Buy Mestek Products online in Nigeria

Thickness Guage LCD Display Fe/NFe Automobile Car Paint Coating Thickness Tester

This coating thickness tester has LCD display with backlight, easy to read values. Two measurement modes design, with single point measurement mode and continuous measurement mode for you to adjust. Support upper and lower Limit value locking, custom calibration, high alarm and low alarm function, data clearing, μm/mil unit conversion, automatic switch-off for approx. 10 minutes without operation. Support detect steel, iron, copper, aluminium, alloys, etc. And also can detect the thickness of non-conductive coating (such as paint, oxide film, plastics, ceramic) on the surface of metal materials.Features:LCD Digital Display: LCD backlit display with clear definition, no fear of day and night, no fear of summer and winter temperature changes, and easy to read values.Single Point Mode: Quickly press the probe vertically against the surface of the substrate to be measured, a beep will sound and the measurement value will be displayed on the screen, the probe should leave the surface of the substrate for more than 50mm before another measurement, the measurement interval is 2 seconds.Rapid Continuous Measurement Mode: The instrument is held in the hand and the probe is quickly pressed vertically against the surface of the substrate to be measured, the measurement value is displayed on the screen, the measurement point can be changed at will or slid on the surface of the substrate to quickly complete continuous measurement.Composite Probe: Suitable for Fe magnetic materials, NFe nonmagnetic materials. v-groove, for measuring convex curved surfaces such as the surface of steel pipes.Upper and Lower Limit Value Locking: When the measurement status screen shows a number, short press MAX/MIN to change the desired upper and lower limit value locking function, multiple measurements on the substrate surface will lock the upper and lower limit value of the measurement.Custom Calibration: Place the standard 50μm/100μm/250μm/500μm/1000μm individually on the surface of the iron or aluminium substrate, the corresponding calibration point should be displayed when the instrument probe is in contact, if the screen shows a large error with the placed standard, press CAL in the same way as zero-calibration.Alarm Function: With high alarm and low alarm function, high 1500μm, low 0μm default alarm value, support alarm setting mode, easy to adjust the alarm value size, can set any alarm thickness value.Multi-functional Design: Data clearing, μm/mil unit conversion, automatic switch-off for approx. 10 minutes without operation.Applicable Materials: This instrument is a necessary measurement tool for material surface treatments projects, and can detect steel, iron, copper, aluminium, alloys, etc. And also can detect the thickness of non-conductive coating (such as paint, oxide film, plastics, ceramic) on the surface of metal materials.Wide Applications: It can be widely used in automotive manufacturing, metal processing, industrial manufacturing, used car market, etc.Specifications:Name: Coating Thickness Tester Material: plastics+metalBattery: 2 * 1.5V AAA batteryMeasuring ranges: 0-1500μmAutomatic switch-off: approx. 10 minutesMeasuring method: single/continuousMin. convex radius of curvature: 5 mmMin. concave radius of curvature: 50 mmMin. measuring area diameter: 20mmMinimum substrate thickness: iron based 0.5mm/aluminium based 0.3mmOperating current: approx. 30mAWorking environment: 0~50C/0 ~ 80%RHItem size: 120 * 48 * 26mm / 4.72 * 1.89 * 1.02inItem weight: 95g / 3.35ouncePackage size: 160 * 80 * 70mm / 6.30 * 3.15 * 2.76inPackage weight: 200g / 7.05ouncePacking List:1 * Coating Thickness Tester 1 * Lanyard1 * Screwdriver1 * Flannel Bag1 * Standard Sheet1 * ManualKey FeaturesLCD Digital DisplaySingle Point ModeRapid Continuous Measurement ModeComposite ProbeUpper and Lower Limit Value LockingCustom CalibrationAlarm FunctionMulti-functional DesignApplicable MaterialsWide ApplicationsWhat's In the Box1 * Coating Thickness Tester 1 * Lanyard1 * Screwdriver1 * Flannel Bag1 * Standard Sheet1 * Manual

