Buy Other Electrical Fittings Products online in Nigeria

Single Outside Reflector Light Fitting

This outdoor fitting helps enhances the illumination of the exteriors of structures/buildings, and also aids in beautifying the facade. The quality of its materials has also made it not just to be highly durable, but also help in protecting the light bulb to be installed in it.

Modular Surge Arrester - 2p - 350v - With Remote Transfert ||a9l40201

This Acti9 iPRD40r surge arrester protects 2P installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for high risk level in incoming panel board. It offers remote reporting of the "cartridge must be changed" message. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. It is compatible with TT and TN-S earthing system. The Uc maximum continuous operating voltage in common mode (L/PE or N/PE) is 350VAC. The Up Voltage protection level in common mode (between phase and earth) is 1.4kV. The Ue rated operational voltage is 230VAC +/- 10%. The product colour is white (RAL9003).The dimensions are (W) 36mm x (H) 85mm x (D) 69mm. The weight is 221g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25 & deg;C to 60 & deg;C. The storage temperature is -40 & deg;C to 85 & deg;C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.

Thermal Overload Relay, Tesys Deca, 12...18 A, Class 10a- LRD21

TeSys LRD thermal overload relay, 18A/690V, thermal setting range 12-18A, tripping class 10A, for protection of 3-phase motors 7.5kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D18-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

Easy9 Distribution Board - 3p - 125a -18 Ways- Straight With Fixlink|| EZ9ET18LFD

This Easy9 VTPN enclosure is a surface or flush mounted distribution board. The In rated current can be up to 125A. It is a three phase enclosure. The number of ways is 18. The cables can enter via 11 knock-outs. It is intended for installation in residential. The provided equipments are, washer, copper link, screws, removable front cover, insulated fishbone, adjustable pan assembly, provision for incomer and blanking plate. The colour of the enclosure is grey (RAL 7035). This enclosure comes with plain door, the enclosure material is powder coated steel. The IP degree of protection is IP40 closed door. The dimensions are (W) 466mm x (H) 515mm x (D) 110mm. According to IEC 62262 standard, the IK degree of protection is IK08. The operating temperature is from -5 & deg;C to +50 & deg;C. This enclosure is complies with IEC 61439-1 and 3 standards. Main Range Easy9 product name VTPN product or component type Distribution board provided equipment 1 x washer, 4 x screws, Removable front cover, Copper link, Insulated fishbone, Adjustable pan assembly, Provision for incomer, Blanking plate Complementary enclosure mounting Surface, Flush network number of phases Three phase number of ways 18 ways type of rail DIN cable entry 11 knock-outs Type of door Plain door [In] rated current 125 A enclosure material Powder coated steel width 466 mm outside: height 461 mm outside: depth 110 mm outside: colour Grey (RAL 7035) Environment Standards IEC 61439-1 IEC 61439-3 product certifications ASTA IP degree of protection IP40 conforming to IEC 60529 (closed door) IK degree of protection IK08 conforming to IEC 62262 ambient air temperature for operation -5 & hellip;50 & deg;C

LED Emergency Light

Lamp Size:359*137*82mm LED source: 24 pcs power: 8W Input voltage: 85-265V emergency time: & gt;3hours Battery:Li 3.7V2400mAh Colour Temperature: 6500k

Ac Magnetic Contactor Cu-22 Non-reversing 3 Poles, 21A, 230V, 50/60Hz

Model: CU-22 Main Colour: Black/White PRODUCT DESCRIPTION Rated Insulation Voltage (Ui) & ndash; 1000/600V Current Rating: 21A Thermal Current (ith) - 40/40A Rated Power capacities (Ie) AC1 Single Phase 220V: 20.5A, 2.2KW, 3HP NOTE: Lug Terminals are options for Contactors CU-11 to CU-80 Dimension: 5.5*7.2*9.2cm

