Raspberry Pi Pico W With Pre-Soldered Header, Built-in WiFi
↑ ↑BrandwaveshareItem Weight1.13 ouncesProduct Dimensions2.01 x 0.83 x 0.12 inchesItem Dimensions LxWxH2.01 x 0.83 x 0.12 inchesColorPico W with pre-soldered headerProcessor BrandARMProcessor Count2ManufacturerWaveshareDate First AvailableOctober 24, 2022BrandwaveshareColorPico W with pre-soldered headerConnectivity TechnologyWi-Fi, USB, I2CCPU ManufacturerARMProcessor Count2About this itemRaspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication.26 x multi-function GPIO pins: configurable pin function, allows flexible development and integrationBuilt-in Wi-Fi: Onboard Infineon CYW43439 wireless supports 2.4/5 GHZ Wi-Fi 4Dual-core Arm processor: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHzC/C++, MicroPython support: Comprehensive SDK, dev resources, tutorials to help you easily get startedProduct DescriptionBoard specificationsBased on Raspberry Pi Pico, Raspberry Pi Pico W board with pre-soldered header comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication.RP2040 microcontroller designed by Raspberry Pi in the United KingdomDual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHzOnboard Infineon CYW43439 wireless supports 2.4/5 GHZ Wi-Fi 4264KB of SRAM, and 2MB of on-board Flash memoryCastellated module allows soldering direct to carrier boardsUSB 1.1 with device and host supportLow-power sleep and dormant modesDrag-and-drop programming using mass storage over USB26 x multi-function GPIO pins2 x 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channelsAccurate clock and onTemperature sensorAccelerated floating-point libraries on8 x Programmable I/O (PIO) state machines for custom peripheral supportPackage ContentRaspberry Pi Pico W board with pre-soldered header x13PIN yellow pin header x1USB Type A to micro cable x1Key FeaturesBrand : waveshareItem Weight : 1.13 ouncesProduct Dimensions : 2.01 x 0.83 x 0.12 inchesItem Dimensions LxWxH : 2.01 x 0.83 x 0.12 inchesColor : Pico W with pre-soldered headerProcessor Brand : ARMProcessor Count : 2Manufacturer : WaveshareDate First Available : October 24, 2022What's In the Box1 x X301 V1.0 Expansion Board4 x M2.5x12 mm F/F Spacers4 x M2.5x5mm Screws2 x M2.5x10mm Screws2 x M3x5mm Screws (to fix HDD)
Raspberry Pi Pico W With Pre-Soldered Header, Built-in WiFi
↑ ↑BrandwaveshareItem Weight1.13 ouncesProduct Dimensions2.01 x 0.83 x 0.12 inchesItem Dimensions LxWxH2.01 x 0.83 x 0.12 inchesColorPico W with pre-soldered headerProcessor BrandARMProcessor Count2ManufacturerWaveshareDate First AvailableOctober 24, 2022BrandwaveshareColorPico W with pre-soldered headerConnectivity TechnologyWi-Fi, USB, I2CCPU ManufacturerARMProcessor Count2About this itemRaspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication.26 x multi-function GPIO pins: configurable pin function, allows flexible development and integrationBuilt-in Wi-Fi: Onboard Infineon CYW43439 wireless supports 2.4/5 GHZ Wi-Fi 4Dual-core Arm processor: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHzC/C++, MicroPython support: Comprehensive SDK, dev resources, tutorials to help you easily get startedProduct DescriptionBoard specificationsBased on Raspberry Pi Pico, Raspberry Pi Pico W board with pre-soldered header comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication.RP2040 microcontroller designed by Raspberry Pi in the United KingdomDual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHzOnboard Infineon CYW43439 wireless supports 2.4/5 GHZ Wi-Fi 4264KB of SRAM, and 2MB of on-board Flash memoryCastellated module allows soldering direct to carrier boardsUSB 1.1 with device and host supportLow-power sleep and dormant modesDrag-and-drop programming using mass storage over USB26 x multi-function GPIO pins2 x 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channelsAccurate clock and onTemperature sensorAccelerated floating-point libraries on8 x Programmable I/O (PIO) state machines for custom peripheral supportPackage ContentRaspberry Pi Pico W board with pre-soldered header x13PIN yellow pin header x1USB Type A to micro cable x1Key FeaturesBrand : waveshareItem Weight : 1.13 ouncesProduct Dimensions : 2.01 x 0.83 x 0.12 inchesItem Dimensions LxWxH : 2.01 x 0.83 x 0.12 inchesColor : Pico W with pre-soldered headerProcessor Brand : ARMProcessor Count : 2Manufacturer : WaveshareDate First Available : October 24, 2022What's In the Box1 x X301 V1.0 Expansion Board4 x M2.5x12 mm F/F Spacers4 x M2.5x5mm Screws2 x M2.5x10mm Screws2 x M3x5mm Screws (to fix HDD)
