Our safety locks adhere strongly to textured finish. Usually the refrigerator door is made of metal or plastic. 3M stickers are ideal for use on these surfaces. The textured finish also has plastic property. Please follow the procedures listed below to ensure the lock is properly installed. Once it is properly installed, we guarantee you that is a best decision taken to keep your kids protected.
Dimension
1. Lock Dimension: length 8.5in X width 1.75in X depth 0.6in;
2. Adjustable Strap: Strap allows to be adjusted (2.1 to 4.9 in) to fit any size of appliance and furniture. Just choose the length you need before installation.
Strap Length Adjustment
1. Push side buttons to take out the base;
2. Pull out the sliding fix;
3. Take out the strap;
4. Cut off the strap excess by scissors according to length requirement(do not cut into the groove because it will keep the strap will not be pulled out);
5. Fix the strap on the lock, make sure the strap groove will fix in the prominent part on the lock;
6. Install the base back to the lock.
Installation Guide
1. Confirm the installation position of the lock with a temporary mark if necessary;
2. Clean the installation area to keep the surface free of stains, powder and liquid;
3. Tear off the 3M adhesive and paste the lock to specified position, rest it for 24 hours;
4. Move the side button to "lock" or "unlock" position, control the DOUBLE LOCK system;
5. Press the two buttons against each other of each lock at the same time to unlock;
6. Either lock can be freely opened and turned around.
Other Specification
1. Color: Grey/white from cap with white main body;
2. Material: The lock is made of ABS industry plastic, the strap is made high strength PE plastic
3. No Drilling required
4. Double Lock structure
