This is hand-held tester it tests both the battery and charging systems with accuracy.
The 12-Volt battery is one of the most important components of any car. It does everything from start the car to power the audio system. When it works, everything runs smoothly, and when it does not, everything suffers. Worst of all, it can be difficult to tell exactly where the problem lies. A 12-Volt battery tester is a great tool to not only determine whether the problem stems from the battery but also to pinpoint the actual problem.
This battery testers can tell users the difference between a dead battery and a discharged battery, so they know when to replace it and when to buy a charger.
Battery load tester is used to check the condition of battery whether good or bad,to test if charging system of automobiles is working to rated capacity. It is also use to test if an Inverter battery is good or bad
It suitable for 12v batteries of 10AH-200AH
It is also suitable to measure battery voltage
Konnwei Kw208 Car Battery Tester 12v 100 To 2000cca Cranking Charging Circut Tester
Name: KONNWEI KW208 Auto Battery Analyzer For All 12V batteries
KW208 is able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status.This professional automotive battery tester provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.Beginner or expert, this car battery diagnostic tester can be used with a wide selection of 12V 100-2000 CCA regular flooded batteries, AGM flat plate, AGM spiral, as well as GEL batteries.
Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (m & Omega;) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
KW208 battery tester key functions & features:
1.System voltage: 12 Volts
2.Test Result: Good, Recharge or Replace
3.Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Internal resistance value (m & Omega;)
5.Life in percentage (%)
6.Cranking system
7.Charging system
8.Voltage test in waveform
9.Battery test, cranking test, charging test and other additional functions.
Package includes:
1*KONNWEI KW208 Auto Diagnostic Scanner
1*User & rsquo;s Manual
DUOYI DY2015
12V Car Battery System Tester Capacity Maximum Electronic load Battery Cranking Charge Test Digital Diagnostic Tools
DY2015 series storage battery testers are used for activated style leadacid storage battery
Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection. Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing
CONTENT IN PACK; 1x Duoyi Battery Tester
1x Storage battery tester
1x Rubber protect sleeve
1x User manual (in English)
1x Quick guide
Storage battery tester is used for activated style lead-acid storage battery, along with checking battery life time and the following conditions of the battery, starting up, charging, and electrical loading
2. With great design, easy operation, precise reading, complete functions, this tester supply the readings by a large LCD and hints by sound and light when testing.
3. Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data
4. Storage battery tester strengthens input protection inside , in order to prevent such situations as polar reversal connection , over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.
5. Anti-slip rubber sleeve provide a safe operate condition
6. Storage battery tester fit for all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery. It is available to vehicle of 12V storage battery. The working voltage of tester is DC 9V to 35V. Do please do not check the series connection battery with the tester.
7. Standard of optional storage battery: CCA: 100-1700; IEC: 100-1000; EN:100-1700 DIN:100-1000; JIS: need to compare CCA with a table(the table is included in user manual). Generally,battery standard was marked on battery body. In case there is no mark,please refer to vehicle exhaust, more details in "quick start guide"
12v Car Battery Tester - Automotive Battery Load Tester
Type: Vehicle Battery Testerbattery tester: 12Vworking voltage: DC 9v to 18vCCA: 100-1700DIN:100-1000EN:100-1700IEC:100-1000JlS: need to compare CCA with the tableengine star-up load test: yescharging system test: yesdisplay battery internal resistance: yesdisplay ohmsdisplay battery voltage: display voltsdisplay battery condition: display symbolreverse polarity protection: yesdetects and displays bad cell: yesloose lead detection: yesinternal unit conversion EN,EIC,DIN: yesoverload protection of input voltage: yesLCD: yescable length: 850mmPacking list:1x Tester
Product description
Product Feature:
Car Battery Load Tester 6V 12V 100A 120A 200Ah
1) Ideal for Cars, Vans, RVs and farm vehicles so on.
2) Suitable for 6V-12V lead acid batteries.
3) Compact and portable ,ideal for garages and fleet users.
4) Strong yet lightweight steel construction with intergrated handle and clamp holders.
5) Heavy duty insulated clamps. 6) Easy and safe to use, no sparking.
Battery analysis Load test,should first side open-circuit voltage of the battery, such as voltage acuity test, can be12. 5V,
such as voltage & lt; 12. SV battery to test
ITEM DESCRIPTION
Portable 12v battery meter alternator tester
measured the remaining charge of your 12v battery or check the output voltage of your alternator tester.
Also it helps find dead or weak battery or alternator using the color-coded black gator clip wire with the red test probe.
with the vehicle running, it can tell you the amount of charge your alternator is putting out.
This battery meter is compact and easy to store device.
This is 12v battery meter alternator tester. It measure the remaining charge of your 12v battery or check the output voltage of your alternator tester. Also it helps find dead or weak battery or alternator using the color-coded black gator clip wire with the red test probe. with the vehicle running, it can tell you the amount of charge your alternator is putting out. This battery meter is compact and easy to store device. This convenience handheld device features an easy-to-read LED indicator and easily fits inside your boat, car, RV, and etc. Feature as: With vehicle running on. - High 14v and ablve. - Normal 13.5v. - Low 13v and below. With vehicle running off. - Good 12.5v and above. - Fair 12v. - Poor 5v and below. - Check the output voltage of your alternator. - Easy to read LED indicator. Item: PM151004.
