Buy 10 Pairs-twisted Bnc Cctv Video Balun in Nigeria
You May Also Like
Featured Products
000RENG502626
Canon
EW-73B Lens Hood
Canon EW-73B overview
The Canon EW-73B Lens Hood is designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.
000RENG554218
Rehmie.com.ng
10 Pairs-twisted Bnc Cctv Video Balun
10 Pairs in one lot, there are 20 pieces in total.
20 piece 3000FT Distance UTP Video Balun Twisted CCTV Balun Passive Transceivers BNC Cable Cat5 CCTV Adapter
aeProduct.getSubject()
Features:
This Video Balun supports 1 video channel ( BNC )
One UTP Cable to carry 1Video Signal or 1x UTP to carry 1 Video Signal with Camera Power
Adopt different signal transmission with excellent anti-jamming ability
Passive Device ( no power required )
600 Meter working distance
Power input of the Video to UPT Balun is for 1 Camera -UTP
The 1 Channel Video Balun supports CCTV Camera, DVD Video, Projector, TV Video Signal
Package includes:
10 pairs (20pcs) * CCTV Video Baluns
000RENG554222
Neewer
Speedlite Nw561
Neewer NW561 LCD Display Flash Speedlite
For Canon Nikon Panasonic Olympus Pentax Fujifilm and Sony with Mi Hot Shoe cameras,like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500 (NOT compatible with Canon 250D/1500D/2000D/4000D)
Guide No.: 38(ISO 100, 35mm); Color Temperature: 5500K
Flash mode: M/MULTI/S1/S2
Circuit design: Insulated Gate Bipolar Transistor (IGBT)
The wireless trigger: S1/S2 induction flash
Wireless Trigger Distance: Indoor 20-30 meters; Outdoor 10-15 meters
Flash Time: 1/200 - 1/20000 seconds
Recycle time: 2.9 seconds; Lighting time: 100-1500 times
Flash Control: 1/128 - 1/1 step length is 0.3EV, total 22 fine-tuning stalls.
Flash coverage: Fixed Zoom
Swinging/Tilting flash head (bounce flash)
External interface: hot shoe, PC sync port, external charging port
Power: 4 x AA size batteries (Alkaline or rechargeable Ni-MH are recommended. Batteries are not included.)
Package Contents: 1 x NW-561 Flash; 1 x Mini Stand
Additional function: PC synchronous, power saving mode, over temperature protection.
000RENG554225
Canon
EOS R Series Cameras Body Cover and Rear Lens Cap Cover
This product has two parts: Rear Lens Cover & Camera body cap.
Camera body cap is used when storing your camera body or after the lens has been removed from your camera body. It helps to keep dust from your camera mechanism, especially to reduce the dirt on CCD/CMOS.Another part-rear lens cap is used to store your lens solely after the lens is removed from your camera.This set of body cap and rear cap are made of high quality hard plastic material.To replace R-F-S cap and Lens dust cap RFSuitable for:All CAN0N RF and RF-S system Camera and Lenses, including third-party RF/RF-S mount lenses if there'll be in future:For camera: E0S R, RP, R3, R5, R5C, R6, R6 Mark II, R7, R8, R10, R50, R100, etc.For lenses:RF-S 55-210mm f/5-7.1 IS STMRF 24-50mm F4.5-6.3 IS STMRF 50mm f/1.2L USMRF 28-70mm f/2L USMRF 35mm f/1.8 Macro IS STMRF 16mm f/2.8 STMRF 24-105mm f/4L IS USM, etc.The back mount of Mount Adapter EF-EOSRPackage Contents:1x Rear Lens Cover1x Camera Body Cap
Note: It is not suitable for CAN0N E0S mount system, EF-M mirrorless system and CN-E cinema system
000RENG554296
Nikon
HB-32 Lens Hood For Select Nikon Lenses
Nikon HB-32 overview
The HB-32 Lens Hood for Select Nikon Lenses from Nikon is a petal-type bayonet mount lens hood for select Nikon wide-angle zoom lenses.
Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.
