Modulator Av-rf Av-tv Converter - Rca Ant Input To F Type Coax Output - Sb-168av Rf
Simply put it is the old TV without AV (red and white) input interface, through this converter, you can display the old TV AV signal, you can access DVD, VCD, video recorders, set-top boxes and a variety of video source equipment.This Product can Change the output Video and audio signal of DVD players, satellite receivers and other equipment to a RF signal, so let the TV which no video and audio signal input through an antenna input , also can watch the video program.Specifications:Modle : SB-168AVRF ouput: 6-12CHSound carrier: 5.0/5.5/6.0/6.5MHzAntenna input:45-1000MHzInput voltage: 220V 10%Power consumption: 1WSize: about 120 & times;110mm(4.72x4.33'')Connection method: set-top box, DVD red and white yellow connected to the AV input on the distributor, put the wired input line into the converter's Chin port, then the converter's RF output line connected to the TV's wired jack, And then re-search the TV.(Have a simple map on the back of the package)After connect, switch on your tv, search in VH range and save. If you receive a few channels, there may be several clear signals are not clear, just choose the most clear channel can be.Tip: If the image appears black and white and jitter or sound noise or no sound and images, it is your home TV system problems, rather than the product problem. Especially those who import old-fashioned TV, you need to set their own image format for the PAL D audio system, such as no PAL D standard, it can not be converted. The converter is PAL D standard, without standard conversion. Please confirm before you buy to avoid that you can not use after purchase. The Such as the set-top box itself has a sound noise, then the natural use of this converter will be noisy, then you need to buy a isolator.Note: Power supply by 220V ac , its plug is US plug.Notice- Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.- Please allow 1-3CM differs due to manual measurement.- Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Diseqc 2.0 Satellite Switch
4x1 Diseqc 2.0 Satellite Switch - 950-2400mhz The 4x1 diseqc switch is a coaxial cable connected with lnb under the coordination of synchronous pulse, which transmits the related control instructions serially by modulating the digital signal which alternates on 22khz frequency. Diseqc 2.0 , supports bi-directional diseqc full control functions select one of four satellite signals through diseqc commands supplied from satellite receiver utilize one coaxial cable to transmit control instruction and satellite signal simultaneously.
Diseqc 2.0 Satellite Switch
₦ 5,610.00
₦ 7,285.71
-23%
Motor Circuit Breaker - 3p - 1-1.6 A - Thermal Magnetic, Screw Clamp Terminals||GV2ME06
TeSys GV motor circuit breaker, 3 poles (3P), 1.6A/690V, for 3-phase motor applications 0.37-0.55kW@400V. It provides a thermal-magnetic protection with a thermal setting range 1-1.6A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by push-button guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh). SPECIFICATION Main range of product TeSys GV2 range TeSys Deca device short name GV2ME product name TeSys GV2, TeSys Deca product or component type Motor circuit breaker device application Motor protection trip unit technology Thermal-magnetic Complementary poles description 3P network type AC utilisation category AC-3 conforming to IEC 60947-4-1, Category A conforming to IEC 60947-2 network frequency 50/60 Hz conforming to IEC 60947-4-1 fixing mode 35 mm symmetrical DIN rail: clipped, Panel: screwed (with adaptor plate) operating position Any position control type Push-button [In] rated current 1.6 A thermal protection adjustment range 1A…1.6 A magnetic tripping current 22.5 A [Ue] rated operational voltage 690 V AC 50/60 Hz conforming to IEC 60947-2 [Ui] rated insulation voltage 690 V AC 50/60 Hz conforming to IEC 60947-2 [Ith] conventional free air thermal current 1.6 A conforming to IEC 60947-4-1 [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-2 power dissipation per pole 2.5 W mechanical durability 100000 cycles electrical durability 100000 cycles for AC-3 at 415 V, at 415 V maximum operating rate 25 cyc/h rated duty Continuous conforming to IEC 60947-4-1 tightening torque 1.7 N.m on screw clamp terminals height 89 mm width 45 mm depth 78.5 mm
Sb-168av Rf Modulator Av-rf Av-tv Converter - Rca Ant Input To F Type Coax Output
Sb-168av Rf Modulator Av-rf Av-tv Converter - Rca Ant Input To F Type Coax Output Simply put it is the old TV without AV (red and white) input interface, through this converter, you can display the old TV AV signal, you can access DVD, VCD, video recorders, set-top boxes and a variety of video source equipment.This Product can Change the output Video and audio signal of DVD players, satellite receivers and other equipment to a RF signal, so let the TV which no video and audio signal input through an antenna input , also can watch the video program.Specifications:Modle : SB-168AVRF ouput: 6-12CHSound carrier: 5.0/5.5/6.0/6.5MHzAntenna input:45-1000MHzInput voltage: 220V 10%Power consumption: 1WSize: about 120 & times;110mm(4.72x4.33'')Connection method: set-top box, DVD red and white yellow connected to the AV input on the distributor, put the wired input line into the converter's Chin port, then the converter's RF output line connected to the TV's wired jack, And then re-search the TV.(Have a simple map on the back of the package)After connect, switch on your tv, search in VH range and save. If you receive a few channels, there may be several clear signals are not clear, just choose the most clear channel can be.Tip: If the image appears black and white and jitter or sound noise or no sound and images, it is your home TV system problems, rather than the product problem. Especially those who import old-fashioned TV, you need to set their own image format for the PAL D audio system, such as no PAL D standard, it can not be converted. The converter is PAL D standard, without standard conversion. Please confirm before you buy to avoid that you can not use after purchase. The Such as the set-top box itself has a sound noise, then the natural use of this converter will be noisy, then you need to buy a isolator.