Isolated RS485 RS232 Expansion HAT Board For Raspberry Pi
↑ ↑BrandwaveshareItem Weight1.76 ouncesProduct Dimensions2.56 x 2.22 x 0.2 inchesItem Dimensions LxWxH2.56 x 2.22 x 0.2 inchesColorRS485 RS232 Expansion HATManufacturerWaveshareDate First AvailableMarch 13, 2022BrandwaveshareColorRS485 RS232 Expansion HATConnectivity TechnologyGPIOAbout this itemIsolated RS485 RS232 Expansion HAT for Raspberry Pi (4B/3B+/3B/2B/Zero/Zero 2 W/Zero 2 WH). Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.Using SC16IS752 and SP3485, SP3232 multi combination scheme, can realize to RS485, RS232, the communication rate is up to 921600bps. Support RS485 and RS232. RS232: full-duplex communication, SP3232 RS485: semi/full-automatic communication, SP3485Overcurrent/Overvoltage proof, High Stability. Onboard TVS (transient voltage suppression tube), which can effectively suppress the surge voltage and transient peak voltage in the circuit, and protect against lightning and static electricity. Onboard power supply and serial port indicators, easy to check the module power supply and communication status.Lead out the control interface for easy access to main control boards such as Arduino. Provide complete supporting information manuals (C and python sample programs and user manuals, etc.)Product DescriptionInstructionRS485 RS232 HAT is an isolated RS485 and RS232 expansion board specially designed by Waveshare for Raspberry Pi. It adopts SC16IS752+SP3485, SP3232 scheme, built-in power isolation, ADI magnetic coupling isolation and TVS and other protection circuits.FeaturesBased on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboardsUsing SC16IS752 and SP3485, SP3232 multi combination scheme, can realize to RS485, RS232, the communication rate is up to 921600bpsRS485 supports manual or automatic sending and receiving of data, which can be set by DIP switchRS485 onboard resettable fuse and protection diode can ensure stable output of current and voltage, prevent overcurrent and overvoltage, and improve shock resistanceOnboard TVS (transient voltage suppression tube), which can effectively suppress the surge voltage and transient peak voltage in the circuit, and protect against lightning and static electricity.Onboard power supply and serial port indicators, easy to check the module power supply and communication statusLead out the control interface for easy access to main control boards such as ArduinoProvide complete supporting information manuals (C and python sample programs and user manuals, etc.)SpecificationsSerial port expansion SC16IS752RS485 SP3485RS232 SP3232Communication InterfaceCommunication rate： 300~921600 bpsOperating Voltage： 3.3/5VDimension： 65mm x 56.5mmVia diameter： 3.0mmPackage ContentRS485 RS232 HAT x12X20PIN header x1Standoffs pack (2pcs) x1Key FeaturesBrand : waveshareItem Weight : 1.76 ouncesProduct Dimensions : 2.56 x 2.22 x 0.2 inchesItem Dimensions LxWxH : 2.56 x 2.22 x 0.2 inchesColor : RS485 RS232 Expansion HATManufacturer : WaveshareDate First Available : March 13, 2022What's In the Box10 Inch Security Monitor1 x HDMI Cable1 x AV Cable1 x VGA Cable1 x USB Power Cable1 x Power Adapter1 x Remote Control1 x Bracket with Double-sided Adhesive1 x User Manual
Waveshare Accessory Compatible With Raspberry Pi 4 Model B
↑ ↑RAM4 GBWireless TypeBluetooth, 5 GHz Radio Frequency, 802.11ac, 2.4 GHz Radio FrequencyBrandwaveshareRam Memory Installed Size4 GBConnectivity TechnologyUSBWireless TypeBluetooth, 5 GHz Radio Frequency, 802.11ac, 2.4 GHz Radio FrequencyProcessor Count4Product DescriptionWIKI: waveshare.com/wiki/PI4BKey FeaturesBluetooth, 5 GHz Radio Frequency, 802.11ac, 2.4 GHz Radio FrequencyBluetooth, 5 GHz Radio Frequency, 802.11ac, 2.4 GHz Radio FrequencyRAM : 4 GBWireless Type : Bluetooth, 5 GHz Radio Frequency, 802.11ac, 2.4 GHz Radio FrequencyWhat's In the BoxGeeekPi
Aokin For Raspberry Pi Camera Module, 5MP 1080P With OV5647
