Valve Manufacturer 201/304/316 Stainless Steel Internal Thread Gate Valve Z15w-16p Threaded Gate Valve Water Meter Valve
The Opening and Closing Parts of Stainless Steel Threaded Gate Valve Are Plug-Shaped Valve Clack, the Sealing Surface Is Flat Or Conical, and the Valve Clack Moves Linearly along the Center Line of the Fluid. The Movement Form of the Valve Stem Is Lift Rod (the Valve Stem Is Lifted and the Handwheel Is Not Lifted), and There Is Also Rotary Bar (the Handwheel and the Valve Stem Are Spinning Lift Together, and the Nut Is Located on the Valve Body). Corrugated Pipe Stop Valve Is Only Applicable to Full Opening and Full Closing, and Adjustment and Throttling Are Not Allowed. This Type of Valve Should Be Installed Horizontally in the Pipeline.Stainless SteelThreaded gate valve,Internal Thread Gate Valve,High Pressure Gate Valve,Corrugated Pipe Stop ValveIt Is a Forced Sealing Valve, So When the Valve Is Closed, Pressure Must Be Applied to the Valve Flap to Force the Sealing Surface Not to Leak. When the Medium Enters Valve 6 from below the Disc, the Operating Force Is Required.OvercomeThe Resistance Is the Friction Force of the Valve Stem and Packing and the Thrust Generated by the Pressure of the Medium. the Force of Closing the Valve Is Larger than That of Opening the Valve, So the Diameter of the Valve Stem Is Larger, otherwise, the Top Bend of the Valve Stem Will Fail. In Recent Years, after the Emergence of the Self-Sealing Valve, the Medium Flow Direction of the Stop Valve Changes from above the Valve Disc to the Valve Chamber. at This Time, under the Action of Medium Pressure, the Force of Closing the Valve Is Small, while the Force of Opening the Valve Is Large, the Diameter of the Valve Stem Can Be Reduced Accordingly. At the Same Time, under the Action of Medium, This Form of Valve Is Also Relatively Tight. China's Valve "Three Chemical Supply" Once Stipulated That the Flow Direction of Stop Valves Should Be from Top to Bottom.When the Internal Thread Gate Valve Is Opened, When the Opening Height of the Disc Is 25% ~ 30% of the Nominal Diameter, the Flow Has Reached the Maximum, Indicating That the Valve Has Reached the Fully Open Position. Therefore, the Fully Open Position of the Stop Valve Should Be Determined by the Stroke of the Valve Disc.Key FeaturesBrand: YueshuiValve Standard: National StandardStem Form: Swing TypeGate Form: Flat PlateFlexible Disc Or Not: Rigid GateNumber of Gates: Single DiscDrive Mode: ManualValve Function: Drain WaterAction Mode: Single ActionFunction: FastLining Material: Stainless Steel 304Sealing Material: Stainless Steel 304Sealing Method: Hard Sealing TypePressure Environment: Normal PressureTemperature Environment: Normal TemperatureFlow Direction: UnidirectionalAccessories Available: Valve BodyApplicable Industry: Water ConservancyApplicable Medium: WaterConnection Method: ThreadService Life: 10 Years
Factory Sales Wire Gate Valve Thread Connection Gate Valve Cast Iron Internal Thread Gate Valve Water Pipe Valve
...................................................................................................................................................................................................................................................................................................................................... Key FeaturesBrand: ColoValve Standard: National StandardValve Function: Cut-offSealing Method:/Temperature Environment: Normal TemperatureFlow Direction: UnidirectionalAccessories Available: Valve BodyDrive Mode: OtherApplicable Medium: Water
