►【High Power & Dual Temperature Mode】 SEEKONE heat gun is equipped with a powerful 2000W motor, which can raise the temperature to 600℃ in seconds. You can control the temperature to 400℃ or 600℃ by toggling the switch on the back of the handle. ( Modes I: 400℃, 250L/min; II: 600℃, 500L/min).
►【Safe Design & Comfortable Experience】 The front muzzle is wrapped with a ring of black flame retardant protective cover, which can prevent the negative impact of the high temperature at the front of the muzzle to the body under long time operation. The ring handle can prevent the splash from hurting the user's hand. The handle wrapped with TPE rubber excellent feel, not only non-slip and labor-saving, non-toxic and salf. Adoptting an anti-break rubber cable sleeve make the cable more sturdy. Built-in overload protection to prevent short circuit.
►【High Quality and More Durable】 SEEKONE hot air gun body is made of ABS engineering plastic, which is hard, impact resistant, heat resistant, scratch resistant, moisture resistant and corrosion resistant. Our heat gun adopts full copper motor, low noise and high efficiency. The use of ceramic heating elements, high heating efficiency, good stability, service life of up to 500 hours.
►【Four Nozzles Accessories】 The deflector nozzle directs a narrow heat pattern to the work surface; the two concentrator nozzles direct a concentrated heat flow to the work surface; and the reflector nozzle evenly disperses the heat flow around the entire work surface. Ideal uses for shrinking wrapping, heating PVC, electronics, cell phone repair, vinyl wrapping, floor tiles, loosening rusty bolts, and other heating or defrosting purposes.
▶【What You Get 】 1 x 2000W Heat Gun, 4 x Nozzles, 1 x User Manual, our worry-free and friendly customer service. If there are any problem with our products, please feel free to contact us, our 24-hour support team is available to help you.
Key Features
It can produce more energy.
It is more reliable than ordinary motor.
Ventilaion Slot — Our hot air gun has ventilation slots, which can remove excess heat to reduce the temperature of the hot air gun.
Fast Heating — Our hot air gun can be equipped with double wire heating wire for rapid heat collection in a short time, so that the hot air gun can quickly heat up.
2 Temperature Settings — 400 ℃ (752 ℉) / 600 ℃ (1112 ℉).
Dual airflow setting — Low: 250 l/min. High: 500 l/min.
Peel and stick car film：Because of the magnitude of the car window glass, the film has to be baked outside with a heat gun to set the shape before it can be applied.
Heat shrink：When wrapping the film with heat shrink film, first wrap the object in heat shrink film and then use a heat blower to blow hot air.
Removal of rusty screws：The rusty wire buckle is not good to take, you can use a heat gun to heat up the hot and then take it much better.
Removal of adhesion：If the object is stuck with adhesive, soften it by heating it with a heat gun, then insert a spatula into the gap and lift it up.
