, and face masks. Provide adequate ventilation. If product comes in contact with skin, wash thoroughly with plenty water and soap. If the eyes are contaminated flush with water up to 15minutes and seek medical attention.

Vme - Vinyl Matt Emulsion Paints - 20L - White

₦ 47,055.00 ₦ 47,530.00 -1%

Sandtex Finebuild is a ready mixed easy to apply textured wall finish for interior and exterior use which neither flakes nor peel when correctly applied to a suitable backing. Its composition principally consists of synthetic resin base, selected aggregates, selected pigments, and biocides to provide excellent resistance against algae growth and fungi. TYPICAL USES Suitable surface for Sandtex Finebuild are cement rendering Concrete, concrete bricks and blocks including light asbestos cement weight. PRODUCT INFORMATION Colour White Pack size 20 Ltrs Theoretical Coverage 1- 1.5m2/L per Hard drying Time 24 hrs Shelf Life 12 months For Application use Roller STORAGE 12 months. APPLICATION Stir well before use. Apply by brush or medium roller. Always intermix packs for color consistency. Please check for color accuracy prior to application. SURFACE PREPARATION Ensure all Surfaces are free of dirt, loose particles, grease and other surface contaminants. All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery surfaces should be primed with one coat of Sandtex Stabilising Solution. Polished or dense surfaces should be primed coat for other emulsion and screeded wall that has been stabilized by Sandtex stabilizing solution. For interior areas that are likely to suffer mould growth use, Sandtex sterilizing solution before application. HEALTH & SAFETY PRECAUTION Avoid inhalation, avoid skin and eye contact by using gloves, goggles, and face masks. Provide adequate ventilation. If product comes in contact with skin, wash thoroughly with plenty water and soap. If the eyes are contaminated flush with water up to 15minutes and seek medical attention.