Buy Alc Smart Digital Breath Analyzer - Breath Alcohol Tester in Nigeria
You May Also Like
Featured Products
000RENG431546
Rehmie.com.ng
Oraquick Hiv Self-test Kit
First World Health Organization (WHO) and US Food and Drugs Administration (FDA) approved Oral Rapid Diagnostic Kit for HIV Self Testing.
Registered and Approved by NAFDAC and the Federal Ministry of Health, Nigeria.
Test is simple, easy and painless. Only oral fluids in upper and lower gum is used. Blood not needed.
Confidential and Convenient Testing in the privacy and comfort of your home or office.
Detailed Instruction on use on leaflet. You can carry out the test yourself with little or no assistance.
Test Result can be obtained in 20 minutes.
Single Use Only.
000RENG475694
Rehmie.com.ng
Alc Smart Digital Breath Analyzer - Breath Alcohol Tester
ALC Smart Digital Breath Analyzer - Breath Alcohol Tester
This breath alcohol tester is a kind of tester designed to measure the concentration of alcohol in the human body.
It is a fully functional breath alcohol tester with an internal alcohol sensor, folding breath tube, and even optional mouthpieces.
It uses advanced flat surfaced alcohol sensor which has excellent sensitivity and reproducibility.
The innovative fold-out mouthpiece ensures only your breath goes into the Breathalyzer, while ambient air, fumes, and other airborne gases are kept out.
You can quickly and easily estimate your BAC, Blood Alcohol Content, by blowing through the mouthpiece for 5 seconds.
Rapid detect results, quick response and resume through direct testing process LCD indication.
High accuracy, detection range: 0.000-0.199C / 0.00-1.99? BAC / 0.00-0.99 mg/L.
Digital LCD Display With Light Blue Backup.
000RENG579619
Rehmie.com.ng
HIV Test Strips - 10strips
Remove the test device from the foil pouch, and place it on a flat, dry surface.
Transfer the specimen by Disposable pipette:
Draw and transfer 1 drop (approximately 30μl) of whole blood (or 20μl serum or plasma)to the sample well of the test device, then add 2 drops of Assay diluent (approximately 60μl) and start the timer. As the test begins to work, you will see purple color move across the result window in the center of the test device.
Interpret test results within 10-15 minutes. Do not interpret after 20 minutes.
TheHIV 1/2 Rapid Test Device (Whole Blood/Serum/Plasma) is a rapid visual immunoassay for the qualitative presumptive detection of antibodies to HIV-1/HIV-2 in human whole blood, serum, or plasma specimens. This kit is intended to be used as an aid in the diagnosis of HIV infection.
1) Fingerstick Specimens (Whole Blood)
Clean the area to be lanced with Alcohol prep pad. Squeeze the end of the fingertip and pierce it with the sterile lancet.
Wipe away the first drop of blood with sterile gauze or cotton. Using Disposable pipette, collect blood from the puncture site.
2) [Serum or plasma] Centrifuge whole blood to get plasma or serum specimen.
3) If serum is not tested immediately, it should be refrigerated at 2-8 degrees Centigrade. For storage periods greater than three days, freezing is recommended. They should be brought to room temperature prior to use.
4) Serum containing precipitate may yield inconsistent test results. Such specimens must be clarified prior to assaying.
5) The whole blood may be used for testing immediately or may be stored at 2-8 degrees Centigrade up to three days.
Procedure For Testing
1) Let the pouched test come to room temperature(15-30°C). Remove the test device from the foil pouch, and place it on a flat, dry surface.
2) Transfer the specimen by Disposable pipette:
Draw and transfer 1 drop (approximately 30μl) of whole blood (or 20μl serum or plasma)to the sample well of the test device, then add 2 drops of Assay diluent (approximately 60μl) and start the timer.
3) As the test begins to work, you will see purple color move across the result window in the center of the test device.
4) Interpret test results within 10-15 minutes. Do not interpret after 20 minutes.
Caution: The above interpreting time is based on reading the test results at room temperature range of 15 to 30 °C. If your room temperature is significantly lower than 15 °C, then the interpreting time should be properly increased to 30 minutes.
