Buy Neewer Products online in Nigeria

NW-700 Professional Studio Broadcasting & Recording Condenser Microphone With Shock Mount

(1)Condenser Microphone: The condenser microphone has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal. Gold-sputtered diaphragm for accurate sound reproduction. Low noise, wide dynamic range and high sensitivity. Widely used in recording studios, radio, stage performances. Suitable especially for studios, recording studios, broadcasting stations, stage performances and computer in sound reinforcement or recording, to pick up voice or instruments, indoors or outdoors. Fashionable design. Noble and elegant appearance.Sturdy and durable. Specification: Microphone-core: Dia.16mm Polar Pattern: Cardioid Frequency Response: 20Hz-16kHz Sensitivity: -38dB?a2dB(0dB=1V/Pa at 1kHz) Output Impedance:150-a30%(at 1kHz) Load Impedance: ?Y1000 -? Equivalent Noise Level: 16dBA Max.SPL:132dB S/N Ratio:78dB Electrical Current: 3mA Voltage:1.5V Battery Body Weight: 11oz/316g Color: Black Material: Metal Note: Don't drop, hit or apply strong shock to it. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures. (1)Metal Mic Shock Mount: This is a very nice shock mount for most large diaphragm condenser microphone. Isolate most studio condenser mics from physical vibration, floor, and stand noise. (1)Ball-type Anti-wind Foam Cap: Reduce the occurrence of wind, breath sounds and popping noises. Keep your microphone clean and help extend it's lifetime. (1)Power Cable: Length: Approx. 2.5m/8.2feet Key FeaturesThe Set Includes: (1)Black NW-700 Professional Condenser Microphone + (1)Metal Microphone Shock Mount + (1)Ball-type Anti-wind Foam Cap + (1)Microphone Power Cable. The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source. The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit. The set can be used for karaoke, in sound reinforcement or recording, to pick up voice or instruments, indoors or outdoors.

58MM 0.43x Professional HD Wide Angle Lens (Macro Portion) For Canon EOS Rebel 77D T7i T6s T6i T6 T5i T5 T4i T3i T3 SL1 1100D 700D 650D 600D 550D 300D 100D 60D 7D 70D

2-in-1 Design Wide angle lens and Macro Lens:Compatible with Canon Rebel (T5i T4i T3i T3 T2i T1i XT XTi XSi SL1), Canon EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM.Wide angle lens can provide maximum light and image transmission with maximize day and night shots and add the power of your camera's zoom.Macro lens gives you the ability to take close-up pictures of very small objects, which can highlight interesting details and textures of your subjectThe included filters are made of HD optical glass for high definition optical resolution, which can minimize reflections and lens flare.Ideal for long-distance photo situations such as sporting events, candid portrait shots, nature and wildlife photographyPackage Contents:1 x 58MM 0.43X HD Wide Angle Lens with Macro PortionKey FeaturesNOTE: This conversion lens is compatible with 58MM lenses only. Please verify your camera's lens thread size before ordering. Your camera's lens thread size is marked with a " & Phi;" (diameter) symbol. Camera lens is not includedCOMPATIBILITY: Compatible with Canon Rebel (T5i T4i T3i T3 T2i T1i XT XTi XSi SL1), Canon EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM2-IN-1 DESIGN LENS: 0.43X HD wide angle lens can provide maximum light and image transmission with maximize day and night shots and add the power of your camera's zoom. Macro lens gives you the ability to take close-up pictures of very small objects, which can highlight interesting details and textures of your subjectPREMIUM MATERIAL: Made of HD optical glass for high definition optical resolution, can minimize reflections and lens flareWIDELY USE: Ideal for shooting larger scenes and subtle objects, such as architecture, landscape, flowers, insects, etc.