Tesys D Contactor

TeSys D contactor, 4 poles (4NO) - Ac-1 - & lt;= 440 V 60 A - 220 V Ac 50/60 Hz Coil ||LC1DT60AM7, for non-inductive load applications up to 60A/440V AC-1. It provides a 220V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connections by EverLink BTR screw terminals and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60 & deg;C, it procures high reliability and durability. Compact (70mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh). SPECIFICATION Main Range TeSys TeSys Deca Product name TeSys D TeSys Deca product or component type Contactor device short name LC1D contactor application Resistive load utilisation category AC-1 poles description 4P power pole contact composition 4 NO [Ue] rated operational voltage Power circuit: & lt;= 690 V AC 25...400 Hz Power circuit: & lt;= 300 V DC [Ie] rated operational current 60 A (at & lt;60 & deg;C) at & lt;= 440 V AC AC-1 for power circuit control circuit type AC at 50/60 Hz [Uc] control circuit voltage 220 V AC 50/60 Hz auxiliary contact composition 1 NO + 1 NC Rated impulse withstand voltage 6 kV conforming to IEC 60947 overvoltage category III conventional free air thermal current 10 A (at 60 & deg;C) for signalling circuit 60 A (at 60 & deg;C) for power circuit Irms rated making capacity 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 800 A at 440 V for power circuit conforming to IEC 60947 rated breaking capacity 800 A at 440 V for power circuit conforming to IEC 60947 rated short-time withstand current 320 A 40 & deg;C - 10 s for power circuit 720 A 40 & deg;C - 1 s for power circuit 72 A 40 & deg;C - 10 min for power circuit 165 A 40 & deg;C - 1 min for power circuit 100 A - 1 s for signalling circuit 120 A - 500 ms for signalling circuit 140 A - 100 ms for signalling circuit associated fuse rating 10 A gG for signalling circuit conforming to IEC 60947-5-1 80 A gG at & lt;= 690 V coordination type 1 for power circuit 80 A gG at & lt;= 690 V coordination type 2 for power circuit average impedance 1.6 mOhm - Ith 60 A 50 Hz for power circuit electrical durability 1.4 Mcycles 80 A AC-1 at Ue & lt;= 440 V power dissipation per pole 5.8W AC-1 mounting support Plate, Rail operating time 4...19 ms opening 12...26 ms closing mechanical durability 6 Mcycles maximum operating rate 3600 cyc/h 60 & deg;C Complementary coil technology Without built-in suppressor module inrush power in VA 140 VA 60 Hz cos phi 0.75 (at 20 & deg;C) 160 VA 50 Hz cos phi 0.75 (at 20 & deg;C) hold-in power consumption in VA 13 VA 60 Hz cos phi 0.3 (at 20 & deg;C) 15 VA 50 Hz cos phi 0.3 (at 20 & deg;C) heat dissipation 4 & hellip;5 W at 50/60 Hz signalling circuit frequency 25...400 Hz minimum switching current 5 mA for signalling circuit minimum switching voltage 17 V for signalling circuit non-overlap time 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact insulation resistance & gt; 10 MOhm for signalling circuit Environment IP degree of protection IP20 front face conforming to IEC 60529 climatic withstand Conforming to IACS E10 conforming to IEC 60947-1 Annex Q category D protective treatment TH conforming to IEC 60068-2-30 pollution degree 3 ambient air temperature for operation -40 & hellip;60 & deg;C 60 & hellip;70 & deg;C with derating ambient air temperature for storage -60 & hellip;80 & deg;C operating altitude 0...3000 m fire resistance 850 & deg;C conforming to IEC 60695-2-1 height 122 mm width 70 mm depth 120 mm

100A Main Head White Cutout

Sharply serrated double-entry phase and neutral terminals are suitable for either aluminum or copper conductors from 2.5mm2 up to 35mm2 and socket headed terminal screws (operated by a custom designed tool) ensure effective and secure connections. Fuse clips are precision designed to ensure low contact resistance every time. Features HRC Fuse Cartridge sold separatelySupports HRC MF Fuses 60A, 80A and 100AInsulated Busbar available for connecting a second Single Pole cut-out/serviceTamper-resistant & lsquo;pin & plug & rsquo; protects unused cable entries.Fully compliant with BS 7657:2010Designed to ensure a secure connection and low contact resistance throughoutManufactured from glass reinforced polyesterClose-coupled version interfaces with industry-standard meter types to prevent theft of supplyAll phase terminal screws are held captive within the base to make installation as simple as possibleUnits may be combined to make a Triple Pole Set

60a 2-pole Knife Switch Power Changeover

2-Pole Manual Changeover Knife Switch2P60A Materials : Body: ABSKnife :Pure Copper Inner accessories : CopperColor:orange & Blue Patent productSuitable for home electric circuit for changing power source from grid to generator or other sources.

Thermal Overload Relay 24.5A-30A

Model: RHU10/30A1 Main Colour: Black/White Dimension: 4.5*7.05*7.2cm Relay Current Range (A) complying with IEC 60947-4-1 DESCRIPTION Current Setting Range 24.5-30(30)A

Portable Double Electric 13a 2-gang Switched Socket

A slim, trim profile, pleasing to the eye, clean and refined, the Vivace is a switch and socket set that perfectly complements the modern lifestyle. Inspired by the simple, elegant minimalism of the supremely influential Bauhaus movement, every piece in this robustly constructed range expresses a pleasing form following function. Unmarred by visible fastenings, the sleek clean lines of Vivace present a cool refined touch of style to almost any interior. Features* Product or component type - Switched Socket* Number of gangs - 2 gang* Device mounting - Flush* Surface type of packing - Blister* Rated current - 13A (250V AC, 50/60 Hz)* Cover frame colour - White* Local Signalling - Indicator Light Neon Amber* Connections - Brass rod terminals

Automatic Changeover Switch

120Amps Automatic Transfer Switch. Switch Over from Generator with ease. Turn Off and On your Generator without Stress. Single phase 120amps automatic changeover switch is a device that switches off a generator and change to mains current automatically without the need for you to do it manually our automatic change over switch ensures uninterrupted power switching. automatic change over from generator to main current. it reduces stress and saves energy. it switch off any kind of generator. it protect home appliances from power surge. eno dey shock!! eno dey kill !! it available in different amps and different sizes and can be customized for customer needs

Contactor Accessory, Side-mounting For Use With (CU-11 - CU-40) 1N/O + 1N/C. Auxiliary Contact Block

