Buy Songyang 60W Electrical Soldering Iron with 5-Piece Solder Tips in Nigeria
You May Also Like
Digital Hot Air Heat Gun BGA Rework Solder Station + Soldering iron + IR Infrared Pre-heater
₦ 147,510.00
₦ 149,000.00
-1%
Heat Resistant High Temperature Polyimide Adhesive Tape for Soldering Aid - 20mm x 30m
₦ 9,087.40
₦ 9,565.68
-5%
Featured Products
000RENG462801
Rehmie.com.ng
Heat Resistant Polyimide Tape For Soldering & Packaging
It has been used in applications at temperatures as low as -269 & deg;C (-452 & deg;F) and as high as 400 & deg;C (752 & deg;F). High temperature tape is the recommended choice for applications that require al polyimide film with an excellent balance of properties over a wide range of temperatures.
& bull; Ideal for wave soldering, insulating circuit boards and high temperature powder coating; & bull; Has high dielectric strength; & bull; Silicone adhesive protection without leaving a residue; & bull; Temperature up to 500 & deg;F/260 & deg;C; & bull; Conform to MIL-P-46112, TYPE I . Package contains: 1pcs*BGA High temperature tape 25mm x 33M
000RENG633041
Rehmie.com.ng
Digital Hot Air Heat Gun BGA Rework Solder Station + Soldering iron + IR Infrared Pre-heater
High-Quality SMD BGA Rework Station suitable for most board-level repairs.
Specification:
Hot air gun:
Rated voltage: AC 220V 50HZ
Maximum power consumption: 450W
Type: brushless fan, soft wind
Air flow: 120L/min (max)
Temperature range: 100 Celsius degree -500 Celsius degree
Handle assembly length: 120CM
Noise: 45db
Soldering station:
Output Voltage: AC 24V
Maximum power consumption: 50W
Temperature range: 100 Celsius degree -500 Celsius degree
Ground potential: 2mV less
Ground Impedance: 2 Ohms less
Heating element: ceramic heating element
Heater power: 50W
Preheater:
Maximum power: 605W
Fever Type: far infrared heating plate
Temperature range: 100 Celsius degree -500 Celsius degree
Dimensions: 221 & times; 251 & times; 112MM
Package includes:
1 x 863 heating units
1 x air gun handle
1 x iron handle
3 x 858 nozzle
1 x Iron Stand
Digital Hot Air Heat Gun BGA Rework Solder Station + Soldering iron + IR Infrared Pre-heater
₦ 147,510.00
₦ 149,000.00
-1%
customer
000RENG645701
Rehmie.com.ng
Soldering Iron/Heater
Power consumption720W Gun temperature range100-450oCSoldering Iron Temperature range200-450oCGun typeBrushless fanAir flow:120L/MIN Soldering Iron typeBlue handleGun heater materialFerro-Alloys Soldering Iron heater materialHakko heaterGun heater resistance74 & Omega;Soldering Iron heater resistance3.5~4.1 & Omega;
000RENG645788
Rehmie.com.ng
Thermal Cooling Paste for CPU Chip & Heatsink
Thermal Grease Paste helps your electrical and electronic appliances in thermal conductivity and heat dissipation, by ensuring that the components, and the device as a whole achieve maximum stability in their performance.
Features:
High stability & reliability
Apply to : CPU, VGA, LED, Chipset and other PC components
Packing: syringe
Easy operation
Helps effectively dissipate heat from processor to radiator
Suitable for: radiator, processor or chips
Low thermal resistance, high conductivity , high temperature resistance
Non-toxic, tasteless, not aggressive
Thermal conductivity: & gt; 1W / m-k
Thermal impedance : & lt;0.211C - in/w
Compliance with RoHS REACH PFOS requirements
Net weight: 30g
Grey thermal paste
Specifications: Material: ABSSize: 15.5 x 2.1cm(L*D)Net weight: 30gPackage Includes: 1 x Syringe Thermal Grease
000RENG645792
Rehmie.com.ng
Songyang 60W Electrical Soldering Iron with 5-Piece Solder Tips
The Electrical Soldering Iron is made of environmentally friendly materials, no pollution. It is durable, long lasting, safe and reliable.It is lightweight, heats fast and has an insulated polymer slender handle for comfort and ease while using it.
It also has an Interchangeable iron coated tip to make the soldering position ideal for electronic and electric use.
The high performance fast soldering device is Ideal for soldering small electric parts and general soldering applications around the home. Suitable for both professional and Do It Yourself application, electronics, kits and repair work.
When handled with care and procedure your soldering iron service can be significantly extended.
Working voltage: 110V. Power: 60W. Max temperature: about 450?. Soldering iron length: 19cm. Cable length: 145cm.
Note
This soldering iron does not come with a stand.
