Mic & 1 Aux Inputs.
Preamplifier Output for connecting to a Booster Amplifier and for recording the program.
Instant transfer to DC power (Car Battery) if AC power fails.
Cut type Bass & Treble Controls
3 Mic & 1 Aux Input.
Cut type Tone control.
3 POWER SOURCE Amplifier: AC mains, 12V DC (Car Battery) and 12V DC Dry Cell (Two Banks of 8 & times;1.5V UM-1 cell each).
Extremely portable and ideal for use in remote places without electricity.
Battery saver switch for long battery life and red LED for low battery indication.
Ahuja UTR-30E PA Amplifier
25 WATTS
LOW WATTAGE PA MIXER AMPLIFIER
UTR-30E PA Amplifier
3 Mic & 1 Aux Input.
Cut type of Tone control.
3 POWER SOURCE Amplifier: AC mains, 12V DC (Car Battery) and 12V DC Dry Cell (Two Banks of 8 & times;1.5V UM-1 cell each).
Extremely portable and ideal for use in remote places without electricity.
Battery saver switch for long battery life and red LED for low battery indication.
f you're tracking more than one musician at a time, or if everyone in the group wants to listen to the playback, you & rsquo;re need a monitor distribution system. A distribution system allows everyone to listen in, and control the volume of his or her own headphones. The compact and flexible HA400 can power up to 4 pairs of headphones and up to 4 independent volumes, with outstanding audio quality & ndash; even at maximum volume!
You can use this super-compact stereo headphone amplifier with practically any headphones & ndash; four of them at the same time, to be exact! Let up to 4 different people in your studio listen to the main mix while recording, and each listener can determine their own preferred volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are employed for outstanding audio performance & ndash; these are the same op amps found in & ldquo;full-size & rdquo; audio equipment & ndash; plus, a dedicated 12-Volt DC adapter is included.
When a recording session calls for everyone's heads & ndash; and ears to be in the game, the HA400 is the perfect solution & ndash; and a real money-saver! Let your ears guide you by checking out the amazing HA400 at a BEHRINGER dealer near you & ndash; or get yours online today.
FEATURES
Ultra-compact headphone amplifier system for studio and stage applications
4 independent stereo high-power amplifier sections
Highest audio quality with virtually all types of headphones even at maximum volume
Phones Level control per channel
DC 12 V adapter included
Designed and engineered in China
Riworal P2 Ultra-compact Personal In-ear Monitor Amplifier
Riworal P2 Ultra-Compact Personal In-Ear Monitor AmplifierThe P2 Ultra-Compact Personal In-Ear Monitor Amplifier was designed specifically for you. A convenient hard-wired personal in-ear control center, the P2's belt pack puts monitor control right at your fingertips, plus it's powerful, lightweight and ultra-easy to use.
You can use your favorite headphones, earbuds or custom-molded professional InEar Monitors (IEMs) with the P2, thanks to the top-mounted, standard 3.5 mm (1/8") stereo output jack.
Because your monitor is crucial to your performance, P2's XLR / TRS combo input connector features a locking mechanism to prevent accidental mic cable disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that P2's XLR input accepts balanced line signals taken directly from your mixer, allowing you to control the volume of the onboard amplifier.
The P2 features an extremely high-quality level control with on/off switch for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.
FEATURES
In-ear monitor amplifier for personal monitor applications
Ultra-compact and lightweight design
High power and "drummer proof" headphones output
XLR and TRS input connector with locking mechanism
Level control with power on/off switch
Convenient belt-pack clip included
"Built-like-a-tank", impact-resistant metal chassisStereo/mono source switch (external)
Runs up to 12 hours on 2 AAA batteries (not included)
Battery control with LED indicators
Integrated current limit protects your ears and headphone
Riworal Wave Audio Bp1 Ultra-compact Personal In-ear Monitor Amplifier
Wave Audio BP-1Ultra-Compact Personal In-Ear Monitor AmplifierThe BP-1 Ultra-Compact Personal In-Ear Monitor Amplifier was designed specifically for you. A convenient hard-wired personal in-ear control center, the BP-1's belt pack puts monitor control right at your fingertips, plus it's powerful, lightweight and ultra-easy to use.