Model: CNA-111SR Main Colour: Black/White DESCRIPTION Auxiliary contact block. complying with IEC 60947-5-1 UL 508 CSA 22.2 AC1 Ith= 10A Ui 660V AC Dimension: 1.2*6.5*7.03cm

Self-adhesive Waterproof Tear Resistant Cable Label Sticker

Description:1.It can be printed on or handwritten.2.Organize your different groups of cables with different vivid colored labels, easy to identify the kind of labels at a glance3.They are waterproof, tear-resistant, oil-proof, flexible, and self-adhesive4.Cable label is smooth and bright, with no powder, safe and non-toxic pollution-free, suitable for use in engine rooms and other environments5.5 Sheets/Pack, 10 colors to chose from, 30 labels per sheet, in total 150 labels Specification:Sheet size: 210 x 297mm/8.27 x 11.69inchLabel size: 37 x 26mm + 47mm/ 1.46 x 1.02inch + 1.85Color: Indicate your choice of color through message otherwise we will mix the colors at random. Note:1. Please allow a slight difference due to manual measurement. Color may be slightly different due to different monitors. Thanks!2.If you need a big quantity, please feel free to contact me, I will give you the best discount, thanks! Package Included:5 X A4 sheets Cable Labels(150 pieces p-type label)

Easy9 Distribution Board - 3p - 125a - 24 Ways- Straight With Fix link| - EZ9ET24LFD

This Easy9 VTPN enclosure is a surface or flush mounted distribution board. The In rated current can be up to 125A. It is a three phase enclosure. The number of ways is 24. The cables can enter via 11 knock-outs. It is intended for installation in residential. The provided equipments are, washer, copper link, screws, removable front cover, insulated fishbone, adjustable pan assembly, provision for incomer and blanking plate. The colour of the enclosure is grey (RAL 7035). This enclosure comes with plain door, the enclosure material is powder coated steel. The IP degree of protection is IP40 closed door. The dimensions are (W) 466mm x (H) 568mm x (D) 110mm. According to IEC 62262 standard, the IK degree of protection is IK08. The operating temperature is from -5 & deg;C to +50 & deg;C. This enclosure is complies with IEC 61439-1 and 3 standards.

Abb Mccb Breaker 400 Amp 4 Pole

ABB offers Air Circuit Breakers, the best solution for restoring the service condition rapidly in case of fault, providing at the same time optimum protection of the electrical installation. From the miniature circuit-breakers to the moulded-case and air circuit-breakers of the standard and high-breaking capacity type, with the ABB range, every technical problem has been solved. A reliable and advanced reply which, thanks to the interaction of electronics, is also present today in the control and operation stages of electrical installations.

20mm Copper Earth Tape - By 25 meters

High-conductivity, annealed, soft drawn flat copper earthing tape, manufactured in accordance with BS1432-C101. Suitable for use within a variety of earthing (grounding) and lightning protection applications.All copper tapes are annealed for ultimate ductility and feature radiused edges to aid on-site installation. Available in a range of coil lengths depending upon the tape dimensions, we also offer a cutting service where tapes are sold by the metres.For applications where different metals will be in contact with each other or areas of high soil contamination, we would recommend fully tinned copper tapes. Lead-sheathed copper tape is also available for areas of high soil contamination.Copper materials are subject to fluctuation on the London Metal Exchange rate, please contact our Sales Team for up-to-date prices.

Broadlink Rm4 Mini

Broadlink Wifi Smart Home Hub RM MINI 4 IR Automation Learning Universal Remote Control Compatible with AlexaSupport 80,000+ IR(38KHz) controlled devices such as TV, Set-up Box, A/C, Personal Video Recorder, DVD, receiver and more. Supported devices library is constantly being updated by the cloud so your RM Mini4 is always compatible with newer devices. Large IR database that over 98% IR remote function. Option to program your devices features if certain cloud data is unavailable.Control IR appliances with BroadLink App anywhere anytime. Set up timers to turn on/off appliances at a specific time or customize scenes with multiple devices. Turning your basic home devices into smart devices and making life smarter and more convenient. (Note: Please download the latest Broadlink App & ndash; BroadLink. The previous app e-Control does not work with Alexa. The RM Mini3 only support 2.4 GHz Wi-Fi)Compatible with Alexa to voice control your TV, STB, Air Conditioner and Fans; Compatible with Google Home to voice control your Air Conditioner.Enable and schedule features on a daily basis and customizable for your needs.

Sibbhult Bracket - 18x18cm - White

Screws are sold separately.Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.If you are uncertain about what type of fixing devices to use, please contact your local hardware store.Product Size Width: 3 cm Depth: 18 cm Height: 18 cm Polypropylene plastic (min. 20% recycled), Reinforced polypropylene plastic (min. 20% recycled)

Contactor Accessory (CI-35), Mechanical Interlock With Side Mounting From CU-40 -- CU 80

Model: CC1-35 Main Colour: Black/White Dimension: 1.0*4.2*5.0cm DESCRIPTION Mechanical Interlock with Side Mounting from CU-40 -- CU80

