Widely used in farmland , orchards , gardens , vegetable base rule controlling pests , water pumping , spray irrigation , etc. , can also be used in public places , such as cleaning and garbage site disinfection spray medicine .
The 7.5hp power sprayer is a type of spraying machine used to apply pesticides and foliar fertilizers to the plants. This equipment can be used to spray pesticides and foliar fertilizers to the surfaces of plants.
The following are the characteristics of the 7.5hp power sprayer:
The body of the 7.5hp is mainly metal and a bit of plastic.
The engine is petrol driven and air cooled.
The output of the power sprayer is 15-25 litres per minute.
The power sprayer is powered by petrol
The 7.5hp power sprayer has a spraying radius of 10 metres.
The rating of the engine of this product is 3.1 kw.
Specification:
7.5hp Power Sprayer
Output: 15-25 Litres Per Hour
Rated: 800-1000r/min
Spraying Pressure: 2.0-3.5 Mpa
Range: 10 Metres
Tank Capacity: 160 Litres
Engine Power: 3.1 kw
Engine Speed (r/min): 3600
Fuel: Petrol
Net Weight : 15kg
Size dimension: 74 x 43 x 67 cm
The following steps should be taken in order to use the 7.5hp power sprayer:
Assemble the parts and components of the power sprayer.
Start the engine of the power sprayer by pulling the starter coil.
Hold the spray gun and spray the plants.
The spray gun should be pointed towards the direction of the plants.
Turn off the water before starting the motor switch , loosen the screw regulator , the regulator handle is pulled to the top
The starter motor drive unit to maintain an appropriate rotational speed , the pressure in the end and handle end of the regulator to adjust the pressure regulator to keep the wheel in between 1.0-3.0MPa , the switch opens the water spray began to work properly ;