ITEM DESCRIPTION
Universal Battery Tester
Dual probe voltage checker, Series of LED light to indicate range of voltage. Current burden & lt;30mA, Test time= 30sec.; Freq. range DC-100Hz. Display Volts: 6,12, 24, 50, 120, 220, 400 AC/DC
ITEM DESCRIPTION
Battery Tester 12V Battery Tester Automobile Battery Analyzer Check Alternator Battery Tester Checker Battery Charging Fault Tester for Car for Vehicle and Heavy Duty TruckSmall and convenient, sensitive, fast response, simple and convenient operation. BM310 can quickly detect the car battery and charging level, and has the corresponding LED indicator to display. It is suitable for 12V batteries on cars, motorcycles, golf carts and household cars (except 24V batteries for buses and trucks). It is easy to operate, easy to use and safe. There is a built-in safety chip to ensure the stable operation of the product, high temperature and low-temperature resistance.LED Color: red, yellow and greenHow to Use:*1. Clamp the red and black test clip of the tester on the battery, connect the positive pole with red and the negative pole with black, and the corresponding LED display light of the tester will indicate. Note: do not operate for a long time!The LED indicator:1) 0-4.5V: the product cannot be started, please replace the battery.?2) 4.5-11.4V: the "OK" light flashes, and other lights are not on. The higher the voltage is, the faster the internal flashing frequency is. When it reaches 11.4V, the "OK" light is always on.3) 11.5-11.9V: "low" light flashes and "OK" light is on. The higher the voltage, the faster the internal flashing frequency. When it reaches 11.9V, the "low" light is always on and other lights are off.4) 12-12.5V: the "middle" lamp flashes, and the "low" lamp is always on. The higher the voltage is, the faster the flashing frequency is. When it reaches 12.5V, the "middle" lamp is always on, and other lamps are not on.5) 12.6-13.4V: the "full" lamp flashes and the "middle" lamp is always on. The higher the voltage is, the faster the flashing frequency is. When it reaches 13.4V, the "full" lamp is always on and other lamps are off.
Quantity 1 Piece
The 12V car battery charger adopts high and low frequency pulse repair technology, which can not only charge the car battery, but also activate and repair the slightly damage-d car battery.
Features:1. LCD Display: The LCD display can clearly display the battery charging status and battery status, charge voltage, charge current, temperature, summer mode, winter mode, etc.2. Shell Material: The battery charger adopts flame-retardant plastic shell, which is fireproof, anti-electric shock, corrosion-resistant and durable.3. Pulse Repair Function: With powerful pulse repair technology, it can repair slightly damage-d batteries, activate batteries and prolong battery life. ( It can not activate a dead battery or repair a battery which is damage-d seriously; it also can not repair a battery back to 100% new. )4. Plug and Play: No complicated steps, just plug it in to charge the battery. Can be used as battery charger, battery maintainer.5. Wide Application: It can charge 12V battery, suitable for cars, motorcycles, off-road vehicles, agricultural vehicles, SUV, trucks, electric vehicles, lead-acid batteries. (Prohibited for use in lithium batteries.)
Note:1. Due to different light conditions and different monitors, item color displayed in photos may be showing slightly different from real object.2. Due to manual measurement, the size may be slightly different. Thank you for your understanding.
Package List:
1 * Car Battery Charger
1 * Manual ( English )
12V Car Battery and Alternator Tester
BM310 car battery tester is an easy-to-use tester built to facilitate the repairs and maintenance in car battery system for DIY amateurs or professionals.
It helps user to accurately test the car battery system of battery health, cranking and charging.
With a Multi-language User Manual: English, German, French, Spanish, Italian, Dutch, Polish, Slovak, Czech, Russian, No matter where you come from, you can use this battery tester
Car Tire Electric Compressor Digital Inflatable Pump With Indicator
Tyre Inflator Portable Compressor Digital Car Tyre Pump, Preset Pressure 12V 150PSI 40L/Min Rechargeable Air Pump for Car Bicycle Tires Balls Swimming Rings Toys, with LED Light and LCD Display
*** NOTE ***
The Pump Is Power By 12V Cigarettes Lighter Power Cord? Not Wireless.
?12V & 120W?120W Powerful power?will saves you more time to inflate In an emergency.
?Fast Auto-Inflation?The tyre inflator has 4 switchable pressure units (PSI, BAR, KPA, KG/CM?) so that you can preset the tire pressure as you want. The tyre pump would automatically turn off when reaching the preset tire pressure. The inflator has a maximum inflatable pressure of 150PSI.
?Multifunction?The pump allows to reach all tyres of your bicycles, motorcycles, cars (including SUVs). Also equipped with 3 nozzle adaptor for mattresses/airboat/toys/sports ball/ inflatables.
?Night Use?LED Highlight COB lights automatically illuminate when inflating. With LED Lights in the bottom and LCD real-time pressure display on the side, you could conveniently use the digital inflator as a tyre pressure gauge and inflator in the dark.
Do you have the following concerns...
The tire pressure of the car is lost as time goes by?
Tire pressure varies with temperature?
Need extra pressure for your bike or motorcycle?
Need extra pressure for mattresses/airboat/toys/sports ball/ inflatables?
This cordless portable pump is here to help!
12v Universal Car Motorcycle Tester Fault Detector Battery Tester Digital Alternator Teste
Description:
100% brand new and high quality
This battery tester, safe and easy to operate, has multiple functions: alternator state check, battery state check, check before charge and overload
display, telling us the state of alternator and battery, thereby assuring our driving safety.
Features:
Multiple functions: alternator state check, battery state check, check before charge and overload display.
6-LED display, clearly present the alternator and battery state.
Two testing clips for safe and easy operation.
Small size and light weight, convenient to carry.
Fit car, motorcycle, etc., with 12V battery.
Specifications:
LED quantity: 6 (2 red, 3 green and 1 yellow)
. Max voltage: 12V
Battery tester size: 13.5 * 5.5 * 3cm / 5.3 * 2.16 * 1.18in]
Package includes:
1 x Battery Tester with Two Clips