Size (L x W x H cm) |
10x5x5 |
Weight (kg) |
0.04 |
Color |
Green |
This inner tube should not be excessively inflated without being installed to the outer tube, as this can cause irreversible damage!
Please use a manual air pump instead of a high-speed inflation device such as an air compressor or pump.
Before inflating the inner tube, turn the valve inward (toward the center of the rim). Inflate a small amount of air until the inner tube is circular; This pressure should be less than 0.5 mm.
This pressure should be less than 0.5 bar/8 psi.
When using rims without a ring fastening system in accordance with /TC 31, the tire inflation pressure should not exceed 5 bar/72 PSI.Every 3 ° (5 ° F) increase in temperature increases the tire pressure by approximately 1%.
Product name: Inner tube of ultra light road bicycle
Applicable to: road bicycle 700x1 8C/23C/25C/28C/30C/32C
(Recommended scope of application)
Valve type: French valve
Feature 1: Small size, light weight, good toughness, and high cost performance
Feature 2: High temperature resistance, cold resistance, high elasticity, and tear resistance
Feature 3: Durable and recyclable
If you inflate your tires in a cool garage (18 ° C/65 ° F) in the morning, and then drive at higher ambient temperatures (35 ° C/95 ° F), this may cause an increase in inner tube pressure (e.g., 0.5 bar/8 psi).
Especially when driving on hot black asphalt with temperatures exceeding 65 ° C (150 ° F), the tire pressure may exceed the maximum allowable value. In addition, excessive tire pressure during cycling can lead to separation of the tire from the rim, leading to a risk of injury.
If pneumatic tires are stored at temperatures of 60 ° C (140 ° F) or higher (for example, in a car in hot weather), deflate the inner tube to 1 bar/15 psi to avoid valve deformation.
Material: TPU
colour: green
Package Contents:
1 x Super Light Bicycle Inner Tube
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.