| Model |
SY300 |
| Production Country |
China |
| Weight (kg) |
0.35 |
| From the Manufacturer |
N/A |
| Care Label |
N/A |
HEAT GUNRated Voltage: 230VRated Frequency: 50HZ-60HZRated Power input: 300W
Rated Voltage: AC120VRated Frequency: 50HZ-60HZRated Power input: 300W
HOW TO USE THE HEAT TOOL- Plug in the heat tool.
- Hold the product as shown on the picture .... Do not touch the hot nozzle.
- Keep 5-6cm distance between the heat tool and item.
- Do not use more than 2-3minutes continuously to prevent overheated.
Attention:- Do not blow the hot air gun directly at 90° to the object.
- The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm.
- The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it.
- The temperature of the hot air gun can only reach about 200°C, which cannot be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits.
Note: The hot air gun child with caution Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!Heat Gun Boot time not too long, to avoid burn out the machine!
Key Features
Do not blow the hot air gun directly at 90° to the object.
The recommended distance between the air outlet of the heat gun and the heating item is 5-6 cm.
The single use time of the heat gun should not be too long, usually 2-3 minutes. If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it.
The temperature of the hot air gun can only reach about 200°C, which cannot be used in industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits.
Heat Gun Boot time not too long, to avoid burn out the machine!
What's In the Box
1x Hot Air Gun