CM14 Mic Phone Mic On Camera Video Microphone For Iphone Samsung Xiaomi Huawei & Camera

Description: Note: Earphone adapter is required when connecting to iPhone, android and other smart phones.(lightning to 3.5mm for iPhone). Neewer CM14 cardioid microphone is specifically designed for improving audio on smartphone videos, and any camera with a built-in microphone. Included TRS and TRRS cable is perfect for smartphones, cameras, camcorders, audio recorders, PC's, and some other audio/video recording devices. Small and strong design makes for a lightweight and durable microphone, doesn't weigh anything down while shooting. Plug and play with most devices. Included shock mount effectively reduces vibration noise. Fur wind shield helps reduce wind and white noise, making it great for outdoor recording and increased recording quality. Optimal recording distance is 0.5-1m / 20-39in. Specifications: Model: CM14 Directionality: Uni-directional Sensitivity: -44±2K & Omega; Impedance: Max. 0.68 K & Omega; Signal-to-Noise Ratio: 66 dB Max. Input Sound Pressure Level: 110 dB Total Harmonic Distortion (THD): ≤3% Standard Operating Voltage: 1.5 Vdc Operating Voltage Range: 1.0-10.0 Vdc Decrease Voltage Characteristics (Vs=1.5 to 1.0 Vdc): Max. 3 dB Current Consumption: Max. 500μA Size: 84x20mm (Length x Diameter) Audio Cables: 3.5mm to TRS audio output cable is for DSLR, Camcorder, or Recorder Audio Cables: 3.5mm to TRRS audio output cable is for Smartphone, Tablets, and Mac Package Contents: 1 x CM14 Microphone 1 x Fur Windshield 1 x Foam Windscreen cover 1 x Shock Mount 2 x Audio Cables 1 x User Manual Key FeaturesNote: Smartphone, DSLR camera, Camcorder or Recorder are all NOT included Professionally designed CM14 microphone is perfect for enhancing the audio from any integrated recording device. Included fur wind screen and anti-shock mount effectively eliminate background noise and vibration Optimal recording distance is 0.5-1m / 20-39in Perfect for filming Youtube videos, phone streaming, personal phone videos, live music, and outdoor events Compatible with a wide variety of devices including iPhone, Android, DSLR cameras, camcorders, Audio recorders, Tablets, and laptops. Note: Earphone adapter is required when connecting to iPhone, android and other smart phones.(lightning to 3.5mm for iPhone)

Professional Aluminum Alloy Quick Release Plate Adapter With 1/4 3/8 Inches Screw For DSLR Camera Camcorder Tripod Monopod, Compatible For Manfrotto 501HDV 503HDV 701HDV 577/519/561/Q5

This Neewer Quick Release Plate Adapter makes your camera attaching tripod monopod safely and quickly.With red safety pin prevent sliding accidently which can keep your camera camcorder safe.With bubble level to help indicate how much of your slanting.Rubber mat on surface prevent wearing of camera.Locking knob makes quick release plate more stable and prevent loosing and sliding.Holes in the adapter plate enable more connecting possibilities.Specification:Material: Aluminum Alloy1/4" and 3/8" screwPackage Content:1 x Quick Release Adapter1 x Quick Release PlateKey FeaturesWith red safety pin prevent sliding accidently which can keep your camera camcorder safeWith bubble level to help indicate how much of your slantingRubber mat on surface prevent wearing of camera, compatible for Manfrotto 501HDV 503HDV 701HDV 577/519/561/Q5Locking knob makes quick release plate more stable and prevent loosing and slidingHoles in the adapter plate enable more connecting possibilities

FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Flash/Studio Flash Trigger With Remote Shutter For Canon Rebel T3 XS T4i T3i T2i T1i Xsi EOS 1100D 1000D 700D 650D 600D 60D 550D 500D 450D 100D, EOS 1D Mark IV 1D Mark III 5D Mark III 5D Mark II 50D 40D 30

