Specifications:
Material:Polyetherimide
:Amber transparent solid
Size:220*220*0.8mm
Features:
PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for rafts used for better adhesion.
PEI (polyetherimide) is amber transparent solid, any additives of PEI particle images do not add have low inherent flame retardancy and , the oxygen index of 47% combustion of UL94-V-0 grade, the density is 1.28~1.42g/cm3.
High temperature stability, even if it is non reinforced PEI, it still has good toughness and strength.
It has excellent mechanical properties, radiation resistance, high and low temperature resistance and wear resistance, and can also be transmitted through microwave. Good flame retardancy, chemical resistance and electrical insulation characteristics.
How to Use:
Special note - Please remove both sides of the teal colored before using.
Cut the PEI sheet to size by scoring with a hobby . There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.
The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.
Once the PEI sheet is attached, re-level your print bed and you are ready to go!
It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.
a a a a a
Key Features
Size:220x220x0.8mm
:Amber transparent solid
Material:Polyetherimide
Radiation resistance
High and low temperature resistance
Good wear resistance
Good flame retardancy
Easy to use
Exquisite Workmanship
Well Made
Best Choice and best discounts
Customer Care is Our Top Priority
Offer is Subject to Availability
Big Sale
What's In the Box
1 x PEI Sheet 1 x Adhesive