Note: This link only includes one E-type bracket
Type E: The hot shoe can be adjusted tightly. It can be installed on any
lamp holder . It is equipped with a tripod turning lamp holder screw, which can be installed on a tripod. The latest flash holder was launched in 2009. The hot shoe part can be removed. Combination installation of the light stand, tripod, the combination part is very convenient to install, built-in bayonet, with a safety lock, can be quickly installed at the junction of the light stand.
It can be applied to all kinds of flashes. After the flash is connected, it can be directly connected to any lamp holder, which is convenient for photographers to use the flash to fill light in multiple directions when shooting outside.
There is a jack for plugging in a reflective umbrella or soft umbrella at the lamp holder, and the flash angle can be adjusted 180 degrees. Better use the flash to light and fill up the object.
There are screws to tighten the flashlight, which can prevent the flashlight and the lamp holder from being unstable. The safety factor is increased.
In addition, our shop has a light stand and reflector umbrella and soft light umbrella that can be used with the lamp holder at the same time. Welcome to buy! A new multi-functional flash holder that can support both the light stand and the tripod is launched. The main material is made of cast iron, which is super load-bearing and durable. The bottom of the lamp holder adopts the universal screw hole design of the lamp holder, which can be installed in most special lamp holders; with aluminum alloy screw adapters, it can be used on the conventional PTZ quick-release plate; the main body of the lamp holder is composed of two sections and adopts a step-by-step design. The load bearing direction can be changed left and right by adjusting the knob, and the vertical load can be at least about 3 kg. The top of the lamp holder is composed of two parts. The self-contained adjustable pitch hot shoe is suitable for all Canon and Nikon flashes by adjusting the screw; when the hot shoe holder is removed, it becomes a small head with fine-tuning height. At the same time, the reflector/softlight umbrella socket designed by the lamp holder can be inserted into the standard size reflector/softlight umbrella. The lamp holder can be freely combined with any lamp holder, pan-tilt, flash trigger or similar equipment, and has a wide range of applications. It is a portable, sturdy, simple and comprehensive photographic aid. Maximum load: 3kg Product height: 12cm Product weight: 250g Multi-function flash holder:
1. The hot shoe of the lamp holder is made of metal parts, with adjustable screws for different standard flashing lights (excluding Sony Minolta port)
2. Umbrella hole Designed with a one-way circlip to prevent reverse insertion, and a locking screw to fasten the umbrella pole;
3. The joint part of the lamp holder adopts a toothed design and is equipped with a fastening handle to prevent the lamp holder from falling down instantly when tilted, which is beneficial to protect the lamp;
4. The lamp holder supports different lamp holder joints and is equipped with locking screws;
5. Exquisite workmanship , Sturdy and durable, load-bearing up to two kilograms of
