Industrial UPS with Hybrid Solar Charge Controller [3.5KVA 48V] S.N. PARAMETERS SPECIFICATIONS (A) BATTERY MODE 1 No Load Battery Current (Maximum) ≤ 2.0A 2 O/P No Load Voltage (Max.) 220V ± 5V 3 O/P Full Load Voltage @ rated DC Voltage 220V ± 7% 4 Output Frequency (Inverter Mode) 50.0 Hz ± 1.0 Hz 5 Full Load Battery Current (Maximum) AS PER TABLE 'A' 6 Full Load O/P Current AS PER TABLE 'A' 7 No Load Watt Loss @ Switch Off < 5W 8 Overload Condition 120% 9 Overload Current CONTROLLED AS PER TABLE 'A' 10 Short Circuit Condition 300% 11 Auto Reset Feature Available 12 Output Sine Wave (Inverter) Pure Sine Wave 13 THD Less than 3% (B) MAINS MODE (NORMAL MODE) 1 Mains Low Cut 100V ± 5V 2 Recovery Low Cut 110V ± 5V 3 Mains High Cut 280V ± 5V 4 Recovery High Cut 275V ± 5V 5 Change Over Time (Mains to Inverter) <40 ms 6 Change Over Time (Inverter to Mains) <7 ms 7 Batt Low Buzzer (Volt Per Batt) 10.9V ± 0.2V 8 Batt Low Cut (Volt Per Batt) 10.8V ± 0.2V (C) MAINS MODE (UPS MODE) 1 Mains Low Cut 180V ± 5V 2 Recovery Low Cut 190V ± 5V 3 Mains High Cut 260V ± 5V 4 Recovery High Cut 255V ± 5V 5 Change Over Time (Mains to UPS) <12 ms 6 Change Over Time (UPS to Mains) <7ms (D) CHARGING MODE (Mains)
1 Max. Charging Current (NC) 12A ± 1.5A (18A ± 1.5A for 5KVA 48V only) 2 Max. Charging Current (HC) 15A ± 1.5A (22A ± 1.5A for 5KVA 48V only) 3 Boost Charging Voltage Per Batt (HC/NC) 14.4V ± 0.2V/ Battery 4 Float Charging Voltage Per Batt 13.7V ± 0.2V/ Battery (E) HYBRID MODE (Solar - 40A Max) 1 Max. Charging Current (HC) 30A ± 1.5A