Thunder Arrestor Copper

The purpose of lightning rods is often misunderstood. Many people believe that lightning rods & ldquo;attract & rdquo; lightning. It is better stated to say that lightning rods provide a low-resistance path to ground that can be used to conduct the enormous electrical currents when lightning strikes occur. Lightning Arrester also called lightning surge arrester,is used for protecting the buildings to avoid lightning strike. Thunder Arrester is used for protecting the buildings to avoid lightning strike. Lightning rod grounding plays an important part of the air termination network of a lightning protection system.We are professional lightning rod manufacturer.Building Lightning Rod,alternate named lightning protection devices,used for protecting the building when raining and lightning .The lightning rod installed on the building and transfer the electric to earthing metal to protect the building . Our SLE lightning rod comply with GB standard . Customized lightning rod available 1. Winding:There is a large protection area without winding. For example, when the winding rate lessthan 0.001%, (Apparently at such circumstances, the object protected has little opportunity to be winded.)and the protection up to 55 & deg; angle, compared to the traditional real lightning rod, controllable discharginglighting rod almost has no opportunity to be winded. 2. Scope of protection: When the protected object attacked by around 0.1%, (currently a point of orderunder the allowable value), controllable discharging lighting rod up to 66.4 & deg; angle, but traditional lightningrod is much more smaller than that. (Take the traditional lightning rod is more economical at strongintensive thunder area, while there still has opportunity that be struck by lighting). 3. Efficiency and application prospects: Controllable lightning rod is a widely used protection devicewith wide application prospects, with a high using value.

Thunder Arrestor Copper

The purpose of lightning rods is often misunderstood. Many people believe that lightning rods & ldquo;attract & rdquo; lightning. It is better stated to say that lightning rods provide a low-resistance path to ground that can be used to conduct the enormous electrical currents when lightning strikes occur. Lightning Arrester also called lightning surge arrester,is used for protecting the buildings to avoid lightning strike. Thunder Arrester is used for protecting the buildings to avoid lightning strike. Lightning rod grounding plays an important part of the air termination network of a lightning protection system.We are professional lightning rod manufacturer.Building Lightning Rod,alternate named lightning protection devices,used for protecting the building when raining and lightning .The lightning rod installed on the building and transfer the electric to earthing metal to protect the building . Our SLE lightning rod comply with GB standard . Customized lightning rod available 1. Winding:There is a large protection area without winding. For example, when the winding rate less than 0.001%, (Apparently at such circumstance, the object protected has little opportunity to be winded.) and the protection up to 55 & deg; angle, compared to the traditional real lightning rod, controllable discharging lighting rod almost has no opportunity to be winded. 2. Scope of protection: When the protected object attacked by around 0.1%, (currently a point of orderunder the allowable value), controllable discharging lighting rod up to 66.4 & deg; angle, but traditional lightningrod is much more smaller than that. (Take the traditional lightning rod is more economical at strong intensive thunder area, while there still has opportunity that be struck by lighting). 3. Efficiency and application prospects: Controllable lightning rod is a widely used protection devicewith wide application prospects, with a high using value.

Nylon Cable Zip Ties - 500pcs - 4 X 200

DescriptionIt is used in the binding links, lighting, motor, electronic toys, and other products in the fixed-line, the fixed of the mechanical equipment, the fixed of the cable line on the ship, the packaging of the bike, or the bundling of other objects, and can also be used in the bundling of agriculture, horticulture, handicrafts and so on. Package Include 500pcs Nylon cable tie/bag

Easy9 Distribution Board - 1p-8 Ways- Straight With Fixlink|| EZ9ES8L

This Easy9 enclosure is a surface or flush mounted distribution enclosure. The In rated current can be up to 100A. It is a single-phase enclosure. The number of ways is 8. The cables can enter via 6 knock-outs. It is intended for installation in residential. The provided equipements are, washer, identification lable, screws and removable front cover. The colour of the enclosure is grey (RAL 7035). This enclosure comes with plain door, the enclosure material is powder coated steel. The IP degree of protection is IP40 closed door. The dimensions are (W) 362mm x (H) 232mm x (D) 90mm. According to IEC 62262 standard, the IK degree of protection is IK08. The operating temperature is 50 & deg;C to 50 & deg;C. This enclosure complies with IEC 61439-1 and 3 standards. Main Range Easy9 product or component type Enclosure enclosure type Distribution enclosure provided equipment 1 x washer, Identification label, 4 x screws, Removable front cover Complementary enclosure mounting Surface, Flush Nb of horizontal rows 1 number of plates 3 for plain plate network number of phases Single phase number of ways 8 ways type of rail DIN cable entry 6 knock-outs Type of door Plain door [In] rated current 100 A enclosure material Powder coated steel width 362 mm outside: height 232 mm outside: depth 90 mm outside: colour Grey (RAL 7035) Environment Standards IEC 61439-1 IEC 61439-3 product certifications ASTA IP degree of protection IP40 conforming to IEC 60529 (closed door) IK degree of protection IK08 conforming to IEC 62262 ambient air temperature for operation 50 & deg;C

TMS Manual Motor Starter 1.0-1.6A -Electronical Overload Relay

Model: TMS-32S-001 Main Colour: Black/White Dimension: 4.5*9.6*8.7 cm DESCRIPTION Setting current Range: 1.0-1.6A Frame size:32 Rated Operational Voltage (Ue) - 690VAC Rated Insulation Voltage (Ui)- 1000VAC Rated Voltages: 220-240V, 380-415V, 600-690V Icu: 100 Ics: 100 Mechanical endurance(ops):100,000 Electrical Endurance (ops): 100,000 Rated impulse withstand voltage (Uimp): 6KV

Current-a Transformer Rate - 300/5a

AC Circuit, 300/5 Rated Current Ratio. The middle of the window for the bus to wear around. Protects equipment against circuit damage. Tests, controls, displays and records electrical equipment operation. Note: when S1,S2 is opened, it will have high voltage and this will be so dangerous, please note it.