- Neewer Wireless Flash Trigger for Canon- The Neewer Photo wireless flash trigger receiver and transmitter can serve you in a multitude of functions.- To use this set as a wireless remote control, plug in the included C-Cable to both the receiver and your camera's compatible input. Make sure the receiver's and the transmitter's switches are set to ""CAMERA"" mode and then use the transmitter to wirelessly autofocus and take pictures.- Similarly you can employ a wired remote method simply by plugging in the C-Cable to the transmitter alone and proceeding to use this without the receiver.- Finally, if you wish to use this pack for wireless flash / studio flash triggering purposes, first attach the transmitter to your camera's hot shoe mount. Attach your flash to the hot shoe mount of the receiver and make sure the switches are set to ""FLASH"" mode and you can proceed to position the flash however you desire and take photos normally.- Features:- Frequency: 2.4Ghz- Operating Distance: up to 100m.- 16 Selectable Channels.- 1/4" Tripod Mount.- Sync Speed: 1/250 second.- Power Supply: 2x alkaline AAA batteries- Package Contents:- 1X Transmitter- 1X Receiver- 1X C1 camera cable- 1X C3 camera cable- 1X Flash Sync Cable- 1X PC Sync Cord- 1X Sync Adapter- 1X Manual InstructionKey FeaturesWireless Frequency System: 2.4GHzOperating Distance: up to 100meters16 Selectable ChannelsAlso Compatible with: Pentax K200 K110D Super, K110D, K100D, K20D, K10D, K-7, K-5, Kr, Kx, Mz-6, Mz-LIncludes: Wireless Camera Flash Trigger and Camera Remote Control Function (1 Transmitter, 1 Receiver) + C1 camera cable + C3 camera cable + Flash Sync Cable + PC Sync Cord + Sync Adapter

9 X 13 Feet/2.8 X 4 Meters Photography Background Photo Video Studio Fabric Backdrop Background Screen

Great to use with this backdrop in photo studio professional portrait video shooting or for amateur for creative production at home studio, such as making tutorials video on Instagram or on your YouTube channel.Made of premium fabric material, it has good vertical sense and is durable for long time use.Durable and anti-wrinkle in single piece seamless design with consistent black color.Thick and with the best possible balance of weight for you to easy holding, storing and carrying.Ideal to use with a background support system indoor for product, portrait, video shootingSpecifications:Dimension: 9 x 13 feet/2.8 x 4 metersMaterial: FabricPackage Contents:1 x Photography Studio Backdrop (Black)Key FeaturesPACKAGE INCLUDES: (1)2.8 x 4 meters Backdrop (Black); Note: Only backdrop is includedCONVENIENT: Designed with the best possible balance of weight for more easy handling for the photographer; Easier to set up or fold up for storingWIDE APPLICATION: Large enough to do full body shots; Ideal for using in portrait, space video or educational video shooting, beauty tutorials, interview setting, broadcast, film making, etc.DURABLE: Made of fabric material in single piece seamless design with consistent color; Thick and not transparent; Simply dust off the surface for cycling useANTI-WRINKLE: Come with reflective and none gloss surface; Ideal to use with a background support system indoor for product, portrait, video shooting

Neewer® 7 Feet / 210cm Photography Photo Studio Light Stands For Video, Portrait, And Photography Lighting

The light stand is made of aluminum alloy, making it strong for heavy duty work.It is also of light weight and can be folded into a small size, making it portable and easy to store after use. Its solid locking capabilities makes your lights safe.Made by the industrial standard, it supports all major brands of photo equipment such as reflector, softbox, different lights, background, etc.Height is adjustable from 72cm to 210cm / 28.3" to 83". Max load of 5.51 lbs / 2.5kg.It is perfect for photo studio and on site photo and video shoots!Specifications:Folded Height (approx.): 2.36 ft / 28.3" / 72cmMaximum Height (approx.): 7ft / 83" /210cmMax. Load Capacity (approx.): 5.51 lbs/2.5kgSpigot: 1/4 (need adapter to convert to 3/8)Tube Diameter: 16mmSegments: 3Note: Light stand only, strobe light not includedPackage Contents:1 * 7ft / 84" Light StandKey FeaturesThe light stand is made of aluminum alloy, making it strong for heavy duty work.Made by the industrial standard, it supports all major brands of photo equipment such as reflector, softbox, different lights, background, etc.Height is adjustable from 72cm to 210cm / 28.3" to 83".? Max load of 5.51 lbs / 2.5kg.It is perfect for photo studio and on site photo and video shoots!

