175a Dc Breaker 125vdc
The BR-DC175 and BR-DC250 are the same DC breakers installed in the MidNite and Magnum Panels system enclosures, and included with the MPX extensions. These breakers function as the inverter & rsquo;s DC disconnect switch and can be used as the battery-to-inverter circuit protection in most installations. These breakers are specifically designed and tested to work with MidNite Solar and Magnum inverters to provide the delay time needed to minimize nuisance breaker tripping.
175a Dc Breaker 125vdc
₦ 257,400.00
₦ 260,000.00
-1%
Midnite Solar Inverter DC Breaker - 175A 125vdc
The BR-DC175 and BR-DC250 are the same DC breakers installed in the MidNite and Magnum Panels system enclosures, and included with the MPX extensions. These breakers function as the inverter & rsquo;s DC disconnect switch and can be used as the battery-to-inverter circuit protection in most installations. These breakers are specifically designed and tested to work with MidNite Solar and Magnum inverters to provide the delay time needed to minimize nuisance breaker tripping.
Mnepv20 20a Dc Din Rail Mount Breaker
These breakers are rated to break the full rated load at the rated voltage repeatedly (when mounted in a Midnite Solar enclosure), with NO DAMAGE. Always use a properly sized breaker for disconnecting. The breakers have been evaluated by ETL to 150VDC. All of the NRTL listings apply also, making them suitable for the solar industry.
Environmental Rating - Type 1 (Indoor)
DC Voltage Rating - 150VDC
Wire Size Range - 14 to 6 AWG
Width - .51 in (13mm)
Number of poles - 1
Battery Capacity Meter MNBCMS
The "S" version (MNBCMS) of the meter has an additional short wire attached. This wire is the "Switched lead" This feature allows the LEDS to be turned off while retaining the Battery Care memories. This wire should be connected through a fused switch to Battery positive. This is usually the ignition switch of a vehicle, but can also be any type of push button, or toggle switch.
FEATURES:Led & rsquo;s that correspond to battery voltageAccuracy +- .05%Auto sensing for 12, 24, 36, and 48 volt batteriesLED indicators show if batteries have received a full charge recently, longer than one week or longer than two weeksComes with 9 ft. 10 in. of 22 AWG wireIdeal for "at a glance" readings or golf carts, forklifts, etc.Warranty - 5 yrs.Made in the USADescription: This Battery Capacity Meter allows the LEDS to be turned off while retaining the Battery Care memories.
Surge Protection Device MNSPD-300 DC Lightning Arrestor
Midnite Solar Surge Protection Device 300VDC 120/240 VAC MNSPD-300-DC
The MidNite Solar Surge Protective Device (MNSPD) is a Type 2 device per UL1449 rev3, designed for indoor and outdoor (NEMA 4X) applications. Newly engineered for DC electric systems (there is also an AC version now available for 120VAC only systems - see DOCUMENTS tab above for explanation between the two), it provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. This 300V DC model is ideal for off grid PV combiners and 120/240 VAC circuits.
Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. The Midnite SPD's are mounted on the outside of a PV combiner and have blue LED's viewable from a distance that show your system is still protected from power surges. The MidNite SPD's are built to last. Each MNSPD is capable of clamping a 115,000 amp surge.
Environmental Rating - Type 1 (Indoor)
- 5 yrs.
Listed by ETL for US & Canada
Made in the USA
MidNite Solar Surge Protection Device MNSPD-300 AC Lightning Arrestor
The MidNite Solar 300V AC Surge Protector Device (MNSPD) is a Type 2 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for 120 VAC and 120/240 VAC circuits.Environmental Rating - Type 4X (Outdoor)
Warranty - 5 yrs.Listed by ETL for US & CanadaMade in the USASPD Installation VideoSPD Comparison Test VideoSPD Install - Hawaii Video
