ABB Drives ACS 150 AC Frequency Inverter with Keypad and Potentiometer for 4kW (5.5HP) 400V 3 Ph motor in VxF control to 8.8A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R1 Size - 70mm Wide x 161mm Deep x 202mm high (plus cable clamp plate at 37mm) IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.
Braking - To 70 Ohm Minimum, 110 Ohm Maximum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features - Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current - 13.6A, or 7.7A when supplied via a minumum 2.7mH AC Input choke (see the products linked below) to reduce the metered kVA from 9.4kVA per drive, to 5.3kVA.
Input Voltage - 380 to 480V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 94W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.