Neewer® Portable Studio Photography Background And Reflector Disc Holder Clip

Neewer Portable Studio Photography Background and Reflector Disc Holder ClipThis handy tool specially designed for backgrounds and reflectors allows you to place your light shaping gear on any stand you want.Especially useful for photographers who work alone and need help supporting a reflector disc backdrop background.Material: Alunimum alloy with satin silver finishWeight: 2.35 ounces/ 67 gramsPackage Size: 3.5 x 2.8 x 1.6 inches/ 9 x 7 x 4 centimetersPackage comes with a reflector holder clips. Note: The reflector and light stand are not included.Constructed of aluminum alloy for durability. The sleek and lightweight design fits neatly into carrying bag, making it portable for outdoor events.Simple to use. Just attach the reflector to the stand via the reflector holder and position as needed.Just push back the spring-loaded clip to securely clamp it onto the edge of your reflector. The finger tabs allow you to open the jaw with one hand so that your other hand is free to adjust and position the backdrop.Key FeaturesPerfect for positioning your reflectorsGreat to use without an assistantEasy to assembleSimple to use. Just attach the reflector to the stand via the reflector holder and position as neededMade from aluminum alloy with satin silver finish

IR Wireless Shutter Release Remote Control For Canon EOS 60D 70D 7D Rebel T5i, T4i, T3i, T2i, T1i, XSi, Xti, XT, SL1 / 700D 650D 600D 550D 500D 450D 400D 350D 100D

This remote control acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera. It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device. It is ideal for taking pictures of subjects that are difficult to approach, or to minimize vibration for close-up and time exposure. Compatible with EOS 5D Mark II, EOS 7D, Eos 60D, EOS Rebel T1i / 500D, EOS Rebel T2i / 550D, EOS Rebel T3i / 600D, EOS Rebel T4i / 650D, EOS Rebel XSi / 450D, EOS Rebel XSi / 450D, EOS Rebel XT / 350D, EOS Rebel / 300D and any other canon models which support remote control mode.Key FeaturesIR Wireless RC-6 Remote Control for Canon EOS 500D/550Dself-timer functioneffective distance up to 5 meters awaydelay shooting switch up to 2 seconds

Photography Photo Studio 50cm / 20inch Aluminum Mini Table Top Backlight Stand (1 Stand)

This high-quality light stand is the perfect item for the professional studio use. Professional Backlight Stand For Studio or Location Shoots.Great for table top and background lights, fill lights. Package content1x 50CM Mini Light standKey FeaturesMaterial: AluminumMax height: 5cm/2inMax. Load: 2kgWeight: 12.23ozEasy way to set up, quick release and lock system fitted for the fast and easy used

Vertical Camera Battery Grip Hold 2x LP-E10 For Canon EOS 1100D 1200D 1300D / Rebel T3 T5 T6

This Battery Grip for Canon EOS 1100D / 1200D / 1300D /Rebel T3 / T5 / T6 makes photographing in a vertical position much easier and provides a better handling of your camera especially when you are using heavy lenses. The battery grip provides more energy for your camera than a normal storage battery would. The battery compartment holds either one or two lithium batteries.*High quality product with big discount from the one.*Can shoot approx. 3500 in room temperature without flash shooting, or approx. 1800 in room temperature with 50% flash shooting.*Power switch: Camera's power switch.*Dimensions: 16 x 13 x 8cm approx.*Weight: 7.75 oz approx.Package Contents:1x Battery Grip For Canon EOS 1100D 1200D 1300D1x Connection cable1x User Manual (in English)Key Featurespro battery grip for Canon EOS 1100D / 1200D/ Rebel T3/ Rebel T5 .Hold up to 2 LP-E10 Li-ion batteries.Vertical shutter with half-press function. More comfortable vertical shooting.Doubling the battery capacity of your camera, effectively extend your shooting time.Also has a Tripod Socket.

49MM Lens Filter Kit:UV Filter+CPL Filter+ND4 Filter+Filter Pouch+Cleaning Cloth For Sony Alpha NEX Cameras With 18-55MM,55-210MM,50MM,16MM,30MM Lenses And Canon EF 50MM F/.1.8 STM Lens