Flange Brass Gate Valve Multi-Specification Engineering Factory Durable Factory Direct Sales Brass Flange Gate Valve
Key FeaturesBrand: YueshuiValve Standard: National StandardStem Form: Stem Lifting Type (Rising Stem)Gate Form: Flexible DiscFlexible Disc: Flexible DiscNumber of Gates: Single DiscDrive Mode: ManualValve Function: Water Inlet, ThrottlingAction Mode: Single ActionFunction: Insulation TypeLining Material: RubberSealing Material: BrassSealing Method: Soft and Hard SealPressure Environment: Normal PressureTemperature Environment: Normal TemperatureFlow Direction: UnidirectionalAccessories Available: Gate, StemApplicable Industries: Water Conservancy, MachineryApplicable Medium: WaterConnection Method: Flange ConnectionProduct Specification: DN40 ~ 200
Cast Steel Flange Gate Valve Z41H-16C Heavy Duty High Temperature Steam Wedge Sluice Valve Heat Conduction Oil Gate Valve Manufacturer
Key FeaturesBrand: Zhongkai ValveApplicable Medium: WaterTarget: WaterPressure Environment: Normal PressureDrive Mode: ManualFlow Direction: UnidirectionalAccessories Available: Valve BodyTemperature Environment: Normal TemperatureStructure: Floating Ball ValveValve Standard: National StandardValve Function: Cut-offAction Mode: Single ActionType (Channel Location): Straight-throughEccentric Requirements: Consult Customer ServiceFunction: FastLining Material: Contact Customer ServiceSealing Material: Contact Customer ServiceSealing Method: Hard SealApplicable Industry: Water Conservancy
Threaded Gate Valve 304/316 Stainless Steel Ball Valve Manufacturers Supply Straight-through Plumbing Pipe Pneumatic Valve Gate Valve
Key FeaturesBrand: Weifang Zhongkai ValveValve Standard: National StandardStem Form: Stem Lifting Type (Rising Stem)Gate Form: Wedge GateFlexible Disc Or Not: Rigid GateNumber of Gates: Single DiscDrive Mode: ManualValve Function: AdjustmentAction Mode: Single ActionFunction: Slow Closing TypeLining Material: Copper AlloySealing Material: Stainless Steel 304Sealing Method: Hard SealPressure Environment: Normal PressureTemperature Environment: Normal TemperatureFlow Direction: UnidirectionalAccessories Available: Valve BodyApplicable Industry: Water ConservancyApplicable Medium: Water
Magnetic Anti-Theft/Encryption Soft Seal Flange Gate Valve JMZ45X-16Q Gauge Front Gate Valve Key Soft Seal Gate Valve
Key FeaturesBrand: YueshuiApplicable Medium: WaterSealing Form: Soft and Hard SealStandard: National StandardFlow Direction: UnidirectionalDrive Mode: ManualParts and Accessories: STEM, GatePurpose: Adjustment, Cut-offPressure Environment: Normal PressureOperating Temperature: Normal TemperatureSpecifications: 1.5-Inch DN40 without Key, 2-Inch DN50 without Key, 2.5-Inch Dn65 without Key, 3-Inch Dn80 without Key, 4-Inch DN100 without Key, 5-Inch Dn125 without Key, 6-Inch DN150 without Key, 8-Inch Dn200 without Key, 2-Inch 2.5-Inch 3-Inch Key
Z15X-16 Soft Seal Threaded Gate Valve Internal Thread Gate Valve Ductile Cast Iron Threaded Gate Valve
Xin Tip: the Prices of All Products in This Store Are Displayed, Excluding Tax and Freight. Additional Tax Points Are Added for Invoicing. For More Information, Please Contact Customer Service. Welcome New and Old Customers to Buy, Quantity Discount!!!!! Product Name: Soft Sealing Wire Gate ValveModel: Z15X-16Material: Ductile Iron Contact: Manager XiaoContact Number: 13702555355Guangdong Olunkai Fluid Control Technology Co., Ltd. Was Founded in 2012. It Is Located in the Hinterland of Pearl River Delta-Guangdong Foshan City, Guangdong Province. It Has a Superior Geographical Location and Convenient Transportation. It Is