↑ 1 Pcs Camera with 15cm Cable ↑↑ 2 Pcs Camera with 15cm Cable ↑↑ Camera with 15cm/100cm Cable ↑BrandAokinItem Weight0.845 ouncesPackage Dimensions4.72 x 3.9 x 0.71 inchesColorCamera with 15cm/100cm CableManufacturerAokinCountry of OriginChinaDate First AvailableAugust 16, 2020Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Pi 3B 3B+, Pi 4B. Used on OctoPi, Raspbian, MotionEye for monitor 3D Printer, surveillance camera, and other Pi camera projects.Ribbon flex cable: 15cm/5.90in and 100cm/39.37in white camera cable for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, camera module and display, long enough for use the camera.Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens; the high-definition video camera is capable of 2592 x 1944 pixel static images and supports video resolution 1080p@30fps, 720p@60fps and 640x480p 60/90 video recording.Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board; The camera module size: 25mm×24mm×9mm and weight only 3g, making it perfect for mobile, you can be applied to image recognition and image tracking, etc.If you have any issues for raspberry pi version 1.3 camera module, please contact us by message, we will do our best for you.Product DescriptionAokin mini camera module for the Raspberry Pi series board, which is fully compatible with the official.Specifications:Module Weight: 3gMax frame rate: 30fpsFocus Mode: fixed-focusAngle of View: 65 degreeWorking voltage: 1.7V~3.0VField of View: 2.0 x 1.33m at 2 mModule Size: 25mm × 24mm × 9mmWorking temperature: -20 °C ~ 70 °CSensor type: OmniVision OV5647 5MPMaximum Photo Resolution: 2592 x 1944 pixelSupported Video Resolution: 1080p@30fps, 720p@60fps, 480p@90fps.Interface: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.Package including:1 x 5MP Camera Module for Raspberry Pi1 x 15cm white ribbon flex cable for Raspberry Pi Model A/B/B+, Pi 2B, and Raspberry Pi 3B 3B+, Pi 4B1 x 100cm white ribbon flex cable for Raspberry Pi Model A/B/B+, Pi 2B, and Raspberry Pi 3B 3B+, Pi 4BApplication:Cellular phones, PDAs, ToysOther battery-powered productsCan be used on for all Raspberry Pi platformsReference:You can find more detailed instructions for the Raspberry Pi camera:raspberrypi.org/cameraraspberrypi.org/downloadsraspberrypi.org/documentation/usage/cameraStep 1Must make sure for your Raspberry Pi board is turned off, find the camera module port, then gently pull up on the edges of the port's plastic clip. Please refer to the picture.Step 2Insert the camera module ribbon cable correctly, then gently push the plastic clip back into place. Please refer to the picture.Step 3Find the camera module, then gently pull up on the edges of the port's plastic clip. Please refer to the picture.Step 4Insert the camera module ribbon cable correctly, then gently push the plastic clip back into place. Please refer to the picture.For Raspberry Pi Camera CableFor Raspberry Pi Camera CableFor Raspberry Pi Camera Cable SetCompatibleRaspberry Pi Zero/Zero WRaspberry Pi A/B/B+/2B/3B/3B+/4BRaspberry Pi A/B/B+/2B/3B/3B+/4B/Zero/Zero wKey FeaturesBrand : AokinItem Weight : 0.845 ouncesPackage Dimensions : 4.72 x 3.9 x 0.71 inchesColor : Camera with 15cm/100cm CableManufacturer : AokinCountry of Origin : ChinaDate First Available : August 16, 2020What's In the Box1x X630 HDMI to CSI-2 Module1x X630-A1 Board1 x FPC cable（5cm length）2 x F/F M2.5*17mm Spacers4 x M2.5*5 Screws1 x M2.5 Nut
FREENOVE Robot Dog Kit For Raspberry Pi 4 B 3 B+ A+
↑ ↑ProcessornoneBrandFREENOVEOperating SystemRaspberry Pi OSCPU ModelNoneCPU ManufacturerFreenoveConnectivity TechnologyUSBHuman Interface InputButtonsAbout this itemThis robot dog has multiple functions. (Assembly required. Raspberry Pi and Battery are NOT included.)Provides detailed assembly tutorial and complete code (Python) -> The download link can be found on the product box. (No paper tutorial.)Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+. (2B / B+ / A+ / Zero 1.3 / Zero W is also compatible but needs extra parts.) (Raspberry Pi is NOT included in this kit.)Control methods -> Controlled wirelessly by your Android phone or tablet, iPhone and computer (run Windows, macOS or Raspberry Pi OS).Needs battery -> Refer to "About_Battery.pdf" in downloaded file to buy.