Buy Grinding Mill Petrol Engine - Gx160 - 6.5hp in Nigeria
You May Also Like
DRAPER - Aluminium Oxide Bench Grinding Wheel - 150 X 19mm X 12.7mm Bore - 60 Grit
₦ 12,350.00
₦ 13,000.00
-5%
Featured Products
000RENG662578
Bosch
Professional Angle Grinder - Gws 2000 - 2000w 220v
Powerhouse 2000W motor for unmatched performance
Captivating multicolor design adds flair to your workspace
Versatile 180 mm size ensures efficiency in various applications
Electric precision, making it ideal for intricate tasks
Corded design ensures a continuous and reliable power source
Rubber Backing Pad: Diameter: 180 mm
Power Output: 1280 W
Grinding Spindle Thread: M 14
Main Handle: Straight
Disc Diameter: 180 mm
Rubber Backing Pad, Diameter: 180 mm
Vibration Emission Value Ah: 7 m/s & sup2;
Uncertainty K: 1.5 m/s & sup2;
Unleash the power of precision with the Bosch GWS 2000 2000W Professional Angle Grinder. This electric marvel, in captivating multicolor, boasts a robust 2000W motor, ensuring unparalleled performance. Perfect for intricate tasks, its 180 mm size and corded design make it a versatile powerhouse for any professional.
000RENG630899
Rehmie.com.ng
High Speed Grinder-2000w
1.Plug In And Chink The Indicator Light,Open The Crushing Machine Cover,Nothing In The GColourrinding Slot.
2.Fasten Up The Cover ,Switch On And Make The Machine Idle For One Or Two Minutes,No Abnormal Phenomenon,Then Use It.
3.Power Cut,Open The Cover,Load The Materials,Don & rsquo;t Over The Maximum,Fasten Up The Cover,Plug In And Switch On,During The Operation,Crushing Sound From Noisy To Uniform, It Mains That Crushed Into Powder,You Can Turn It Off.General Materials Need Thirty Seconds And High Hardness Of Materials Need One Or Two Minutes,Boot Time Shall Not Exceed 8 Minutes At A Time.
4.Power Cut,Open The Cover,Clean Up The Grinding Slot.
Notes:
1.It Is Suggested That The Materials Don & rsquo;t Exceed Two Thirds Of Crushing Slot
2.The Materials Must Be Dry,Should Not Be Wet.Something Have Water That Need To Dry Or In The Microwave Drying.
3.When You First Get Up,If The Material Is Meet By Blade,Make The Machine Can & rsquo;t Work,Please Power Cut Immediately,Prevents Motor Burn Out,Take Out The Foreign Body,Check The Fuse Is Good Or Bad And Restart.
4.During The Machine Working,Don & rsquo;t Open The Cover,Avoid To Cause Accidents,In The Case Of Open The Cover,Please don & rsquo;t Turn On ,Must Pull The Plug,Don & rsquo;t Use The Water Clean The Machine.
5.The Machine When Not In Use,Must Be Kept In Dry,Clean And Ventilated Place.
6.Before Using The Machine,Please Check:Screw Is Fixed And Rotation Of Blade Is Normal.
7.After Using For Long Time,If The Carbon Brush Wears Serious,It Need To Be Changed.
8.Product & rsquo;s Motor Belongs To Brush Motor,Boot A Spark,Carton Brush Wear Peculiar Smell,Belongs To The Normal Phenomenon
Note:The machine can't be washed with water,which will burn the motor.
Just wipe with a neat towel.
000RENG630897
Bosch
Professional Angle Grinder - Gws 22-230 + Cb
BOSCH PROFESSIONAL ANGLE GRINDER (GWS 22-230) + CB
Bosch Angle Grinder GWS 22-230 +CB is a compact powerful tool for the toughest jobs.
It has powerful 2200 W Champion motor for fast work progress, low weight for optimum handling with anti-rotation protective guard that reliably protects the user if the grinding disc breaks.
The tool has armoured coils that protect the motor against sharp grinding dust ensure long lifetime with double-sealed ball bearings and the especially sturdy gearing that guarantee a long lifetime.