You can use your favorite headphones, earbuds or custom-molded professional InEar Monitors (IEMs) with the BP-1, thanks to the top-mounted, standard 3.5 mm (1/8") stereo output jack.
Because your monitor is crucial to your performance, BP-1's XLR / TRS combo input connector features a locking mechanism to prevent accidental mic cable disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that BP-1's XLR input accepts balanced line signals taken directly from your mixer, allowing you to control the volume of the onboard amplifier.
The BP-1 features an extremely high-quality level control with on/off switch for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.
FEATURES
In-ear monitor amplifier for personal monitor applications
Ultra-compact and lightweight design
High power and "drummer proof" headphones output
XLR and TRS input connector with locking mechanism
Level control with power on/off switch
Convenient belt-pack clip included
"Built-like-a-tank", impact-resistant metal chassisStereo/mono source switch (external)
Runs up to 12 hours on 2 AAA batteries (not included)
Battery control with LED indicators
Integrated current limit protects your ears and headphone
Riworal Wave Audio Ultra-compact Personal In-ear Monitor Amplifier Bp-1
Wave Audio BP-1Ultra-Compact Personal In-Ear Monitor AmplifierThe BP-1 Ultra-Compact Personal In-Ear Monitor Amplifier was designed specifically for you. A convenient hard-wired personal in-ear control center, the BP-1's belt pack puts monitor control right at your fingertips, plus it's powerful, lightweight and ultra-easy to use.
You can use your favorite headphones, earbuds or custom-molded professional InEar Monitors (IEMs) with the BP-1, thanks to the top-mounted, standard 3.5 mm (1/8") stereo output jack.
Because your monitor is crucial to your performance, BP-1's XLR / TRS combo input connector features a locking mechanism to prevent accidental mic cable disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that BP-1's XLR input accepts balanced line signals taken directly from your mixer, allowing you to control the volume of the onboard amplifier.
The BP-1 features an extremely high-quality level control with on/off switch for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.
FEATURES
In-ear monitor amplifier for personal monitor applications
Ultra-compact and lightweight design
High power and "drummer proof" headphones output
XLR and TRS input connector with locking mechanism
Level control with power on/off switch
Convenient belt-pack clip included
"Built-like-a-tank", impact-resistant metal chassisStereo/mono source switch (external)
Runs up to 12 hours on 2 AAA batteries (not included)
Battery control with LED indicators
Integrated current limit protects your ears and headphone
Riworal P2 Ultra-Compact Personal In-Ear Monitor AmplifierThe P2 Ultra-Compact Personal In-Ear Monitor Amplifier was designed specifically for you. A convenient hard-wired personal in-ear control center, the P2's belt pack puts monitor control right at your fingertips, plus it's powerful, lightweight and ultra-easy to use.
You can use your favorite headphones, earbuds or custom-molded professional InEar Monitors (IEMs) with the P2, thanks to the top-mounted, standard 3.5 mm (1/8") stereo output jack.
Because your monitor is crucial to your performance, P2's XLR / TRS combo input connector features a locking mechanism to prevent accidental mic cable disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that P2's XLR input accepts balanced line signals taken directly from your mixer, allowing you to control the volume of the onboard amplifier.
The P2 features an extremely high-quality level control with on/off switch for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.
FEATURES
In-ear monitor amplifier for personal monitor applications
Ultra-compact and lightweight design
High power and "drummer proof" headphones output
XLR and TRS input connector with locking mechanism
Level control with power on/off switch
Convenient belt-pack clip included
"Built-like-a-tank", impact-resistant metal chassisStereo/mono source switch (external)
Runs up to 12 hours on 2 AAA batteries (not included)
Battery control with LED indicators
Integrated current limit protects your ears and headphone
Riworal P2 Power Play Personal In Ear Monitor Unit
Riworal P2 Ultra-Compact Personal In-Ear Monitor AmplifierThe P2 Ultra-Compact Personal In-Ear Monitor Amplifier was designed specifically for you. A convenient hard-wired personal in-ear control center, the P2's belt pack puts monitor control right at your fingertips, plus it's powerful, lightweight and ultra-easy to use.
