[Overview]
This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/d storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4 . The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
The built-in LED light indicates the reading or writing status - no more guework again.
Note:
Raspberry pi , 2.5" SATA SSDs/HDDs , power adapter are all not included
Due to installation restrictions, please pay attention to the thickne of the hard drive
As with all SSDs, new media must be formatted before use
Older SSD drives with le efficient flash media may not perform as well as newer drives
[Packing List]
1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)
1 x Carrier Board (To mount raspberry pi on X883)
1 x USB 3-D Connector
1 x 2-Pin Power Connection Wire
6 x Spacer F/F M2.5 x 14mm
2 x Spacer M/F M2.5 x 14+5mm
12 x Screw M2.5 x5mm
4 x Screw M3 x 6mm
[Power Supply Requirement]
Power supply: 5Vdc +/-5% , ≥4A
Ports & Connectors: DC jack - 5.5x2.5mm
Pls use high quality power adapter, or the HDD/SSD may cannot be recognized.
[Features]
Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield
Supports dual 2.5 SATA HDDs/SSDs working at the same time
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
Function to power the RPI via XH2.54 only needing a single power supply
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
LED blue indicator indicates each drive status
Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
About shippingShipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).
Special Announcement:Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .
Your 100% satisfaction is very ant to usIf the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.
Key Features
ROM Capacity:None
Model Number:X883
Demo Board Type:ARM
Origin:Mainland China
Certification:NONE
What's In the Box
1X Raspberry Pi 4 Dual 2.5" SATA HDD/SSD Shield X883 for Raspberry Pi 4 Model B 8GB/4GB/2GB