Installation Place the Left and Right channel speakers next to the Sub-Woofer Connect the satellite speakers to the appropriate connector on the back of the sub-woofer. It should be connected to the Left & Right Speaker Input Connect the power adapter to the power input jack # 5 (Shown in Figure B) and to a standard AC electrical outlet (A Surge protector (not included) is recommended to protect your device). Power ON the Unit using the Power On/Off Switch #1 (Shown in Figure B) on the back of the sub-woofer You can now start to use the BLUETOOTH 2.1 STEREO COMPONENT SPEAKER SYSTEM
Connect using Bluetooth Technology Turn ON the unit. Press Mode Button to select Bluetooth Mode You would now hear a Beep tone indicating that it is now in Bluetooth Pairing Mode: Activate the Bluetooth function on your Bluetooth Device (Mobile Phone, Tablet etc). Please refer to manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the “SL 2.1 SPEAKER” from the list of available Bluetooth devices. If required, enter the password ‘0000’ to confirm pairing. Once paired successfully, a “beep” sound will be heard. Choose music from your Bluetooth® device and play wireless music through the speaker system.
Connect to your Computer using Wires or Play Music through AUX Jack - Turn ON the unit Connect the 3.5mm stereo cables to the output jack on your computer sound card or any Personal music player like Mobile Phones, Tablets, MP3 / MP4 Players. Turn on your Computer (Or Portable Audio Device). Open media player such as Windows Media Player®, etc. Click on PLAY to start playing your music. Adjust the volume, bass and treble per your preference. Make sure the volume on your speaker system, in your music software and the main volume control in your operating system are all at an audible
12level (if any one of these volume levels are at its lowest settings, you will not have good sound output from the speakers).Play Music through USB / SD/MMC Card Turn ON the unit. Insert USB Flash Drive or SD/MMC Card into the appropriate Slot on the front of the unit. Please ensure that songs are stored in MP3 format. Press Play and enjoy music from your USB or SD/MMC card. Long press Skip Forward to fast forward and short press Skip Forward to play next song. Long press Skip Backward to rewind and short press Skip Backward to play previous song.
Listen to the FM Radio Turn ON the unit. Press the Mode Button on the main unit to select FM Radio mode. Auto search function – Long press the Play button and it will automatically search the radio channels. After searching, short press Skip Forward / Skip Backward Button to select the channels already auto-searched. Manual search function – Long press the Skip forward / Skip Backward Button to search for the next strong station and stop on that station.
Care and maintenance Read the following recommendations before using the Bluetooth Multi Media Speaker System. Following these you will be able to enjoy the product for many years. Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being affected. Don’t use abrasive cleaning solvents to clean the unit. Do not expose the unit to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. Don’t dispose of the unit in fire as it will result in an explosion. Don’t expose the unit to contact with sharp objects as this will cause scratches and damage. Don’t let the unit fall down onto the floor. The internal circuit might get damaged. Don’t attempt to disassemble the unit as it may get damaged if you are not professional. In case the unit does not function properly, please contact the number shown on the Warranty Page for help