You can use your favorite headphones, earbuds or custom-molded professional InEar Monitors (IEMs) with the P2, thanks to the top-mounted, standard 3.5 mm (1/8") stereo output jack.
Because your monitor is crucial to your performance, P2's XLR / TRS combo input connector features a locking mechanism to prevent accidental mic cable disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that P2's XLR input accepts balanced line signals taken directly from your mixer, allowing you to control the volume of the onboard amplifier.
The P2 features an extremely high-quality level control with on/off switch for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.
FEATURES
In-ear monitor amplifier for personal monitor applications
Ultra-compact and lightweight design
High power and "drummer proof" headphones output
XLR and TRS input connector with locking mechanism
Level control with power on/off switch
Convenient belt-pack clip included
"Built-like-a-tank", impact-resistant metal chassisStereo/mono source switch (external)
Runs up to 12 hours on 2 AAA batteries (not included)
Battery control with LED indicators
Integrated current limit protects your ears and headphone
Mic & 1 Aux Inputs.Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.Instant transfer to DC power (Car Battery) if AC power fails.Cut type Bass & Treble Controls.
This Amplifier is mainly used to power Horn Speakers,Column Speaker & Ceiling/Wall Speakers ( NOT BE USED TO POWER NORMAL LOUDSPEAKERS!!!!!!!!! )3 Mic & 1 Aux Input.Cut type Tone control.3 POWER SOURCE Amplifier: AC mains, 12V DC (Car Battery) and 12V DC Dry Cell (Two Banks of 8 & radic; & Eacute; & sbquo; & Auml; & icirc;1.5V UM-1 cell each).Extremely portable and ideal for use in remote places without electricity like bus/portable evangelism and porduct awarenessBattery saver switch for long battery life and red LED for low battery indication.UTR-30E is a PA amplifier with an inbuilt Amplifeir, making it a versatile multi-application music center. This, combined with 3 microphone inputs, 1 Aux input, and provision for multiple speaker connections makes this ideally suitable for a variety of music programme and public applications. Extremely portable and ideal for use in remote places without electricity.
Nux Gp-1 Guitar Plug Headphone Amp With Free Battery
Material:plastic+electric component;Size:10x8.8x2.3cm/3.93x3.46x0.9inch
Portable size, easy to use
Plug it in your guitar and enjoy the classic British rock sound now
Classic British Distortion
AUX In Jack makes it easy to practice along with your audio player
Nux GP1
The Nux GP1 is a portable guitar plug-in amplifier that you are looking for.You can play your electric guitar anytime, anywhere. You can adjust the gain and tone level according to your choice. The built-in aux input allows you to connect any media device and play along to songs or backing tracks. You can minimize the loud playing sessions to a self-intuitive interaction and output through headphones without disturbing your neighbourhood
This Amplifier is mainly used to power Horn Speakers,Column Speaker & Ceiling/Wall Speakers ( NOT BE USED TO POWER NORMAL LOUDSPEAKERS!!!!!!!!! )
3 Mic & 1 Aux Input.Cut type Tone control.3 POWER SOURCE Amplifier: AC mains, 12V DC (Car Battery) and 12V DC Dry Cell (Two Banks of 8 & radic; & Eacute; & sbquo; & Auml; & icirc;1.5V UM-1 cell each).Extremely portable and ideal for use in remote places without electricity like bus/portable evangelism and porduct awarenessBattery saver switch for long battery life and red LED for low battery indication.UTR-30E is a PA amplifier with an inbuilt Amplifeir, making it a versatile multi-application music center. This, combined with 3 microphone inputs, 1 Aux input, and provision for multiple speaker connections makes this ideally suitable for a variety of music programme and public applications. Extremely portable and ideal for use in remote places without electricity