49mm FiltersCompatible with Sony Alpha the NEX series (NEX-3 NEX-5 NEX-5N NEX-6 NEX-7 NEX-F3) cameras with the 18-55mm, 55-210mm, 50mm, 16mm, 30mm lenses and Canon EF 50mm f/.1.8 STM Lens and other Camera lens with 49MM filter threadUV filterUsed to reduce UV rays from entering the lens and striking the film.Modern lenses often have UV protection built into them as well as digital sensors, however, UV filters are commonly used to help protect the surface of the lens from scratches, smudges, dirt and other hazards.CPL filterDifferent than most filters in that it is composed of two pieces of glass, mounted independently inside a round frame so that one can be rotated relative to the other.As it is rotated, it increasingly cuts out glare and haze. With an SLR, you can actually observe this change through the viewfinder.ND4 filterThe purpose of standard photographic neutral density filters is to allow the photographer greater flexibility to change the aperture or exposure time, allowing for more control, particularly in extreme circumstances such as on a very bright day.Filter Carrying PouchProtect and organize your filters.Cleaning Cloth:Made of premium materials.Extremely fine microfibers leave zero scratches, streaks or marks.Safe for all lenses, LED screens, tablets and smartphones.Package Contents:1 x UV Filter1 x CPL Filter1 x ND4 Filter1 x Filter Carrying Pouch1 x Cleaning ClothKey FeaturesKit includes: 49MM Filters (UV + CPL + ND4) + Filter Carrying Pouch + Cleaning ClothCompatible with Sony Alpha the NEX series (NEX-3 NEX-5 NEX-5N NEX-6 NEX-7 NEX-F3) cameras with the 18-55mm, 55-210mm, 50mm, 16mm, 30mm lenses and Canon EF 50mm f/.1.8 STM Lens and other Camera lens with 49MM filter threadUV filter reduces haze and improve contrast by minimizing the amount of ultraviolet light. Especially useful in areas of high altitude or snow, eliminating the undesirable blue cast.CPL filter is great for removing unwanted reflections from non-metallic surfaces such as glass or water. You can also use a polarizer filter to darken blue skiesND4 filter reduce the amount of light reaching the film without affecting the color. Can be used to enable slower shutter speeds. Also can be used to better separate subjects from the background by allowing wider apertures, effectively decreasing depth of field. Great for portraiture and outdoor sceneNOTE: 49mm Filters are compatible with all 49mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. ONLY Filters, Pouch and Cleaning Cloth are Included.

11.8 Inch X 10.6 Inch/30cm X 27cm Wooden Director's Film Movie Slateboard Clapper Board

Features:Material: wood, quality safe and environmental-friendly.Color: White and blackSize ( L x W ): Approx. 12 inches X 11 inchesEngraved lettering for longevityBolts in sticks can be adjusted if neededWooden-made Clapboard, it will be easy to erase without leaving any marks.Built-in magnetic strip provide a stable closure and can make a crisp sound when using this product..It can be used in recording film production, shooting ads, playing a drama, making a film, etc.Package Contents:1 x ClapperboardKey FeaturesIt can record film production, director, scene, take, roll and date.It can record film production, director, scene, take, roll and date.It can record film production, director, scene, take, roll and date.It can record film production, director, scene, take, roll and date.It can record film production, director, scene, take, roll and date.It can record film production, director, scene, take, roll and date.Size ( L x W ): Approx. 11.8 inch X 10.6 inchMaterial: wood, quality safe and environmental-friendly.Color: White and black

AC-PW20 AC Power Supply Adapter And DC Coupler Dummy Battery Charger Kit Replace NP-FW50 Battery Compatible With Sony A7/7R/7S A7II/7RII/7SII A6500/6400/6300/6100 NEX3/5/6/7 DSC-RX10 II III IV