›Product DescriptionImportant Notes:This robot needs to be assembled and does NOT include Raspberry Pi and battery.(Refer to "About_Battery.pdf" in downloaded file to buy battery.)Overview:This is a programmable robot dog kit, which has multiple functions.Whether you want to experience the joy of robots or learn to program, this is a good choice.We provide free technical support to help you with any questions and problems.Compatible Models:* Recommended:Raspberry Pi 4B / 3B+ / 3B / 3A+* Also compatible but needs extra parts (refer to tutorial for details):Raspberry Pi 2B / B+ / A+ / Zero 1.3 / Zero W(Note: Raspberry Pi is NOT included in this kit.)Tutorial and Code:Comes with detailed tutorial and complete code (Python). (Download needed, no paper tutorial.)The download link can be found on the product box.Remote Control:You can use the following devices to control this robot:* Computer:Laptop or desktop. (Run Windows, macOS or Raspberry Pi OS.)(Refer to tutorial for details.)* Android device:Android phone or tablet. (Run Android 4.4 or later, installed Freenove App.)(Search Freenove on Google Play.)* iPhone:(Run iOS 10 or later, installed Freenove App.)(Search Freenove on App Store.)Package Includes:1 x Robot Shield for Raspberry Pi1 x Connection Board1 x Ultrasonic Module1 x Accelerometer Module1 x LED Module1 x Camera1 set Machinery Parts (9 kinds)13 x Servo Package1 x Servo Package1 set Acrylic Parts1 x Jumper Wire F/F (4Pin)1 x 10cm 3Pin LED Cable1 x 25cm 15Pin Camera Cable1 x Cross Screwdriver (3mm)1 x Cross Screwdriver (2mm)1 x Cable Tidy (80cm)1 x Red Ball1 x Calibration GraphNeeded but Not Included:2 x Battery (Refer to "About_Battery.pdf" in downloaded file to buy.)1 x Charger for battery1 x Raspberry Pi board and its necessary accessoriesKey FeaturesThis robot dog has multiple functions. (Assembly required. Raspberry Pi and Battery are NOT included.)Provides detailed assembly tutorial and complete code (Python) -> The download link can be found on the product box. (No paper tutorial.)Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+. (2B / B+ / A+ / Zero 1.3 / Zero W is also compatible but needs extra parts.) (Raspberry Pi is NOT included in this kit.)Processor : noneWhat's In the Box1 X Touchscreen monitor1 x Micro USB Cable1 x HDMI Cable1 x Bracket1 x Manual6 × Screws
ElecLab Raspberry Pi Touchscreen Monitor 7 Inch DSI
↑ ↑Item Weight1.41 poundsManufacturerElecLabCountry of OriginChinaItem model numberEL070DSITNDate First AvailableOctober 15, 2020box contentsstandScreen Size7 InchesDisplay Resolution Maximum800x480 PixelsBrandElecLabSpecial FeatureTouchscreenRefresh Rate60 HzAbout this itemThis display only supports the Raspberry Pi DSI interface, and the Raspberry Pi can be easily installed on the back of the monitor through 4 positioning holes. The display provides power to the Raspberry Pi through the power adapter board, and the two XH2.54 sockets can supply power to fans or other peripherals.DSI interface 7-inch LCD 800x480 resolution and 5-point capacitive touch screen, display brightness can be adjusted by potentiometer and software PWM, integrated audio amplifier and 2W dual channel stereo speakers and volume potentiometer.Reserve an SSD adapter PCB mounting location for running Raspbain directly from a USB3.0 SSD, or as a high-speed mass storage device as a media library for NAS or Volumio.Integrated with CH340E and DB9 male header, RS232 or RS485 function can be selected by DIP switch. The TXD/RXD signal has LED indicators to show the communication process of sending and receiving. Can be connected to PLC, stepper/servo drive, LORA module...The display is equipped with 2 damping shaft brackets, the display angle can be adjusted arbitrarily, and the brackets can also be removed to install the case. The STL file for the 3D printed case is available under eleclab-rpi/7INCH_DSI_DISPLAY, and the fan case STL file is under eleclab-rpi/rpi_fan_case.Product DescriptionProduct detailsThe audio adapter board connects the Raspberry Pi and the display to transmit audio signalsThe volume potentiometer can directly adjust the volume of the sound.The brightness potentiometer can adjust the brightness of the display backlight, or adjust it through software.The