| Size (L x W x H cm) |
10.5x8x2.5 |
| Weight (kg) |
0.03 |
| Color |
Black |
Compatible with for / for series/for /for PS3/for switch controllers.
Custom Button Layout, map at most 12 physical buttons to arbitrary logical buttons for .
Rapid-fire,enable rapid-fire mode per each physical button.
Persistent Configurations, store and restore at most 10 configuration sets of button layout, rapid-fire settings, and it's speed
Firmware Updates,For bug fixes, or to improve compatibility, firmware updates are available.Twin stick Mode, When a for is connected to the 1P USB port, pushing PS button switch operation mode between the normal mode and the twin stick mode. MP07- -US is a board to connect USB gamepads to based arcade . For based system having standard power supply, video and audio outputs, such as exA-/ TypeX2,with the controller adapter, you can use standard USB gamepads to play games.
Mahjong Mode,When a USB keyboard supporting boot mode, though almost all keyboards will support, is connected, switches to mahjong mode.
USE Guide:
① Connect USB Type C port for power supply. It doesn't need data connection as it's just expected to suupply 5V power for . USB charger will be available. Of course, PC USB port can support the required power. PC-based system board could have a port for this use, e.g. exA- has USB ports. But if you want to use a device that requires much power, supplying via USB Bus from PC may not be enough and gets to be unstable.
② Connect port to the system board. You can use a general USB cable.
③ Connect USB gamepads at any time. You can connect and disconnect even during the bus is active.
④ When power is supplied, LED starts blinking. Once an address is assinged via bus, LED gets on. It will start blinking again if receives reset signal via JVS bus.
Colour:Black
Material:PCB+Metal Package Contents:
1 * to USB Converter Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