Compatible Camera Models: SONY A7 A7R A7S A7II A7RII A7SII A6500 A6400 A6300 A6100 A6000 A5100 A5000 A3000 NEX-5 NEX-7 NEX-3N NEX-5N NEX-5R NEX-5T NEX-6 NEX-C3 NEX5C DSC-RX10 II III IV, SLT-A33, SLT-A35, SLT-A37, SLT-A55, ILCE-QX1, ILCE-QX1L etc.We use the Newest Smart and Intelligent technique to make sure your device safe.Specifications:Power: 24WInput: 100V-120V 50/60Hz 1A MaxOutput: DC 8V/3APackage Contents:1 x PW20 DC Coupler Dummy Battery1 x AC/DC Adapter1 x US Plug Power CordKey FeaturesCompatibility: Compatible with Sony A7 A7R A7S A7II A7RII A7SII A6500 A6400 A6300 A6100 A6000 A5100 A5000 A3000 NEX3 NEX5 NEX6 NEX7 DSC-RX10 II III IV and etcFunction: This AC-PW20 AC Power Adapter can offer continuous power to your camera from the AC outlet, you never need to charge and replace the batteries when you're taking long time studio shooting, downloading and viewing videos, pictures while connected to your TV or VCRSafe Use: Built-in fully decoded protective circuit; Built-in protection of high-power booster overvoltage, overcurrent and short circuit. UL PSE IC RCM CE FCC GS RoHS approval and certificationInput Voltage: 100-120 Volts 50-60Hz, Power Output: DC 8V/3A 24WPacking Contents:: 1 x PW20 Dummy Battery + 1 x AC/DC Adapter + 1 x Power Cord

Microphone Stand, Table Suspension Boom Scissor Arm Stand With 3/8 Inch 1/4 Inch To 5/8 Inch Screw, Shock Mount, Pop Filter, Microphone Clip, Cable Ties, Compatible With Blue Yeti/QuadCast/Logitech Webcam

Please measure the thickness of your desktop (less than 5cm).Please confirm your microphone diameter before ordering: plastic microphone clip - diameter: 46-52 mm - shock absorber bracket maximum diameter: 5.2 cm Maximum load: 1 kg.explain:The NEEWER enhanced microphone bracket is made of metal, with double tension arms and powerful springs, which can be used under different conditions. The more durable quality can guarantee a longer service life.By improving the design, the needs of studios and other professional users can be met. The length of single shear arm is 35cm.The scissor arm is equipped with a flexible suspension bracket, which can be rotated in different directions to meet your needs.Microphone feet are easy to install, lift, reposition, and move from one position to another.Soft desk stand prevents scratches.Compatible with high-performance microphones (Blue Yeti Snowball Microphones, Blue Yeti Nano Microphones, etc.) and some other standard size and partially capacitive handheld microphones.It is very suitable for home, stage and studio, podcast, conference, video, conference, program, TV channel, etc.Technical features:Material (shock absorber and boom): iron.Material (microphone clip): plastic.Weight: 0.16 kg.Maximum. Maximum load: 1 kg.Length of each arm: 35cm.Microphone clamp diameter: 46-52mm.Maximum damper diameter: 5.2cmMaximum. Clamp thickness: 5cm.Content:1 foot NW-35 Pro microphone.1 micro pop filter.1 Shock absorber bracket.3 Cable clamp.1 Bench clamp bracket.One 3/8 "plug to 5/8" inner nut.1 Foam cover.1 ribbon.1 microphone clip.Key Features[Flexible and durable] The Neewer arrow arm provides 360 ° rotation and 180 ° vertical/horizontal movement to obtain the best position. The sturdy steel structure ensures the bearing capacity of up to 2 kg - very suitable for singing, podcasting, live broadcast and video games.Desktop clip: The lightweight C-clip can be installed on a 5.3 cm (2 inches) thick desktop, and keep your desktop clean and tidy. Internal rubber pad protects the desktop from scratches and improves stability[Shock absorber bracket and Pop filter] The shock absorber bracket can be installed on a microphone with a diameter of 5.2 cm (2.05 inches) and minimize vibration noise to obtain clear sound output.

Pro Microphone Isolation Shield, 5-Panel Pop Filter, High Density Absorbent Foam Front & Vented Metal Back Plate, Compatible With Blue Yeti And Any Condenser Microphone Recording Equipment