USB signal adapter board connects the Raspberry Pi and the USB serial port of the display, providing RS232/RS485 communication functionDSI FPC cable gets DSI display signal from Raspberry PiThe USB power adapter board gets 5V power from the display to power the Raspberry Pi2x2W speakers, loud and clear soundFeatures and SpecsThe 7" LCD display is an LCD display which connects to the Raspberry Pi through the DSI connector.It is capacitive touch LCD screen.It has 2x2W speaker.It has rs232/rs485 interface.It is compatible with Raspberry PI 1 model A+ B+/ PI 2 model B/PI 3 model A+ B B+/PI 4 model B nd 2B.It doesn't need install driver, and you can plug and play.The Physical resolution of LCD display is 800*480.Package Includes1 x 7 inch display1 x TypeC USB cable1 × DSI short cable1 × DSI long cable5 x pcb(audio board, micro usb power board, typeC usb power board, RPI3 usb board, RPI4 usb board)1 x XH2.54 long cable1 x touch pen4 x M2.5x5 screw4 x M2.5x10 screw1 x straight screwdriver2 x Any angle brackets can be removed to mount the enclosure.1 x user manualRPI Settings1. If use Raspberry pi 4, make sure that VC4-KMS-V3D is prohibited in config.txt#dtoverlay = VC4-KMS-V3D2.The volume is adjusted directly by Raspbain or other application software.3. Brightness can be adjusted by installing rpi-backlight, or using the following command line:N: 0~255bash -c "echo N > /sys/class/backlight/rpi_backlight/brightness"7 Inch DSI Screen7 Inch HDMI Screen7.4 Inch 1280x4005 inch DPI Screen8 Inch 1600x4808 Inch 1024x600Screen Size7 Inch7 Inch7.4 Inch5 Inch8 inch8 inchResolution800x4801024x6001280x400480x8541600x4801024x600Panel TypeTNIPSIPSIPSIPSTNTouch TypeCapacitiveCapacitiveCapacitiveCapacitiveCapacitiveCapacitiveInput SignalDSIHDMIHDMIDPIHDMIHDMIDriverNo needHDMI ConfigHDMI ConfigDPI ConfigHDMI ConfigHDMI ConfigAudio2x3W Speakers2x3W Speakers2x3W Speakers2x3W Speakers2x3W Speakers2x3W SpeakersStand/CasePlastic StandPlastic Stand3D Printed Case3D Printed Case3D Printed CaseAcrylic CaseFunctionRS232/RS485,BrightnessRS232/RS485, 4xAV Input, NGFF SSD Module Location, Minipci-e GPRS/4G Module LocationBrightnessBrightnessBrightnessBrightnessKey FeaturesItem Weight : 1.41 poundsManufacturer : ElecLabCountry of Origin : ChinaItem model number : EL070DSITNDate First Available : October 15, 2020box contents : standWhat's In the Boxstand
Hiren-s-BootCD-15-2-Rebuild-All-in-One-Bootable-CD
Hiren's Boot CD rescue disk name composed of the best and most useful tools in a compact, maintenance, troubleshooting and commissioning of the system as a Bootable CD is required by most computer users. This boot disk, different software, such as file manager, anti-virus, troubleshooting tools, system tools, disk partitioning, security software and data recovery and hard drive repair tools. When there is a problem whit your operating system This CD will come to your aid.One of the applications in this category is WebBrowserPassView any username and password which can be found in various browsers, Mozilla Firefox, Opera, Google Chrome and Internet explorer view. The security certificate is also a large collection of software applications.What's In the BoxDVD Disk
GeeekPi Raspberry Pi Mini Tower NAS Kit, ICE Cooler With PWM
↑ ↑BrandGeeekPiItem Weight13.1 ouncesPackage Dimensions5.12 x 4.96 x 3.11 inchesColorBlackManufacturerGeeekPiCountry of OriginChinaDate First AvailableJuly 18, 2022BrandGeeekPiColorBlackConnectivity TechnologyGPIOAbout this itemThis kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host.NOTE: The RGB light in Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drivePackage Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package)Product Descriptionwiki.52pi.com/index.php?title=ZP-0130-4wirewiki.52pi.com/index.php?title=ZP-0130-4wirewiki.52pi.com/index.php?title=ZP-0130-4wireFor more information: wiki.52pi.com/index.php?title=ZP-0130-4wireFor more information: wiki.52pi.com/index.php?title=ZP-0130-4wireFor more information: wiki.52pi.com/index.php?title=ZP-0130-4wireKey FeaturesBrand : GeeekPiItem Weight : 13.1 ouncesPackage Dimensions : 5.12 x 4.96 x 3.11 inchesColor : BlackManufacturer : GeeekPiCountry of Origin : ChinaDate First Available : July 18, 2022What's In the BoxPI only
