W3001
Features:
automatic mode
Wide temperature control range
High temperature control accuracy
reverse connection protection
easy installation
Product parameter
Product name: Microcomputer temperature controller
Product Model: XH-W3001
Supply voltage: 12/24/220V
Temperature measurement range: -50℃~110℃
Temperature control range: -50℃~110℃
Temperature control accuracy: 0.1℃
Load power: 120/240/1500W
Measurement input: NTC10K waterproof probe L=1 meter
output type: direct output
Output capacity: max 10A
Installation hole distance: 73mm (diameter 4mm)
Appearance size: 60*45*31mm
Instruction
To set the startup temperature:
Pre the up on once, the startup temperature will be displayed, long pre the up on for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down on
Set stop temperature:
Pre the down on once to display the stop temperature, long pre the on for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down on
reset:
When the power is on, pre and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory setting
Shipping list:
Thermostat X1
W3002
Introduction to the selling point:
The high-brightne digital tube clearly displays, whether it is used during the day or at night, it can be read clearly
The r can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at will
ABS material shell, exquisite and beautiful, high mechanical strength, good electrical performance, anti-aging
-50~110℃ ultra-wide temperature control range, can be used in various temperature control fields, 0.1℃ temperature control accuracy, to meet your control need
Wiring input and output design, more convenient to use in various industrial control equipment, multi-strand wire 300V/20A exce configuration, safe and reliable
product information:
Product name: Microcomputer temperature controller
Product Model::XH-W3002
Temperature measurement range: -50~110℃
Temperature control range: -50~110℃
Temperature measurement accuracy: ±0.2℃
Temperature control accuracy: ±0.1℃
Measurement input: NTC10K L=1 meter waterproof probe
Input power: 12/24/220V
Output power: 120/240/1500W
output type: direct output
Output capacity: max 10A
Installation hole distance: 73mm (diameter 4mm)
Appearance size: 60*45*31mm
Set up using:
Code and function introduction
P0 set startup temperature
Pre the setting on once to enter the internal menu, the default display is P0, pre the setting on again, and set the required startup temperature by preing the up and down ons.
P1 set stop temperature
Pre the setting on once to enter the internal menu, the digital display is P0, switch to P1 by preing the up and down ons, pre the setting on again, and set the desired stop temperature by preing the up and down ons.
P2 Set temperature correction
Enter the internal menu in the same way, switch to P2 by preing the up and down ons, pre the setting on again, and set the required calibration temperature by preing the up and down ons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature.
P3 set delay start
Enter the internal menu in the same way, switch to P3 by preing the up and down keys, pre the setting key again, and set the required delay time (unit is minutes) by preing the up and down keys. Delay start is generally used for compreor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compreor back preure, the general setting value is 3-6 minutes. If you are not used to control the compreor or do not need delay time function, skip this item directly.
Shipping list:
Thermostat X1
About shippingShipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).
Special Announcement:Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .
Your 100% satisfaction is very ant to usIf the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.
Key Features
Is Smart Device:No
Measure Type:K
Cable Length:1M
Type:K
Theory:Temperature Controller
Usage:Household
Model Number:W3001 XH-W3001 W3002 XH-W3002
Max Measuring Temperature:100°C - 119°C
Display Type:DIGITAL
Power Type:Charger
Display Size:1.9 Inches & Under
Style:Wall Hanging
Origin:Mainland China
Certification:CE
Type1:Digital Temperature Meter Tester
Type2:110V 220V Temperature Controller
Type3:Digital thermostat for refrigerator
Feature:NEW Digital thermoregulator
What's In the Box
1X DM-W3001 XH-W3001/W3002 Digital Control Temperature Microcomputer Thermostat Switch Thermometer New Thermoregulator 12V/24V/220V