7.6X300mm Self-locking Nylon Cable Tie - 100pcs - White

When you want to achieve a quick bundle up of anything, not easy to break, aging resistance and secure, then this product is highly recommended. Nylon cable tie is highly regarded for its strength and elastic stretch properties. Therefore used as a shield or cable coating, nylon braiding which allows for stronger, more flexible mechanical structure. This nylon cable tie is designed specifically to be used for continuous or extended exposure to the outdoors , weather, and UV light especially. This Nylon Cable Tie is a brand of Jordy-ele and it is made of nylon 66, (UL RECOGNIZED) UL Flammability 94V.2 material. The features includes, strong lock clear teeth, good tensile strength, easy to install, smooth edge with no bur. The applications includes, security sealing, bags sealing, pocket locking, bundling of items such as cables, pipes, metals, buckets, etc. The size for this nylon cable ties are 7.6x300mm (width x lenght). It is white in colour.

Entes Mkc-01 Phase Failure Relay

Phase failure relay for the protection of three-phase motors in the case of phase loss.Features Phase failure protectionFixed asymmetryContact output.Highlights & details Operating voltage 230 V/ACPhase failure protectionFixed asymmetry1 8A relay outputTechnical data Voltage asymmetry: 40% fixedPower supply: 3-phase, 4-conductorsDelay time: 0.2 s fixed.Mounting: DIN rail

Telemecanique Sensors Limit Switche Xck-m

Electromechanical detectionLimit switches are used in all automated installations and also in a wide variety of applications,due to the numerous advantages inherent to their technology.They transmit data to the logic processing system regarding:v presence/absence,v passing,v positioning,v end of travel.Simple to install switches, offering many advantagesb From an electrical viewpointv galvanic separation of circuits,v models suitable for low power switching, combined with good electrical durability,v very good short-circuit withstand in coordination with appropriate fuses,v total immunity to electromagnetic interference,v high rated operational voltage.b From a mechanical viewpointv N/C contacts with positive opening operation,v high resistance to the different ambient conditions encountered in industry (standard tests andspecific tests under laboratory conditions),v high repeat accuracy, up to 0.01 mm on the tripping points.

Current-a Transformer Rate - 1000/5a

AC Circuit, 1000/5 Rated Current Ratio. The middle of the window for the bus to wear around. Protects equipment against circuit damage. Tests, controls, displays and records electrical equipment operation. Note: when S1,S2 is opened, it will have high voltage and this will be so dangerous, please note it.

Battery Equalizer/balancer

48v battery balancer/equalizerwhen two or more batteries are connected in series, voltage differences begin to occur as the batteries charge and discharge. this ultimately reduces the life span of your precious battery bank by about 2-3yrsonce voltage difference of 2mv is detected, this energy transfer battery equalizer automatically begins to move current from higer to lower voltage battery until equilibrium is attained this is a must for every solar installationspecification48v1. 4 batteries in series2. 8 batteries in series/parallel

600v 45a Double Row 6 Position Screw Terminal Barrier Blocks Tb4506

Description The embedded fixing screw fixes the wires reliably and helps prevent accidental contact with the terminals. Each position will accept two lines. It can be cut to the desired length. Resistant to high temperatures and high pressure, high impact resistance. High elasticity, electrical conductivity, good insulation. Safe and reliable. Convenient to use. Durable in use. Ideal for all electrical wiring, cars, motorbikes, scooters and general household use. Apply to lamps and lanterns,household appliances,industry,electric accessory etc Brand new Contact material: Copper Insulator material: ABS Color: Black Size: 45Amps

Emergency Led Light With Down Exit

Lamp Size:360*25*200mm LED source: 8 pcs power: 3W Input voltage: 220 V emergency time: 2hours Battery:NI-CD1.2V500mAh Exit Left Sign

Black 20 X 20mm Adhesive Cable Base Zip Tie Mounts

DescriptionWhite Polyethylene Foam coated on both sides with a high-performance rubber adhesiveTime-saving, easy to use, durable3M Very strong viscosity, not easy to fall offEasy to install, it can be used for securing various sorts of things by using a cable tie Package included:100PCS 20x20mm Cable Base Mounts

4.8X300mm Self-locking Nylon Cable Tie - 100pcs - White

When you want to achieve a quick bundle up of anything, not easy to break, aging resistance and secure, then this product is highly recommended. Nylon cable tie is highly regarded for its strength and elastic stretch properties. Therefore used as a shield or cable coating, nylon braiding which allows for stronger, more flexible mechanical structure. This nylon cable tie is designed specifically to be used for continuous or extended exposure to the outdoors , weather, and UV light especially. This Nylon Cable Tie is a brand of Jordy-ele and it is made of nylon 66, (UL RECOGNIZED) UL Flammability 94V.2 material. The features includes, strong lock clear teeth, good tensile strength, easy to install, smooth edge with no bur. The applications includes, security sealing, bags sealing, pocket locking, bundling of items such as cables, pipes, metals, buckets, etc. The size for this nylon cable ties are 4.8x300mm (width x lenght). It is white in colour.