Technical Specification Overview:
Rated input power
2,200 W
No-load speed
6.500 rpm
Grinding spindle thread
M 14
Main handle
Straight
Disc diameter
230 mm
Weight
5.2 kg
Switch
PROtection / Tri-Control (see scope of delivery)
000RENG630894
Bosch
Gws 22-230 H Angle Grinders - 230v - 2200w
Brand
Bosch Professional
Product Dimensions
19.5 x 13.5 x 59 cm; 6.48 Kilograms
Style
230 V
Power Source
Corded Electric
About this item
Powerful 2200 W Champion motor & ndash; for fast work progress
Low weight for optimum handling
Anti-rotation protective guard & ndash; reliably protects the user if the grinding disc breaks
Armoured coils that protect the motor against sharp grinding dust ensure long lifetime
Technical Details
Manufacturer
& lrm;Bosch
Part Number
& lrm;0601882L73
Product Dimensions
& lrm;19.5 x 13.5 x 59 cm; 6.48 Kilograms
Item model number
& lrm;0601882L73
Size
& lrm;230 V
Style
& lrm;230 V
Pattern
& lrm;Single
Power Source
& lrm;Corded Electric
Item Package Quantity
& lrm;1
Included Components
& lrm;1
Batteries included?
& lrm;No
Batteries Required?
& lrm;No
Item Weight
& lrm;6.48 kg
From the manufacturer
Rated power input: 2,200 W
No-load speed: 6,500 rpm
Grinding spindle thread: M14
Disc diameter: 230 mm
Weight: 5.2 kg
Length/height: 515/140 mm
Bosch GWS 22-230 H Professional Angle Grinder
Product description
A compact, powerful and durable angle grinder for the toughest jobs, equipped with a high-performance motor and inbuilt user protection.
This heavy duty mains-powered angle grinder, with its 2200 W Champion motor and light, compact, practical design, promises rapid work progress and ergonomic handling.
Armoured coils, double-sealed ball bearings and very sturdy gearing are part of the tool & rsquo;s durable specification, while user safety is enhanced by an anti-rotation protective guard, restart protection and a Protection switch.
Fast work
Equipped for heavy duty by a powerful 2200 W Champion motor, this angle grinder will deliver rapid work progress in the toughest of jobs.
Compact power
Along with high power, the tool offers a light, compact and ergonomic design for optimum handling.
User safety
A distortion-resistant anti-rotation protective guard reliably defends the user if the grinding disc breaks.
Restart protection prevents this corded tool from automatically starting up after a power cut.
A Protection switch extends over the entire length of the angle grinder & rsquo;s body. If the tool is dropped, this switch is released and the motor stops.
Long lifetime
For maximum durability, armoured coils protect the motor against sharp grinding dust, ball bearings are double-sealed and an especially sturdy gearing construction is specified.
000RENG630888
Rehmie.com.ng
Ingco - Angle Grinder - 4.5"
4.5" Angle Grinder INGCO has Powerful engine for fast working progress. INGCO tools are devoted to making professional quality tools affordable. INGCO believes that top quality refers to not only function, usability and appearance, but also efficiency, performance and maintainability
Powerful engine for fast working progress
11000 rolls / min
Voltage 220-240 V 50 Hz
Air vent
Comfortable rubber hand
Cylinder protector
High working efficiency due to the long life of the cylinder
Direct cooling for excess high capacity and long life
High protection for counter-rotation provides reliable protection.
000RENG630884
Rehmie.com.ng
Grinding Mill Petrol Engine - Gx200- 6.5hp
Looking for grinding machine for various function to grind and others such as Pepper, soft corn, etc.
Petrol grinding machine GX200 Max 6.5HP/RPM 6.5/3600,Max Nm/RPM 11/2600,Displacement 163cc,Bore x Stroke mm 68*45,Valve OHV,Shaft Horizontal,Cylinders 1, Cycles 4,Starting System Recoil/Key, Fuel Tank Capacity 3.6L,Fuel Petrol,Engine Oil Capacity 0.7L
Easy to couple
Ability to move about or station
Anti rot iron mill
100 percent copper engine
come with already sharp blade/mill
comsume low fuel
Ability to grind Maize, Milex, Tiger nut, Beans etc
17 inches mill pan
000RENG630881
Rehmie.com.ng
Ingco - Angle Grinder - 4.5" 950w
Angle grinders are a versatile power tool with a rapidly rotating disc that cuts, grinds, polishes, sharpens, and cleans a wide variety of difficult materials, including iron, copper, brass, brick, tile, stone, or mortar. The tool rotates the discs with a high amount of torque and an average operating speed .
The primary purpose of an angle grinder is to grind metal. It achieves this with the use of abrasive grinding discs that come in a range of materials, like aluminum, carbide, and diamond-tipped discs.
Voltage:220-240V~50/60Hz
Input power:750W
No-load speed:12000rpm
Disc diameter:100mm
Spindle thread:M10
With 1pcs auxiliary handle
Packed by color box
Air vent
Comfortable rubber hand
Cylinder protector
High working efficiency due to the long life of the cylinder
Direct cooling for excess high capacity and long life
High protection for counter-rotation provides reliable protection.
