Kolor Kut Water finding Paste used to find and measure the presence of water in the bottom of oil, diesel, petrol, gasoline, crude oil and petroleum products. Kolor kut modified water paste can detect a water and ethanol separation in gasoline blended with ethanol. Kolor Kut Hot Selling In China Water Finding Paste For Testing Water in Oil.Store in cool, dry area in original or equivalent container in accordance with all applicable regulations. Do not expose to
extreme heat or flame. Store below 150 deg. F. Do not freeze for preservation of product Wash thoroughly after handling. Do not get in eyes. follow good hygiene and housekeeping practices. Use in ventilated areas
Measuring method of water level in tank
1. The measuring position should be the same as the height of the oil surface.
2. Measurement method
2.1 First, wipe off the water gauge and apply a thin layer of water test paste at the estimated water level. Then put the water
gauge into the tank. After the gauge touches the bottom of the tank, Keep the ruler perpendicular to the bottom of the tank and
stay for 5 to 20 seconds (depending on the performance of the test paste). Then lift the gauge and read the water level height at
the discoloration of the test paste.
2.2 When there is no water in the tank and no water in the oil, the water in the tank can not be measured.
2.3 For water cushion tank, water should be measured after receiving and dispensing oil each time. The water level of the
stationary cushion tank should be measured every three days.
0.85gram