Songyang 60W Electrical Soldering Iron with 5-Piece Solder Tips
₦ 18,790.00
₦ 18,980.00
-1%
customer
000RENG658859
Rehmie.com.ng
Pair Digital Multimeter Lead Probe
A multimeter probe is an electronic measuring instrument. Featured with high sensitivity AC / DC voltage, it can be applied to measure current, resistance and voltage. This screwed multimeter probe is useful for basic faults finding and field service work. With small and exquisite design, it is suitable for use with any multimeter that has a standard connector.
Features :
Made of air-spaced coax cables, durable and practical
With rubber shrouded, it is comfortable to grip
Protective caps for probe tips
Universal multi-meter plug, convenient to use
This probe is suitable for resistor, capacitor or other SMD components
It is one of the useful tools that will brings a lot of convenience for your electronic work
Specification :
Maximum Current: Max 1000V/20A
Cable Length: Approx.90cm
Plug Insertion Depth: Approx.15mm
Head: Sharp Head
Color: Red and Black
Tip of the leads are insulated
Package Includes
1 pairs univeral probe for multimeter
000RENG658866
Rehmie.com.ng
Hot Air Desoldering Station Heater
This new and improved 2-in-1 SMD rework soldering station heats up fast and maintains a stable temperature so that you can solder and Desoldering SOIC, CHIP, QFP, PLCC, BGA, or other temperature-sensitive components uninterrupted. The smart design keeps the iron safe and functional. Rotation will stop automatically when the temperatures drop under 158 Fahrenheit and the same time intelligent error detection stops short circuits and overheating before they occur. The hot air gun starts working only when the power is on and it is placed on top of the holder to keep you safe.
Spasmodically heating, limitless air adjust, rapid heating, Suitable for soldering and de-soldering surface mounted ICs. Such as QFP, PLCC, SOP, BGA etc.
Continued automatism cooling system. Deferred air delivery after switch off upon completion of rework and automatically switch off power supply after one minute.
Specifications:Power Voltage: 220VPower Consumption: 320W (Max.)Pump: Diaphragm PumpCapacity: 24L/min (Max.)Standard Iron Tip: AT-900MHot Air Temperature: 212-896 & deg;F/100-480 & deg;CTip of Iron Temperature: 392-896 & deg;F/200-480 & deg;COuter Dimensions: 7.4x5.9x9.6 inches / 187x150x245 mmWeight: Around 4 Kilo with PackingOuter Dimensions: 187 (W) x150 (H) x245 (D) mmPackage Includes:1 Rework Station with Air Output1 Rework Tray1 Soldering Iron Holder1 Soldering Iron1 Soldering Iron Foam3 Nozzles1 Manual
000RENG663258
Rehmie.com.ng
Small Hot Glue Gun Soldering Sticks - 5 Pieces
This pack of 5 hot glue gun soldering sticks help you replenish your supply of hot glues sticks. for 20W hot glue gun
Please Note: These sticks are for the small gun type, 7mm diameter and 20cm in length.
000RENG663264
Rehmie.com.ng
Adjustable 60W Electronics DIY Soldering Iron
Great tips for electronic, hobbies, kits and repair work. Temperature regulation is very convenient, easy to use with adjustable temperature dial. A simple adjustment allows you to melt the thermal glue, floating rose and high temperature solder. Fast heating and high quality 60W soldering iron ,so you can start working instantly. It is possible to replace the tip, unscrew the screw that secures the tip
000RENG663266
Rehmie.com.ng
Solder Removal Sucker Vacuum Pump
The Soldering Pump is one of the safest and easiest ways to desolder a component. The pump which features a heat resistant plastic nozzle is made of high quality materials and can be used for fast and effective elimination of excess solder.
It is anti-static with expendable plastic tip and long-lasting aluminium housing. It is best for removing solder from PC Board through-hole solder joints.
DIIRECTIONS FOR USE
Preheat the solder to be removed until melted with a soldering iron
Bring the tip of the tool to the molten solder, press down the nozzle and engage the tool to suck up the solder.
Press the release button on the desoldering pump.
Dispose of the solder inside the pump by repeatedly pressing down and releasing the nozzle.
000RENG663269
Rehmie.com.ng
Soldering Iron with Sucker
This quality soldering iron with sucker will quickly become your favorite. It features a ceramic heating element, sleeved tip and rubber grip. It's affordable, built tough, powerful, and made for lead-free solder. You'll find it in countless maker spaces, classrooms and home workshops.
000RENG673694
Rehmie.com.ng
2 In 1 Rework Station Hot Air Gun + Solder Iron + 3 Nozzles
Power consumption720W Gun temperature range100-450oCSoldering Iron Temperature range200-450oCGun typeBrushless fanAir flow:120L/MIN Soldering Iron type
handleGun heater materialFerro-Alloys Gun heater resistance74 & Omega;Soldering Iron heater resistance3.5~4.1 & Omega;
2 In 1 Rework Station Hot Air Gun + Solder Iron + 3 Nozzles
₦ 57,600.00
₦ 60,000.00
-4%
5
2 Reviews
customer