an Ideal Partner for Our Customers.Guangdong Olunkai Fluid Control Technology Co., Ltd. Is a Company Integrating Research and Development, Sales, Installation, Commissioning and Maintenance of Valves, Plumbing, Flanges and Pipe Fittings. Our Company's Products Include Valves, fire Protection, Flange, Pipe Fittings, Stainless Steel Press-Fittings, Groove Pipe Fittings, Sanitary Pipe Fittings, Wire Mouth Pipe Fittings, Etc.Products Are Widely Used in Petroleum, Chemical Industry, Thermal Power, Papermaking, Shipping, Metallurgy, Food, Municipal Water Conservancy Engineering, Construction Engineering, New Energy and Other Industries. Our Company Has a Modern Management System and the Spirit of Continuous Innovation. over the Years, Our Company Has Won the Unanimous Praise of the Vast Number of New and Old Customers and Related People for Its Good Quality Assurance and after-Sales Service.Guangdong Olunkai Fluid Control Technology Co., Ltd. Adheres to the Business Philosophy of "Careful Quality, Considerate Service and Customer Peace of Mind" and Continues to Offer High-quality Products and Excellent Services to Our Customers.Key FeaturesBrand: OlunkaiValve Standard: National StandardStem Form: Rising Stem Concealed Rod Is ApplicableGate Form: Flexible DiscFlexible Disc: Flexible DiscNumber of Gates: Single DiscDrive Mode: ManualValve Function: Cut-offAction Mode: SwitchFunction: For More InformationLining Material: For More InformationSealing Material: For More InformationSealing Method: Soft Sealing TypePressure Environment: Normal PressureTemperature Environment: Normal TemperatureFlow Direction: BIDIRECTIONALAccessories Available: OtherApplicable Industries: Environmental Protection, Chemical Industry, Electric Power, IndustryApplicable Medium: Water, Oil, Steam
Ductile Cast Iron Soft Seal Gate Valve Z45X-16 Concealed Rod Flange Gate Valve Elastic Seat Sealing Gate Valve DN15-600
SearchCopySearchCopyGuangdong Olunkai Fluid Control Technology Co., Ltd. Was Founded in 2012. It Is Located in the Hinterland of Pearl River Delta-Guangdong Foshan City, Guangdong Province. It Has a Superior Geographical Location and Convenient Transportation. It Is an Ideal Partner for Our Customers.Guangdong Olunkai Fluid Control Technology Co., Ltd. Is a Company Integrating Research and Development, Sales, Installation, Commissioning and Maintenance of Valves, Plumbing, Flanges and Pipe Fittings. Our Company's Products Include Valves, fire Protection, Flange, Pipe Fittings, Stainless Steel Press-Fittings, Groove Pipe Fittings, Sanitary Pipe Fittings, Wire Mouth Pipe Fittings, Etc.Products Are Widely Used in Petroleum, Chemical Industry, Thermal Power, Papermaking, Shipping, Metallurgy, Food, Municipal Water Conservancy Engineering, Construction Engineering, New Energy and Other Industries. Our Company Has a Modern Management System and the Spirit of Continuous Innovation. over the Years, Our Company Has Won the Unanimous Praise of the Vast Number of New and Old Customers and Related People for Its Good Quality Assurance and after-Sales Service.Guangdong Olunkai Fluid Control Technology Co., Ltd. Adheres to the Business Philosophy of "Careful Quality, Considerate Service and Customer Peace of Mind" and Continues to Offer High-quality Products and Excellent Services to Our Customers.Key FeaturesBrand: OlunkaiValve Standard: National StandardStem Form: Stem Lifting Type (Concealed Rod)Gate Form: Flexible DiscFlexible Disc: Flexible DiscNumber of Gates: Single DiscDrive Mode: ManualValve Function: Cut-offAction Mode: SwitchFunction: Switch TypeLining Material: RubberSealing Material: RubberSealing Method: Elastic SealingPressure Environment: 10kg/16kgTemperature Environment: Normal TemperatureFlow Direction: BIDIRECTIONALAccessories Available: HandleApplicable Industries: Various IndustriesApplicable Medium: Water
