Sandtex satin is a premium quality satin emulsion for interior use on all walls and ceiling surfaces, where a washable high sheen finish is required. It is fast drying, non-yellowing interior acrylic co-polymer paint.
TYPICAL USES Suitable for interior use as a top
PRODUCT INFORMATION
- Colour White
- Finish High sheen finish
- Pack size 20 Ltrs
- Theoretical Coverage 14-16 m2/L per 1 coat
- Drying time: 2-4hrs between coat
- Hard drying Time 24 hrs
- Shelf Life 2 months
- For application use Roller
- storage 12 months.
APPLICATION Stir well before use. Apply by brush or medium roller. Always intermix packs for colour consistency. Please check for colour accuracy prior to application.
SURFACE PREPARATION
Ensure all Surfaces are free of dirt, loose particles, grease and other surface contaminants. All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied. Powdery surfaces should be primed with one coat of Sandtex Stabilising Solution. Polished or dense surfaces should be primed coat for other emulsion and screeded wall that has been stabilized by Sandtex stabilizing solution. For interior areas that are likely to suffer mould growth, use Sandtex sterilizing solution before application.
HEALTH & SAFETY PRECAUTION
Avoid inhalation, avoid skin and eye contact by using gloves, goggles, and face masks. Provide adequate ventilation. If product comes in contact with skin, wash thoroughly with plenty water and soap. If the eyes are contaminated flush with water up to 15minutes and seek medical attention