This acoustic shield features an acoustic foam front and vented metal back plates, which allows the microphone to "breathe" and prevents reflections within the arc of the shield. 4 outer panels can be folded inward for storage or for angle adjustment to create a tighter acoustic isolation chamber to help you achieve a more crisp and clean sound when recording.Unwanted outside audio waves and vibrations, also known as noise and interference are shielded away from the recording area while your voice finds a clear path to your microphone.It can be fixed on counter top or tabletop, and also can be mounted to a microphone stand.Suitable for professional recording studio music recording, film recording and other production; music studios, bands, personal live broadcast, recording, singing, etc.Specifications:Dimensions (Fully Extended): 23x11x2inches /59x28x5centimetersDimensions (Folded): 12x12x7.5inches/31x31x19centimetersDimensions (Single Panel): 11x4.5inches/28x11.5centimetersMic Isolation Shield Weight: 3 lbs/1.39 kilogramsSound Absorbing Foam Thickness: 1.57inches/4centimetersMaterial: Foam, MetalColor: BlackPackage Contents:1x 5-Panel Foldable Mic Isolation Shield1x Connecting rod with Thread2x Nut1x 3/8" Male to 5/8" Female Threaded Screw Adapter (Black)1x 3/8" Female to 5/8" Male Threaded Screw Adapter (Gold)Key FeaturesPRO DESIGN: Made of vented metal back outer plate and an inner acoustic-foam front. 2-layer design can effectively diffuse acoustic waves surrounding the microphone and keep the sound from bouncing back towards the microphone, impart near-zero sonic coloration to your tracks, controlling reflected soundwaves; NOTE: The package only contains a mic isolation shield and adapters. It does not include any stand, headphones, shock mount and microphoneVERSATILITY: The tri-fold microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand (microphone and stand need to be purchased separately)FOLDABLE AND PORTABLE: 5 panels design features 4 foldable end panels to allow for angle adjustments, maximizing the absorption of noise; Compact design, lightweight construction as well as foldability allow you to carry it easily and take along wherever you go. Mic Shield Weight is 3 lbs/1.39 kilogramsTHICK SOUND-ABSORBING FOAM: The inner side of the microphone isolation shield is made of absorbing foam that can reduce sound reflection when recording; Foam Thickness: 1.57inches/4 centimetersDURABILITY: Constructed of premium steel with premium screws to ensure sturdiness, and long lasting performance. Fully Extended Dimensions: 23x11x2 inches/59x28x5 centimeters

Adjustable Microphone Suspension Boom Scissor Arm Stand, Compact Mic Stand Made Of Durable Steel For Radio Broadcasting Studio, Voice-Over Sound Studio, Stages, And TV Stations

Microphone Scissor Arm Stand (BLACK) + Table Mounting Clamp (BLACK):The double-braced arms add strength. Extend up to Approx.31.5"/80cmMax load: Approx 1KGMaterial: SteelColor: BlackIdeal for radio broadcasting studio, voice-over sound studio, stages, and TV stations, etc. YOU CAN NOT MISS IT!The Scissor Arm Stand is equipped with super-strong spring so that it can stand much more weight.Your microphone is held safely and firmly on this scissor arm microphone clip.Standard Microphone Clip (PLASTIC/BLACK):A standard microphone clip to mount most standard-sized handheld microphone.Package Contents:1x Black Microphone Scissor Arm Stand1x Black Table Mounting Clamp1x Black Microphone ClipKey FeaturesPLEASE NOTE: Max. Microphone Clip Diameter is 1.26″/32mm and Max. load is approx 1 kilogram; Microphone and Filter Shield NOT Included; The Stand is NOT Suitable for Blue Yeti USB MicrophoneThe adjustable Black Scissor Arm Stand is made of high quality steel frame, plastic Mic Clip (INCLUDED), sturdy and durable.Folding type, convenient to carry. The adjustable arms allow you to carry it with you easily and adjust the suitable angle and height to show your perfect voice.Can be mounted on the announcers' table with the Table Mounting Clamp(INCLUDED).Compact microphone stand designed for heavy duty carry. Suitable for any stores, families, stages, studios, broadcasting and TV stations, etc. Completely flexible, firmly attach the microphone anywhere. Please Note: Kindly refer the Instructional Video before use which is very essential.

