Type: Hand Foot File Origin: CN(Origin) Size: 10.5*6.6*5.4CM Item Type: Foot Care Tool Power Source: Electric Number of Pieces: Combo Model Number: Foot Grinder Material: ABS Color: silver grey Net weight: 133g Battery capacity: 500MAh Charging time: 1.5 hours Gear: 2 gears Rated voltage: 3.7V Rated power: 2.5W Charging current: 2A Charging voltage: DC 5.0V Function 1: Remove exfoliate Function 2: Remove calluses
Rechargeable Electric Foot Grinder Pedicure Tools Profession Foot Callus Dead Hard Skin Remover Esfoliante Feet Skin Care Tool
Specific Parameters:
Product Name: Foot Grinder
Product size: 10.5*6.6*5.4CM
Color: silver grey
Net weight: 133g
Battery capacity: 500MAh
Material: Environmentally friendly ABS
Charging time: 1.5 hours
Gear: 2 gears
Rated voltage: 3.7V
Rated power: 2.5W
Charging current: 2A
Charging voltage: DC 5.0V
Origin: China
Function:
Remove exfoliate, Remove calluses
Product Characteristics:
•Built-in 1200mAh polymer lithium-io n battery;
•With self-cleaning function, reduce the dropping of small debris (powder can be inhaled partially);
• One key switch, with working indicator (charging indicator), speed can be switched;
Universal Micro USB charging port, 5V DC
•charging voltage, most mobile phone chargers are suitable;
•Removable multi-grinding head configuration, according to particular use, choosing coarse
•sand, fine sand grinding head;
Wireless use, free of space restrictions, available globally;
Instructions for Replacing Grinding Heads:
1.Make the product shut down;
2.Place the clip in place according to following picture.
3. Press the fin ger on both sides of the clip and pull it up at the same time.
4. Install the reversed grinding head for replacement, when you hear the click sound and check in stallation whether in place or not.
Using Steps:
1.Turn on: Hold down the power on for 2 seconds in shutdown or charging state, then working indicator will show green, and the grinding head will start to retate at high speed.
2.Speed regulation: In startup state, the speed of grinding head can be changed between high speed (green working indicator) and super high speed (red working indicator).
3.Shutdow n: Press the power on for 2 seco nds in the boot state, the working indicator lights go out, the grinding head stops running, and the product enters the shutdown state (if charged, it enters the charging state):
Tips:
1. Fully soak your feet to soften the cutin
Soak your feet in warm water for about 10 minutes. If the calluses are thick, use white vinegar, 2-3 tablespoons + hot water to soak your feet, and keep your feet dry before using.
2. Exfoliation should not be done too frequently
Use 1-2 times a week, not too often. When using it, it is not recommended to polish the dead skin and calluses all at once.
3. Please fully charge the battery before using it for the first time
The product will be tested before the factory, and the power is only about 40%. If you feel that the power is insufficient, you need to charge it for about 4 hours for the first time.
What's In the Box
1set