Mureva Light Led Floodlight 30W 6500k - Ip65 230v - Imt47211

Mureva lights, LED Floodlight equipped with the latest Led technology and infrared sensor to offer energy efficiency up to 100 lm/W. High light quality with a luminous flux 5000 lm, color temperature 4000 K and a long lifetime of 50000 h without getting hot. Compact design product with a beam angle of 110 degrees, rectangular shape (height 189,4 mm, width 141,4 mm and depth 26,5 mm) and a weight of 1,06 kg. With a high IP rating IP44, it is suitable to be installed in all types of weather conditions, indoor or outdoor. Easy Installation and mounting thanks to the bracket position. It can be hanged and mounted in all types of walls, or to be used on a Tripod. This LED floodlight is optimized for the most cost sensitive applications, helping to ensure highly competitive system lumen per dollar (W) performance. It addresses the stringent efficacy and reliability standards required for modern lighting applications, well suited for both commercial and residential lighting applications.

1ndoor Dc 12v Led Light-yk1224

Product DescriptionProducts use SMD chips, the design makes the installation more simple and quick, Product design to avoid the car in the process of driving the output voltage 10-13v voltage instability caused by abnormal light, wide-angle and high brightness;Lights without delay, high color purity, high light penetrability;It is made of an LED light-emitting diode with very little power consumption.Very low heat with a new generation of solid-state revolutionary light sources. Package included :1 x 48 Led SMD multipurpose Dc light

Round Pilot Light - Integral LED- 24 V Ac/dc- Screw Clamp Terminals-XA2EVB3LC

This product is part of the Easy Harmony XA2 range, an offer of & Oslash; 22mm plastic pushbuttons, switches and pilot lights. This monolithic green pilot light comes with integral LED. This single component pilot light provides clear visual feedback on the status of machines. This pilot light has a 24V AC/DC rating. This is a plastic component and weighs 0.02kg. It is an IP65 rated product and comes with CE, CCC and EAC certification conforming to GB 14048.1, IEC 60947-1, GB 14048.5 and IEC 60947-5-1 standards . It is sold in lots of 10. It is easily installed into a standard 22mm diameter panel cut-outs and connected to control circuits with screw-clamp connections. It is impact resistant, dust resistant, water resistant and vibration resistant making it suitable for operation in harsh environments.

Nylon Cable Clip -3.3u

Product Description:These U-type cable clamps are made of high-quality nylon material, which is tough, resilient, and lightweight.These cable clamps can be easily concealed for a neat appearance.These plastic cable clamps can be used as wire management clips, electronic cord organizers, throttle cable clamps, marine cable clamps, stainless steel cable clamps, or anywhere clean-looking wiring is needed.This 1000-piece R-type cable clamp assortment will help you take charge of your cord management and organize numerous cables. Package includes: 1000pcs/bag of Cable Clip

Rabalder Cable Tidy - 5 Meters - White

Keeps your cables tidy and the area around them looking neat and uncluttered. Easy to cut to any length you need. Simple to open the cable tidy by the slit in the middle and wrap around your cables.5 cable ties for securing the cable tidy are included. Key highlights Keep your space organised Unclutter cables and wires Easy to cut to any length you need Lenght: 5 meters Made from polyethylene plastic Wipe clean with a dry cloth Value for money

8W Led 2 In 1 Bulb

88% Energy saving Lasr up to 15 years 15,000 hours Brightness will be reset to full brightness if off & gt;6s warm and cool 1 bulb, 2 color settings sceneSwitch Turn off and on to switch

Solar Street Lights

ALL IN ONE SOLAR STREET LIGHTS RENEWABLE ENERGY SOLUTIONS ENVIRONMENTAL CONTROL LITHIUM ION PHOSPHATE BATTERY WARRANTY FIVE-EIGHT YEARS.

Ac Magnetic Contactor Cu-16 .non-reversing, 3 Poles, 15A, 230V, 50/60Hz

Model: CU-16 Main Colour: Black/White PRODUCT DESCRIPTION Rated Insulation Voltage (Ui) & ndash; 690/600V Current Rating: 15A Thermal Current (ith) - 25/32A Rated Power capacities (Ie) AC1 Single Phase 220V: 14A, 1.5KW, 2HP NOTE: Lug Terminals are options for Contactors CU-11 to CU-80 Dimension: 4.5*7.0*8.2cm

Current-a Transformer Rate - 100/5a

AC Circuit, 100/5 Rated Current Ratio. The middle of the window for the bus to wear around. Protects equipment against circuit damage. Tests, controls, displays and records electrical equipment operation. Note: when S1,S2 is opened, it will have high voltage and this will be so dangerous, please note it.

