Heat gun, multi-purpose hot air blower for decal stickers with high capacity Genuine HeatG.un Heat Gun 2000W
Heat gun, Decal stick torch, Headlight Shrink film with 2 heat modes 2000W capacity used for packaging shrink film, Automotive film for bending plastic pipes. industrial electric heating
features:
1. Fast heating: dual heating wire, fast heating, only takes a few seconds to heat up, constant temperature, with overload protection function.
2. Electroplated steel pipe: The part between the steel pipe and the shell is designed with separate heat shield ventilation holes. and the air supply will be uniform and strong.
3. High power: 2000W high power, pure copper motor, continuous work, even working temperature, longer life.
4. Wind speed adjustment: 2-level wind speed adjustment switch, can be adjusted according to usage needs.
5. Diverse applications: Can be used for car filming, melting, image lamination, packaging shrinkage, etc. all in one machine.
Technical specifications:
Product name: Hot air torch, heat torch
Color: black
Material: Plastic and Copper
Size: Approx. 23*18 cm/9.06*7.09 inch (Length * Width)
Save Air output: 240-420L/min
Noise: 50-60 decibels
Working temperature: 50°C~550°C
Power type: AC power
Working current: 6.3A Voltage
: 220V-240V
Input power Rating: 2000W
Package includes: 1 Pc x Hot Air Gun
Precautions for safe use
1. Connect to the power source according to the usage voltage marked on the device.
2. When using tools in high places, always hold them firmly.
3. Do not put the tool down before it has completely stopped working.
Heat gun safety precautions
1. Do not use the heat gun as a hair dryer.
2. Do not point the fan directly at people or animals.
3. Do not use near flammable objects or gases.
4. Do not block or cover the air inlet and outlet.
5. Do not touch the nozzle while using the hot air gun or after use. Hands holding the hot air gun must be dry.
6. Hot air guns can only be stored after they have cooled completely.
Maintenance and repair
1. Do not clean with turpentine, paint mixture, gasoline or similar substances.
2. When work stops Place the fan upside down on a flat work surface and wait for the fan to cool.
3. When storing the hot air duct Make sure the hot air duct is completely cool.
4. Regularly remove shoes from the cooling fan air intake. and keep the air inlet and outlet clean.
5. Check the wiring periodically. If damaged, replace immediately.
6. All maintenance will be performed by authorized service centers or other qualified service organizations. For safety
Note: genuine products have high/low temperature adjustment on the back
Switch: on/off, high/low
Temperature: 50º - 600ºC
Power: 2000W
Uses: Using heat to shrink plastic film; Bending PVC pipes; Drying damp wood; Peel off the old paint layer, shrink film to wrap fruit baskets, phone boxes, multi-function...
Use electricity: 220V 50Hz
SIZE: 27 X 27 X 10
WEIGHT: 1200G