000RENG630878
MAXMECH
Angle Grinder 115mm 4-5 950w - Long Handle
Maxmech Angle Grinder 115mm 4-5 950W - long Handle An angle grinder, also known as a side grinder or disc grinder, is a handheld power tool used for grinding (abrasive cutting) and polishing. Although developed originally as tools for rigid abrasive discs, the availability of an interchangeable power source has encouraged their use with a wide variety of cutters and attachments. Uses for an Angle Grinder1.Remove Paint. Auto body shops often use an angle grinder as a method of removing paint. ...2.Remove Rust. Rust can also be removed using an angle grinder. ...3.Cut Ceramic Tiles. ...4.Remove Mortar. ...5.Stone Cutting. ...6.Cleaning Metal. ...7.Cutting Metal. ...8.Sharpening Tools.Features of Maxmech 4'' Angle Grinder AG 950-115L Rated Input Power 950W Rated Voltage 220V-240V Rated Frequency 50Hz No-load Speed 0-11000r/min Dimension 380 x 120 x 95 mm
000RENG630872
Rehmie.com.ng
Angle Grinder 3000w 9 Inches Ingco -ag30008
Angle grinder 3000w 9 inches INGCO -AG30008
Ingco tools are devoted to making professional quality tools affordable. ingco believes that top quality refers to not only function, usability and appearance, but also efficiency, performance and maintainability. the whole ingco team pay great attention to every detail to make ingco tools stand on the top of the world. all the ingco team are based in china to support the global marketing. we focus on finding partners overseas instead of setting up our own sales team. rather than making much advertisement, we prefer to save all extra expense to maximize the benefits to partners. ingco & mdash;make the world in your hands
WARRANTY:INGCO gives 6-months parts & service warranty on the power tools, during this period, our Repair Service is normally free of charge, for details of the services provided, please refer to our warranty conditions. In case of warranty, please present the original purchase receipt or warranty card or any proof of purchase; otherwise, we cannot repair your tool free of charge.
A well designed body and a 2-Position anti-vibration side handle that increases greater comfort and control for user in extended use applications & smoother work. The high performance motor provides strong output power and speed for professional cutting and grinding applications with faster material removal.
Specification
Brand:INGCO
Grinder Type:Angle Grinders
No Load Speed: 6300rpm
Spindle Thread: M14
Disk Diameter: 230mm
Other Accessories:1 Auxiliary Handle & 1 set of Carbon Brushes
Power Supply:3000W
Voltage:220-240V~50/60Hz
Model:AG30008
000RENG583196
Bosch
Angle Grinder Machine
Stable performance, rugged design, plus soft start and restart protection.The high removal rate of the new 2,200 W motor enables efficient work.Less heating of the entire motor system and better contact between the motor itself and the brushes, for a longer life.Soft start and protection against accidental restart, for greater user protection.Equipment. Additional Vibration Control handle 2 608 900 001Protective cover 1 619 P15 668Clamping flange 1 605 703 099Locking nut 1 603 340 040Two-hole key 1 607 950 0481 diamond disc, Standard for Universal, 230 x 22.23 mm 2 608 615 065.
000RENG574770
Bosch
Professional Metal Cut-off Grinder - Gco 200
Advantages of the GCO 200 Professional - the robust tool for the toughest applications.
Extremely robust lever and spring construction for the highest workloads.
Powerful 2000W motor with starting current limitation for fast work progress.
User-friendly quick clamping mechanism with continuously variable miter angle setting up to 45 & deg;.
Tried-and-tested Bosch angle grinder motor provides superior product lifetime.
Vertical D-handle for ergonomic working.
Integrated handle for easy transport.
Cutting Capacity Rectangle: 85X180 mm
Cutting Capacity L Profile: 138X138 mm.
Cutting capacity, square120 x 120 mm grinding bore diameter25.4 mm grinding disc diameter 355 mm no-load speed 3,500 rpm
High overload capacity.
Stability even on uneven surfaces Robust base with rubber feet.Warranty-6 months on product
000RENG574765
MAXMECH
Angle Grinder 115mm 4-1/2" 950w Long Handle
An angle grinder is a multipurpose power tool that can be used for different projects. You can cut metal, aluminium, concrete, bricks, pavers, wood, and other dense materials; you can sand and polish different surfaces to sharpen tools and grind materials. Angle grinders can be used with different types of discs for different jobs.
Technical specifications:
Rated Voltage: 220-240V
Frequency: 50Hz
Rated input power: 950W
No load speed: 0-1100r/min
