Buy 3/4" Air Impact Wrench - Model At-261 in Nigeria

3/4" Air Impact Wrench - Model At-261

₦ 217,800.00 ₦ 220,000.00 -1%

0 No Reviews

Product SKU: RENG703981

Quantity

In Stock

Product Highlights

SQUARE DRIVE: 3/4"

CAPACITY BOLT SIZE:

100% Secure Payments

TrustPay

Pay Online Delivered T&C^*

Check your shipping location

Have one to sell? Sell on rehmie

Product Specifications
Description

DETAIL FOR THE 3/4" AIR IMPACT WRENCH AT-261

Pistol grip for comfort and easy handling
Adjustable torque. Reversible
Sheer power for tackling the toughest job easily.
Ideal for spring works. Pinon nut removal major engine teardown.

PERIODIC MAINTENANCE & INSPECTION

Keep tools properly lubricated to prevent wear & rust. Clean clutch lubricant regularly. Generallya 3/8" air wtool should 3/8" oz of lubricant for it's clutch mechanism.

When tools are not in use, clean and lubricate them, then store in a clean & dry place. Always use safety google or faceshield when operating air tools.

Never wear loose clothing that might get caught in tools and cause injuries.
While installing hoses or quick coupler directly into the tools, use a liquid pipe lubricant to prevent damages to the housing.
The tool features an air regulator (Beside the air inlet) allowing you to vary the amount of torque exerted on the nut or bolt you are working on. Setting "0" is the lowest setting and setting "9" is the highest setting and provides the biggest torque and speed.

MORE ABOUT THIS PRODUCT

Die cast aluminium body. Reversible
Adjustable torque. Rubber scuff guards on nose and back.
Built-in regular varies and power.
Ideal for spring works, Pinon nut removal and major engine teardown.
Sheer power to tackle tough jobs easily.

TECHNICAL DATA/ SPECIFICATIONS

SQUARE DRIVE: 3/4"
CAPACITY BOLT SIZE: 1"
MAX. TORQUE: 500 ft-lb (678 NM)
AVG. AIR CONSUMPTION: 12CFM (0.34 MM)
FREE SPEED: 4.500 RPM
AIR HOSE (ID)": 3/8"
WORKING TORQUE: 500 FT/LBS
MAX. PRESSURE: 90 PSI
AIR WRENCH TYPE: IMPACT
WORKING STYLE: ROTARY TYPE
DIMENSIONS (LXWXH): 390 X 300 X 120 MM
ITEM WEIGHT: 2 KG
CONDITION: NEW

SHIPPING AND DELIVERY

Packaged in a plastic casing
Item weight: 2 KG
Dimensions(mm): (390 x 300 x 120 mm)

Material: Die cast aluminium body

LOOSENING

Step 1. Attach the correct size socket to the anvil

Step 2. Set the compressor pressure regulator to 90 psi. Do not set the compressor regulator above 90 psi

Step 3. Connect the tool to the air compressor's hose . If leakage is detected, disconnect the air hose and fix it correctly before use.

Step 4. Place the socket over the nut to loosen.

Step 5. Grip the tool firmly. Press the REVERSE valve in from the area above the trigger so that the REVERSE valve protrudes out the back to the housing. Press the trigger to start the tool.

(Caution: Make sure the nut or bolt can withstand the impact wrench working torque)

TIGHTENING

The working torque of the impact wrench is 500 FT/LBS. Make sure that the nut or bolt you are using the tool to tight can withstand the rated torque.

Step 1. Tighten the nut as far as you can by hand.

Step 2. Place the socket on the nut. Press the REVERSE valve forward so it protrudes out the front of the housing. Press the trigger to start the tool.