Z41X-16 Soft Seal Rising Stem Gate Valve Ductile Cast Iron Rising Stem Elastic Seat Gate Valve
Tips: The Prices of All Products in This Store Are Displayed, Excluding Tax and Freight. Additional Tax Points Are Added for Invoicing. For More Information, Please Contact Customer Service. Welcome New and Old Customers to Buy, Quantity Discount!!!!! Product Name: Soft Seal Rising Stem Gate ValveModel: Z41X-16Material: Ductile Iron Contact: Manager XiaoContact Number: 13702555355Guangdong Olunkai Fluid Control Technology Co., Ltd. Was Founded in 2012. It Is Located in the Hinterland of Pearl River Delta-Guangdong Foshan City, Guangdong Province. It Has a Superior Geographical Location and Convenient Transportation. It Is an Ideal Partner for Our Customers.Guangdong Olunkai Fluid Control Technology Co., Ltd. Is a Company Integrating Research and Development, Sales, Installation, Commissioning and Maintenance of Valves, Plumbing, Flanges and Pipe Fittings. Our Company's Products Include Valves, fire Protection, Flange, Pipe Fittings, Stainless Steel Press-Fittings, Groove Pipe Fittings, Sanitary Pipe Fittings, Wire Mouth Pipe Fittings, Etc.Products Are Widely Used in Petroleum, Chemical Industry, Thermal Power, Papermaking, Shipping, Metallurgy, Food, Municipal Water Conservancy Engineering, Construction Engineering, New Energy and Other Industries. Our Company Has a Modern Management System and the Spirit of Continuous Innovation. over the Years, Our Company Has Won the Unanimous Praise of the Vast Number of New and Old Customers and Related People for Its Good Quality Assurance and after-Sales Service.Guangdong Olunkai Fluid Control Technology Co., Ltd. Adheres to the Business Philosophy of "Careful Quality, Considerate Service and Customer Peace of Mind" and Continues to Offer High-quality Products and Excellent Services to Our Customers.Key FeaturesBrand: OlunkaiValve Standard: National StandardStem Form: Open Rod Wedge Single DiscGate Form: Flexible DiscFlexible Disc: Flexible DiscNumber of Gates: Single DiscDrive Mode: ManualValve Function: ThrottlingAction Mode: Single ActionFunction: Switch TypeLining Material: RubberSealing Material: RubberSealing Method: Soft Sealing TypePressure Environment: Normal PressureTemperature Environment: Normal TemperatureFlow Direction: BIDIRECTIONALAccessories Available: FlangeApplicable Industries: Environmental Protection, Water Supply and Drainage, Municipal Administration, Fire Protection, Water Conservancy, Environmental Water Treatment, Construction, Various IndustriesApplicable Medium: Water
Z41W-16P/304/316/Stainless Steel Flange Gate Valve Stainless Steel Tap Water Valve Marine Gate Valve 3-Inch 4
Key FeaturesBrand: YueshuiApplicable Medium: WaterSealing Form: Hard SealStandard: National StandardFlow Direction: BIDIRECTIONALDrive Mode: ManualParts and Accessories: StemPurpose: Lock, Replenish Water, Adjust, Drain Water, Regulate Pressure, Relieve Pressure, Cut off, Exhaust, Water Inlet, Overflow, Sewage Discharge, Check Back, Drain, Cut off, Drain, Flow Control, ThrottlingPressure Environment: Normal PressureOperating Temperature: Normal TemperatureSpecifications: 4-Point Stainless Steel Flange Gate Valve, 6-Point Stainless Steel Flange Gate Valve, 1-Inch Stainless Steel Flange Gate Valve, 1.2-Inch Stainless Steel Flange Gate Valve, 1.5-Inch Stainless Steel Flange Gate Valve, 2-Inch Stainless Steel Flange Gate Valve, 2.5-Inch Stainless Steel Flange Gate Valve, 3-Inch Stainless Steel Flange Gate Valve, 4-Inch Stainless Steel Flange Gate Valve, 5-Inch Stainless Steel Flange Gate Valve, 6-Inch Stainless Steel Flange Gate Valve, 8-Inch Stainless Steel Flange Gate ValveMaterial: Stainless Steel