Handheld Combustible Gases Leak Detector Natural Gases

This meter is a combustible gases leakage detector, which is used to detect the leakage of combustible gases quickly and reliably. Convenient for users to safely detect and test a variety of combustible gases types, easy to meet different test needs. Two specifications are available, you can choose between CGD01B or CGD02B depending on your needs. Widely used, extensive application scenarios meet the detection needs, suitable for water heating device detection, gases pipeline detection, kitchen gases detection, restaurants and hotels, chemical plants, gases tankers, etc.Features:Portable gases detector, compact body, quick response, easy to detect leaks quickly.The housing is made of high strength ABS-engineered plastics, which is dust-proof and fall-proof， and has a long service lifespan.Using interference resistance sensors is highly sensitive and high-precise, and can provide a more accurate measurement.Convenient for users to safely detect and test a variety of combustible gases types, easy to meet different test needs.Measurable gases types (partial list): methane, ethanol, gasoline, propane, , oxirane, n-hexane, , ethylene, carbon monoxide, , ethane, etc.The extended flexible probe with flexible adjustment of the arcs, is suitable for a variety of special and complex scenarios.Triple alarm design (sound/backlight/screen display), when the detection value of gases leakage is above the threshold, the instrument will promote sound, the backlight will be red, and the screen display "HIGH" alarm.​With the concentration unit switching function, a button switches the measurement unit between PPM and %LEL.​Widely used, extensive application scenarios meet the detection needs, suitable for water heating device detection, gases pipeline detection, kitchen gases detection, restaurants and hotels, chemical plants, gases tankers, etc.Two specifications are available, you can choose between CGD01B or CGD02B depending on your needs.CGD01B: Analogs circle, 50-10000PPM measurement ranges, powered by 3 * AAA battery(not included), 5 minutes automatic shutdown.CGD02B: Digital concentration display and analogs bar, 50-50000PPM/0-100%LEL measurement ranges, powered by built-in 18650 battery(included), 10 minutes automatic shutdown.Specifications:Name: Combustible Gases DetectorMaterial: plasticsModel: CGD01B, CGD02B (optional)Sampling method: DiffuseResponse speed: Starting in 2 secondsCalibration mode: 30 seconds automatic calibrationAlarm mode: sound, backlight, screen displayTest Gases (partial list): methane, ethanol, gasoline, propane, , oxirane, n-hexane, , ethylene, carbon monoxide, , ethane, etc.Preheat time: 30 secondsOperating temperature: 0-50°CWorking humidity: 0-70%RHStorage environment: -10~50°C (5%-95%RH)CGD01B:Battery: 3 * AAA Alkaline Battery (not included)Display: analogs circleTest ranges: 50-10000PPMAuto off: 5 minutesWorking current: 120mAhCGD02B:Battery: 1 * 3.7V, 2000mAh 18650 lithium battery (included)Display: digital LCD concentration display and analogs barTest ranges: 50-50000PPM/0-100.0%LELTest flowrate: 1L/minGases resolution ratio: 1%LEL/1PPM interface: USB Type-CUSB : 5V, 1AMeasurement resolution: ＜±5%LEL, ＜±500PPMAuto off: 10 minutesWorking current: 185mAhHose length: 285mm / 11.22inItem size: 165 * 53 * 34mm / 6.50 * 2.09 * 1.34inPackage size: 190 * 65 * 45mm / 7.48 * 2.56 * 1.77inPackage weight:CGD01B: 220g / 7.76ounceCGD02B: 370g / 13.05ouncePacking List:1 * Combustible Gases Detector1 * GuidelineKey FeaturesPortable gases detector, compact body, quick response, easy to detect leaks quickly.The housing is made of high strength ABS-engineered plastics, which is dust-proof and fall-proof， and has a long service lifespan.Using interference resistance sensors is highly sensitive and high-precise, and can provide a more accurate measurement.Convenient for users to safely detect and test a variety of combustible gases types, easy to meet different test needs.Measurable gases types (partial list): methane, ethanol, gasoline, propane, , oxirane, n-hexane, , ethylene, carbon monoxide, , ethane, etc.The extended flexible probe with flexible adjustment of the arcs, is suitable for a variety of special and complex scenarios.What's In the Box1 x Combustible Gases Detector,1 x Guideline

Full Angle Inverted Display Screen Non-destructive

This powerful non-destructive induction moisture meter can detect the moisture of wood for you, you can use it to test the wood in your home, and it also works for drywall and masonry wall detect, come on and have a try, it will not let you down.Features:This mositure detector with four measurement modes: Drywall pattern, masonry pattern, softwood pattern, hardwood pattern, this tool also can be used for other materials.Adopt VA full vewing angle reverse display screen, you can read the data more clearly, also easy for you to operate.Adopt electromagnetic w-ave sensors, it is suitable to measure the object which thickness is greater than 20mm, and the area of the object need be greater than 40*40mm.℃ and ℉ units conversion function, you can change the units quickly for your different needs.Ambient temerature and humidity detection function: With the temperature and humidity sensors to detect the ambient temperature and humidity for you.Over-range alarm function: When the detect value of drywalll and masonry > 70% , and when the detect value of softwood and hardwood>17% , the b-uzzer will warning.Specifications:Material: ABSMeasuring Ranges:Softwood: 0%~55%Hardwood: 0%~35%The humidity readings of drywall and masonry are relative values: 3 * AAA battery (NOT included)Detection thickness: 20mmAutomatic shut-down: 10 minutesWorking current: 35mAOperating temperature: 0~40℃Working humidity: 0~70%Storage environment: -10~50℃ (5%95%RH)Item size: 132 * 73 * 33mm / 5.2 * 2.9 * 1.3inItem weight: 150g / 5.3ouncePackage size: 160 * 90 * 50mm / 6.3 * 3.5 * 2.0inPackage weight: 200g / 7.1ouncePacking list:1 * Wood Moisture MeterKey FeaturesThis mositure detector with four measurement modes: Drywall pattern, masonry pattern, softwood pattern, hardwood pattern, this tool also can be used for other materials.Adopt VA full vewing angle reverse display screen, you can read the data more clearly, also easy for you to operate.Adopt electromagnetic w-ave sensors, it is suitable to measure the object which thickness is greater than 20mm, and the area of the object need be greater than 40x40mm.℃ and ℉ units conversion function, you can change the units quickly for your different needs.Ambient temerature and humidity detection function: With the temperature and humidity sensors to detect the ambient temperature and humidity for you.Over-range alarm function: When the detect value of drywalll and masonry > 70% , and when the detect value of softwood and hardwood>17% , the b-uzzer will warning.What's In the Box1 x Wood Moisture Meter