P. O. P Led Light Blue + White Light

LED lights do not cause heat build-up; LEDs produce 3.4 btu's/hour, compared to 85 for incandescent bulbs. Because common incandescent light bulbs get hot, they contribute to heat build-up in a room. LED lights prevent this heat build-up, thereby helping to reduce air conditioning costs in the home. Mercury-free - no mercury is used in the manufacturing of LED lights. Efficient- LED lights use less watts (1/3rd to 1/30th of Incandescent or CFL). LED light save electricity, remain cool and save money on replacement costs since LED light bulbs last so long. LED Lights will extend battery life 10 to 15 times longer.LED lights do not cause heat build-up; LEDs produce 3.4 btu's/hour, compared to 85 for incandescent bulbs. Because common incandescent light bulbs get hot, they contribute to heat build-up in a room. LED lights prevent this heat build-up, thereby helping to reduce air conditioning costs in the home. Mercury-free - no mercury is used in the manufacturing of LED lights. Efficient- LED lights use less watts (1/3rd to 1/30th of Incandescent or CFL). LED light save electricity, remain cool and save money on replacement costs since LED light bulbs last so long. LED Lights will extend battery life 10 to 15 times longer.Suited for Low Ceiling Areas to Give Glare Free LightHigh Efficiency & Lower Power ConsumptionDelivers High Brightness & Excellent IlluminationLong Life of LED & rsquo;s & Driver (over 20,000 hours)No UV and IR Radiations. Suited for Low Ceiling Areas to Give Glare Free Light High Efficiency & Lower Power ConsumptionDelivers High Brightness & Excellent IlluminationLong Life of LED & rsquo;s & Driver (over 20,000 hours)No UV and IR RadiationsLED lights do not cause heat build-up; LEDs produce 3.4 btu's/hour, compared to 85 for incandescent bulbs.

Tesys Deca Control Relay - 3 No + 2 Nc - <= 690 V - 220 V Ac Standard Coil ||CAD32M7

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 220V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60 & deg;C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

Universal Type 35mm Slotted 20cm Long Din Rail

DescriptionUsed for a variety of installation electrical appliances, such as terminal block installation guide rails, distribution box installation guide rails, etc., with a wide range of applications. Package included1 & times; 20cm Length Din Rail

Tesys Deca Thermal Overload Relays - 7...10 A - Class 10a- LRD14

TeSys LRD thermal overload relay, 10A/690V, thermal setting range 7-10A, tripping class 10A, for protection of 3-phase motors 4kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

4.8x300mm Cable Tie - 100 Pieces - Black

When you want to achieve a quick bundle up of anything, not easy to break, aging resistance and secure, then this product is highly recommended. Nylon cable tie is highly regarded for its strength and elastic stretch properties. Therefore used as a shield or cable coating, nylon braiding which allows for stronger, more flexible mechanical structure. This nylon cable tie is designed specifically to be used for continuous or extended exposure to the outdoors , weather, and UV light especially. This Nylon Cable Tie is made of nylon 66, (UL RECOGNIZED) UL Flammability 94V.2 material. The features includes, strong lock clear teeth, good tensile strength, easy to install, smooth edge with no bur. The applications includes, security sealing, bags sealing, pocket locking, bundling of items such as cables, pipes, metals, buckets, etc.

Three Phase Electrical Din Rail Energy Meter

Description:1. The traditional maximum current meter is 4 times the rated current, the product is a smart meter, overload capacityUp to 12 times the base reference current.2. This product is measured by LCD digital power, no reset button, to avoid human manipulation with the data! Package includes:1pcs Energy meter DDS576C1pcs English operation manual

Divine Knife Switch - 4p225a - 600v

Adoption of open with pull clasp type terminal, easy to use and very strong. The handle use the nylon material, using the screw connect. The contact with pure materials, point of contact is planar contact, electrical conductivity is always efficient. Floor adopts electrical fiber reinforced polyester DMC, drop resistance, pressure resistance, high temperature resistance performance. The rivet is made of stainless steel materials. Model: 4P225A Rated Voltage: 380/220V Rated Current: 160A 4P 160A 600V Frequency: 50HZ

20mm Pvc Through Box - 20 Pieces

Dignity 20mm PVC Through Box conduit accessories are the ideal system for unobtrusive cable management in domestic and commercial applications. This high impact round conduit accessories have been designed and manufactured under a strict ISO9001: 2000 certified quality management system and conforms to relevant British, harmonized European and international Standards. White 20mm high impact PVC 2 way through box.

Pure Porcelain Kit Kat - 100amp 415v

This fuse is plated with copper and Brass Terminals with a Phosphor Bronze Pressure Clips and a High Grade Vitreous Porcelain free from Iron particles.

