Flame Gun Cartridges - 4pieces
A blowtorch, or blowlamp, is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. Their fuel reservoir is disposable or refillable by exchange.
Flame Gun Welding Gas Torch
Adjustable - Flame and temperature can be adjusted, the temperature can be as high as 1300 Deg.C.Automatic - Fully automatic electronic ignition, safe and easy.Recyclable - It can be fixed on Cassette butane tank ( not included ), which can be replaced, cycle use is environmentally-friendly.Combustion Value : 50 - 140g / h. A can of gas can use 1.6 hours to 2 hours continuously, replace the new tank just need a little seconds.Practical and Applicable - Wind proof, moisture proof and water resistant, better than electric welding. Suitable for restaurant, household, picnic, hiking, camping and other outdoor activitie. sold by www.konga.com/merchant/stillbooting 1. Please keep away from the kids.2. Power off when you change the gas.3. Be sure no gas is leaking before you use it. Suitable for restaurant, household, picnic, hiking, camping and other outdoor activities. (Barbecue and caramel,ect.)
Mapp Welding Torch And Cartrige
Genuine MAPP gas can be used in combination with torch for heating, , and even because of its high temperature of 2925 & deg;C (5300 & deg;F) in oxygen. Although acetylene has a higher flame temperature (3160 & deg;C, 5720 & deg;F), MAPP has the advantage that it requires neither dilution nor special container fillers during transport, allowing a greater volume of fuel gas to be transported at the same given weight, and it is much safer in use. nevertheless all safety precaution regarding welding are expected to be observed by the user. A MAPP/oxygen flame is not entirely appropriate for welding , due to the high concentration of in the flame & ndash; higher than acetylene, but lower than any of the other petroleum fuel gases. The hydrogen infuses into the molten steel and . For small-scale welding with MAPP this is not a serious problem, as the hydrogen escapes readily, and MAPP/oxygen can in practice be used for welding small steel parts. MAPP/oxygen was advantageously used in underwater cutting, which requires high gas pressures (under such pressures acetylene can decompose explosively, making it dangerous to use). However, underwater oxy/fuel gas cutting of any kind has been largely replaced by because it cuts more quickly and safely. MAPP gas is also used in combustion with air for brazing and soldering, where it has a slight advantage over competing fuel because of its higher combustion temperature of 2,020 & deg;C (3,670 & deg;F) in air. a MAPP/oxygen flame is still highly desirable, having higher flame temperatures and energy densities than any flame other than acetylene/oxygen, but without the dangers and inconveniences of acetylene/oxygen. Jewellers, glassbead makers, and many others find it very useful. Plumbers, refrigeration and HVAC engineers and other tradesmen also value the high heat capacity of the MAPP/air flame; MAPP was until recently widely used, supplied in small to medium size containers. Blowtorches are used to brown and sear food cooked by low-temperature techniques. Myhrvold recommends in Modernist cuisine: the art and science of cooking that MAPP gases should be used in preference to cheaper butane or propane as they produce higher temperatures with less risk of giving the food a gas flavour, as can happen with incompletely combusted gas. The torch is not self ingnition type you need spark lighter to ignite
Welding Flame Gun With Catridge
A blowtorch, or blowlamp, is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. Their fuel reservoir is disposable or refillable by exchange.
Welding Flame Gun With Catridge
Adjustable - Flame and temperature can be adjusted, the temperature can be as high as 1300 Deg.C.Automatic - Fully automatic electronic ignition, safe and easy.Recyclable - It can be fixed on Cassette butane tank ( included included), which can be replaced, cycle use is environmentally-friendly.Combustion Value : 50 - 140g / h. A can of gas can use 1.6 hours to 2 hours continuously, replace the new tank just need a little seconds.Practical and Applicable - Wind proof, moisture proof and water resistant, better than electric welding. Suitable for restaurant, household, picnic, hiking, camping and other outdoor activitie. sold by www.konga.com/merchant/stillbooting whats in the package Gas flame or welding gun Gas cartridge 1. Please keep away from the kids.2. Power off when you change the gas.3. Be sure no gas is leaking before you use it. Suitable for restaurant, household, picnic, hiking, camping and other outdoor activities. (Barbecue and caramel,ect.)
