Buy 18W 230mm LED Swimming Pool Party Light Stainess 100% Resin

18W 230mm LED Swimming Pool Party Light Stainess 100% Resin Filled RGB AC12V

₦ 487,994.36 ₦ 513,678.27 -5%

0 No Reviews

Product SKU: RENG253304

Brand: Generic

Quantity

In Stock

100% Secure Payments

TrustPay

Pay Online Delivered T&C^*

Delivery Information

Shipped from overseas and normally delivered between 20-35 days

Have one to sell? Sell on rehmie

Product Specifications
Description

Model	JMVANLIN664293
Production Country	China
Size (L x W x H cm)	48 x 32 x 7
Weight (kg)	1.1
Certifications	Organic
Color	multicolor
Main Material	1
From the Manufacturer	1
Care Label	1

Safety Warning:
- a licensed or certificated electrician or a qualified serviceman is allowed to install or maintain this product.
- Must be installed in accordance to the requirements of your government standard or local authorities.
- Never handle it with wet hands and feet.
- This light is design for use when fully submerged in water.
- Never operate this light for more than 1 minutes unless it is totally submerged in water.
- All lights are requires to be disconnected from the main electricity before any operation of maintenance.
- Maximum depth range for the light installation: 1~10 meter
- Maximum water temperature range for the light: -20℃ ~ 35℃

Light Specifications:
Model: 8004S
Work voltage: AC 12V
Light : 252 LED 18W
Light :
Waterproof degree: IP68
Size: about 230x35x133mm

Installation:
preparing to install
a. Make sure the pool and its electrical system meets the requirements of the current national or local electrical codes and ordinances.
b. This light can be installed in both concrete pools and fiber glass pools.
. This light is designed to be used in new pools and/or pools with existing surface mounted lights that need replacement.
d. Use good quality stainless steel screws or screws provided along with the light.
e. The light must be used or operated while fully submerged underwater . Never switch on the light if it is not underwater.

Installation Notes
a. Make sure to install the bracket on a vertical wall of the pool.
b. Make sure the top of the light should be at least 450mm below normal water surface.
. Reserve at least 150mm long backup wire wrapping on the back of the light, for the convenience of replacing.
d. The junction box or the 12V low voltage transformer, should be located at least 300mm above the water surface, at least 200mm above the ground, and at least 1200mm from the edge of the pool.
e. To achieve synchronization, make sure all the lights are installed correctly on model and characteristics as the one replaced.

RGB light Control Operation:
16 pre-programmed modes of RGB Lights:
1. Blue: static blue 2. Red: static red
3. Green: static green 4. RB: static purple
5. BG: static cyan-blue 6. RG: static yellow
7. RGB: static white 8. RGB change gradually to R/G/B
9. R-G-RG slow animation 10. B-G-BG slow animation
11. R-B-RB slow animation 12. RB-BG-RG slow animation
13. R-G-B fast animation 14. B-G-R fast animation
15. Six colors fast animation 16. R-G-B slow animation

RGB Operation:
-Any of the 16 modes can be selected with the ON/OFF switch of your pool lights
-Turn the light ON. The first time the light is turned on, the begins with Blue(mode 1). The 16 modes will begin to run automatically.
-To change the , turn the light OFF and then ON within 1.5 seconds. Continue turning OFF and ON until the desired light mode is reached.
-When the light is turned OFF for more than 1.5 seconds, it will return to the beginning of the cycle(mode 1).

Note 1: If a remote control device is used, the modes can also be selected with the controller. one remote control device can be adapted to 30 pool lights simultaneously within 100 meter.
Note 2: If the light is used with Direct Current (), a DMX 512 control and WIFI control is available.

Maintenance and Replacement:
a. There is no maintenance required for this light. It is designed to be used once, meaning that replacement is necessary if it becomes defective. The repairing is impossible.
b. Before servicing the light, always disconnect at the circuit breaker to it. Make sure there is NO voltage supplied to the light.
To replace the light, unfasten it from the bracket. Make sure the new light is the same switch.

Package included:
1 x Led Swimming Pool Light with cable
1 pack x Screws accessories
1 x Manual
(No included remote control)

Note:
-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
-Please allow 1-3CM differs due to manual measurement.
-Due to the different display and different light, the picture may not reflect the actual of the item. Thanks for your understanding.

a a a a a

Key Features

- Never handle it with wet hands and feet.
- This light is design for use when fully submerged in water.
- Never operate this light for more than 1 minutes unless it is totally submerged in water.
- Maximum depth range for the light installation: 1~10 meter
- Maximum water temperature range for the light: -20℃ ~ 35℃
Work voltage: AC 12V
Light : 252 LED 18W
Light :
Easy to use
Exquisite Workmanship
Well Made
Best Choice and best discounts
Customer Care is Our Top Priority
Offer is Subject to Availability
Big Sale

What's In the Box

1 x Led Swimming Pool Light with cable 1 pack x Screws accessories 1 x Manual (No included remote control)