Battery Equalizer Balancer

This is 2021 model with 4 digit display NB- It works on a 4way communication channel - Even if one battery terminal is connected, it displays the 4 battery terminals +/- 0.05mV. The actual correct battery voltages are displayed once the 4 batteries are connected or as each battery is connected This is latest 2021 advancement on all existing models. It is the only 4 digit display battery equalizer BMS. At a glance you will immediately see the battery voltages 48v battery balancer/equalizerWhen two or more batteries are connected in series or parallel, voltage differences begin to occur as the batteries charge and discharge. While some batteries may be overcharged,other will be undercharged. This causes battery sulfation and ultimately reduces the life span of your precious battery bank by about 2-3yrsOnce voltage difference of 2mv is detected, this energy transfer battery equalizer automatically begins to move current from higer to lower voltage battery until equilibrium is attainedThis is a must for every solar installationspecification48v1. 4 batteries in series2. 8 batteries in series/parallel

Automatic Digital Programmable Timer - 16A

Main Features: - LCD display, clear and concise- Use the high quality anti-interference chip- To achieve energy saving and efficient intelligent- It is widely used in streetlight, neon light, lamp, water heater, air conditioner, billboard, electric cooker, booster, sprayer, bottler, preheater, agriculture facilities, broadcasting equipment, etc.Technical Data: - Working volt: 220 - 240V AC 50 / 60Hz / 12V DC - Output control: 16A - Battery: Ni-MH button battery- Hysteresis: 2 second/day- ON / OFF operation: 16 ON / OFF- Power consumption: less than 5VA- Minimun interval: 1 minute- Memory: 90 days- Timer range: 1 minute - 168 hours- Power reserve: 3 years- Ambient temperature: -10 Deg.C - 50 Deg.C- Ambient humidity: less than 95pct - Installation: pannel / din rail / wall-mounted Product weight: 0.0630kg

Electrical Fuse Base Cutout 200a

Electrical Fuse is an important component of a circuit in residential, commercial and industrial establishments. A fuse interrupts excessive current (blows) so that infliction by overheating or fire is prevented. Wiring regulations often define a maximum fuse current rating for particular circuits. Over current protection devices are essential in electrical systems to limit threats to human life and property damage. Fuses are selected to allow passage of normal current and of excessive current only for short periods. Voltage 220 to 440VCurrent Rating 1 - 200AFeatures:Easy installationLonger service lifeLow maintenanceHighlights Electrical Porcelain Cut-Out Fuse GearFuse interrupts excessive currentEnsure the safety of the circuit and home appliances Fully insulated design removes need for direct earthing

Automatic Hand Dryer

Brimix Automatic Hand DryerColour WhiteSheet Size Queen SizeWarranty Period 6 MonthsBrand Fast - Completely drying hands in 10~15 seconds with the powerful jet air.Energy Efficient - Use 70% energy of conventional warm air hand dryer , 90% cost saving vs.paper towels.Automatic - Infrared Senstive. Heater start On /Off automaticlly based on ambient temperature (25 & deg;C critical point), encourageshealthy hygiene.Auto-Stop Function - the built-in timer will stop the unit after 40 seconds.Durable And Vandal Resistant -manufactured with one-piece 1,5 mm thick Plastic cover, bright finish, and fixed to the base by means of 2 vandal-proof lock screws and lock with special wrench.Low Sound Level, Modern Sleek Design. it is durable and comes with one (1) year warranty. Great deal, Great price! We sell Quality; A Standard of the United Arab Emirates (Dubai). @ best price online you are guaranteed on Rehmie Nigeria's largest online mall.

Telemecanique Xck-j Limit Switch

TELEMECANIQUE XCK-J LIMIT SWITCH, 380V, 10A, VDE 0660 TEIL 2 IEC 337-1, NFC 63-145 VDE 0660 Teil 2 IEC 337-1, NFC 63-145 CSA-Cof. Enc. 4 Electromechanical detectionLimit switches are used in all automated installations and also in a wide variety of applications,due to the numerous advantages inherent to their technology.They transmit data to the logic processing system regarding:v presence/absence,v passing,v positioning,v end of travel.Simple to install switches, offering many advantagesb From an electrical viewpointv galvanic separation of circuits,v models suitable for low power switching, combined with good electrical durability,v very good short-circuit withstand in coordination with appropriate fuses,v total immunity to electromagnetic interference,v high rated operational voltage.b From a mechanical viewpointv N/C contacts with positive opening operation,v high resistance to the different ambient conditions encountered in industry (standard tests andspecific tests under laboratory conditions),v high repeat accuracy, up to 0.01 mm on the tripping points.

7.6x350mm Self-locking Nylon Cable Tie - 100pcs - White

When you want to achieve a quick bundle up of anything, not easy to break, aging resistance and secure, then this product is highly recommended. Nylon cable tie is highly regarded for its strength and elastic stretch properties. Therefore used as a shield or cable coating, nylon braiding which allows for stronger, more flexible mechanical structure. This nylon cable tie is designed specifically to be used for continuous or extended exposure to the outdoors , weather, and UV light especially. This Nylon Cable Tie is made of nylon 66, (UL RECOGNIZED) UL Flammability 94V.2 material. The features includes, strong lock clear teeth, good tensile strength, easy to install, smooth edge with no bur. The applications includes, security sealing, bags sealing, pocket locking, bundling of items such as cables, pipes, metals, buckets, etc. The size for this nylon cable ties are 7.6x350mm (width x lenght). It is white in colour.

20mm Pvc U-way Box - 25 Pieces

Dignity 20mm PVC Y Way Box conduit accessories are the ideal system for unobtrusive cable management in domestic and commercial applications. This high impact round conduit accessories have been designed and manufactured under a strict ISO9001: 2000 certified quality management system and conforms to relevant British, harmonized European and international Standards. White 20mm high impact PVC 2 way through box.