30w Gigabit Poe+/poe Injector- Poe200
Specification ModelPOE200No. of channels1Pass Through Data Ratesi10/100/1000MbpsPower over Ethernet OutputPin Assignment and Polarity: 1/2 (-), 3/6 (+)Output Power Voltage: 54VDCUser Port Power: 30W maxInput Power RequirementsAC Input Voltage: 100 to 240 VACAC Input Current: 0.5A 100-240 VACAC Frequency: 50 to 60 HzDimensions121mm x 50mm x 36mmIndicatorsSystem Indicator: AC PowerUser Indicator: Channel PowerConnectorsShielded RJ-45, EIA 568A and 568BProtectionOver current protectionOver load protectionOver voltage protectionAnti-interference protectionEnvironmental ConditionsOperating Ambient Temperature:-40 to 40℃Operating Humidity: Maximum 85%, Non-condensingStorage Temperature:-40 to 50℃Storage Humidity: Maximum 90%, Non-condensingKey Features Up to 30W Power SupplySupports 10/100/1000 Base-T applicationsLED indicators power input and PoE outputInternal AC/DC converter no need for external power brickEasy plug-and-play installationMuti-protection
1.25gb/s Sfp Sm100gsa-20
SM100GSA-20 Copper Small Form Pluggable(SFP) transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.The 1000BASE-T uses the SFP's RX_LOS pin for link indication. If SFP's TX_DISABLE pin, PHY IC be reset. SFP to Host Connector Pin Out PinSymbolName/DescriptionRef1VEETTransmitter Ground (Common with Receiver Ground)12TFAULTTransmitter Fault. Not supported. 3TDISTransmitter Disable. Laser output disabled on high or open.24MOD_DEF(2)Module Definition 2. Data line for Serial ID.35MOD_DEF(1)Module Definition 1. Clock line for Serial ID.36MOD_DEF(0)Module Definition 0. Grounded within the module.37Rate SelectNo connection required 8LOSLoss of Signal indication. Logic 0 indicates normal operation.49VEERReceiver Ground (Common with Transmitter Ground)110VEERReceiver Ground (Common with Transmitter Ground)111VEERReceiver Ground (Common with Transmitter Ground)112RD-Receiver Inverted DATA out. AC Coupled 13RD+Receiver Non-inverted DATA out. AC Coupled 14VEERReceiver Ground (Common with Transmitter Ground)115VCCRReceiver Power Supply 16VCCTTransmitter Power Supply 17VEETTransmitter Ground (Common with Receiver Ground)118TD+Transmitter Non-Inverted DATA in. AC Coupled. 19TD-Transmitter Inverted DATA in. AC Coupled. 20VEETTransmitter Ground (Common with Receiver Ground)1 Key FeaturesSM100GSA-20 Copper Small Form Pluggable(SFP) transceivers are based on the SFP Multi Source Agreement (MSA).They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.The 1000BASE-T uses the SFP's RX_LOS pin for link indication. If SFP's TX_DISABLE pin, PHY IC be reset.