Cast Steel Flange Gate Valve Z41H-16C Heavy Duty Steam Gate Valve Pipe Switch Rising Stem Gate Valve
Product Name:Cast Steel Flange Gate Valve Z41H-16C Model: DN15-DN200Material: Cast Steel The above Prices Are Only Reference Prices. for Actual Prices, Please Contact Customer Service Or Manager Xiao. All Prices Do Not Include Freight! Contact: Manager XiaoContact Number: 13727378017Guangdong Olunkai Fluid Control Technology Co., Ltd. Was Founded in 2012. It Is Located in the Hinterland of Pearl River Delta-Guangdong Foshan City, Guangdong Province. It Has a Superior Geographical Location and Convenient Transportation. It Is an Ideal Partner for Our Customers.Guangdong Olunkai Fluid Control Technology Co., Ltd. Is a Company Integrating Research and Development, Sales, Installation, Commissioning and Maintenance of Valves, Plumbing, Flanges and Pipe Fittings. Our Company's Products Include Valves, fire Protection, Flange, Pipe Fittings, Stainless Steel Press-Fittings, Groove Pipe Fittings, Sanitary Pipe Fittings, Wire Mouth Pipe Fittings, Etc.Products Are Widely Used in Petroleum, Chemical Industry, Thermal Power, Papermaking, Shipping, Metallurgy, Food, Municipal Water Conservancy Engineering, Construction Engineering, New Energy and Other Industries. Our Company Has a Modern Management System and the Spirit of Continuous Innovation. over the Years, Our Company Has Won the Unanimous Praise of the Vast Number of New and Old Customers and Related People for Its Good Quality Assurance and after-Sales Service.Guangdong Olunkai Fluid Control Technology Co., Ltd. Adheres to the Business Philosophy of "Careful Quality, Considerate Service and Customer Peace of Mind" and Continues to Offer High-quality Products and Excellent Services to Our Customers.Key FeaturesBrand: OlunkaiValve Standard: National StandardStem Form: Stem Lifting Type (Rising Stem)Gate Form: For More InformationFlexible Disc Or Not: For More InformationNumber of Gates: For More InformationDrive Mode: ManualValve Function: TruncationMode of Action: For More InformationFunction: Cut-off TypeLining Material: For More InformationSealing Material: For More InformationSealing Method: Hard SealPressure Environment: Normal PressureTemperature Environment: High TemperatureFlow Direction: UnidirectionalApplicable Industries: Chemical Industry, Machinery, Construction, IndustryApplicable Medium: Water, Oil, Steam
Brass gate valve internal thread
Gate valve is a rigid solid gate, the direction of the gate and the direction of the fluid vertical, can be fully open or fully closed, the body is the integral forging, very suitable for high temperature and high pressure working conditions. Gate valve fluid resistance is small, sealing surface by medium erosion and erosion is small, the standard valve ope ing and closing more effort, medium flow direction is not limited, no turbulence, no pressure reduction, simple form, short structure length, good manufacturing technology, wide range of application.Technical specification1. Nominal pressure:1.6Mpa2. Working Medium:Water.Non-corrosive liquid,saturated steam3. Working Temperature:-20℃≤t≤170℃(108D:-20℃≤t≤90℃)4. Pipe thread conform to ISO 7(GB/T7306),DN65~DN100 THREAD is RpNote: Seat material:108D for O-rings,the others PTFE