Telescope, 12X50 HD With Smartphone Holder And Tripod

NOTE: 1. Always put on the lens caps when yours is not in use. If you don't, dirt and dust could eventually damage the lenses, and they cannot be replaced. 2. Clean lenses with cotton pads or a soft cloth. Don't use paper towels, as the texture could scratch the lens coating. 3. If you want adapter for iPhone X, you need use phone adapter target the below camera.Description :It can fits in a pocket easily, making it convenient to carry around, and is simple to use.The 12x magnification allow you can see 12x closer with a clearer and brightest image. Perfect for outdoor activities such as climbing, hiking, driving, watching wildlife and scenery.It comprises of high quality electronics and optics. It utilizes the 50mm FMC green film objective lens and BAK4 prism, providing outstanding image quality. It enable you observe target in totally dark condition. You can enjoy the beauty of the distance with large field of view (360ft/1000Yds). During the day or low light, observation distance is infinite.Ergonomic design gives you more comfortable while using. And the compact size ensures you can hold it tightly by one hand.It is compatible with different types of mobile phones, which is convenient for you to choose.Specifications :Magnification: 12x (fixed at 12x, not adjustable)Objective lens: 50mmPrism Type: BAK-4Lens coating: FMCObjective lens coating: FMCPrism system: BAK4 PrismField of view: 360ft/1000ydsWeight: 0.61 poundsPackage Contents:1 x 12x50mm Telescope1 x Lens Cover1 x Tripod Stand1 x Cellphone Clamp1 x Carry Bag1x Cleaning Cloth

6'' X 5''/15 Cm X 12.5 Cm Translucent Softbox Compatible With Canon, Nikon, Godox, Yongnuo, Neewer TT560 NW550 NW561 NW570 NW580 NW625 NW635 NW-670 750II NW645 NW655 Speedlite Flashes

By diffusing the flash, the softbox creates an even lighting that allows you to capture picture-perfect shotsConverts the harsh light from flash to a softer, diffused light, while reducing shadows and softening hot spotsSimply unfold the diffuser and attach the fastening tapes front, and you're ready to goStretch opening allows you to connect the diffuser to most shoe mount flashes

Phone Holder Hot Shoe Mount Adapter For Camera Hero 10 9 8 7 6 IPhone Samsung

Neewer Phone Holder / Hot Shoe Mount Adapter Kit Compatible with Action Camera Hero 10 9 8 7 6 5, OSMO Action, iPhone12/11 Pro Max/X/XR, Samsung, Attaching on DSLR Camera or Ring LightTake a picture with your DSLR Camera and ring light and also record with your smartphone at the same time.Easy to use, no tools needed and can be installed in less than a minute.A good mounting solution for Android & IOS DSLR controller appPackage Contents: 1x Hot Shoe Mount (with 1/4" Tripod Thread); 1x Mount (with Tripod Connection); 1x Mount Adapter (with 1/4" Tripod Thread); 1x Universal Phone Holder (with Tripod Connection); 1x Large ThumbscrewNote:Cellphone, DSLR camera and Ring Light are NOT included

USB Microphone Kit 192KHZ/24BIT Plug&Play Computer Cardioid Mic Podcast Condenser Microphone With Professional Sound Chipset For PC Karaoke/YouTube/Gaming Record, Arm Stand/Shock Mount (Blue)（NW-8000-USB）

NOTE 1: The Microphone only works with the device that could provide enough power (Voltage Required: 5V).NOTE 2: The microphone is compatible with most Laptop (Windows7 and above, Mac OSX 10.9 and above).NOTE 3: Max. Table Mount Clamp Opening is 1.85 inches.NOTE 4: The microphone does not suitable for PS4/5, Xbox and other game machines.Description:With a good cardioid polar pickup pattern, high output and low self-noise function, the microphone can accurately reproduce even the most subtle sound. It is suitable especially for studios, recording, broadcasting, meeting and gaming etc.Plug-and-Play, no need to install any driver or sound card; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations, wherever you need a mic to voice call from home or you need to record outdoors on your computer.USB 2.0 date port which is easy to connect with your computer and Linux operation system with no drivers and sound card required.With the 16mm electret condenser transducer, the USB microphone can give you a strong bass response.The Pop filter makes sure your message loud and clear, and banish the dreaded hissing and lisping sounds.NW-35 adjustable microphone scissor arm stand is made of quality metal frame. Sturdy and durable. Each Arm Length: 14 inches/35 centimetersSpecifications:192KHz/24Bit Condensor USB MicrophoneVoltage Required: 5V USBPolar Pattern: CardioidMicrophone-core: Dia.16mm CondenserUSB Cable Length: 78.7 inches/200 centimetersSampling Rate: 192kHz/24bitSensitivity: 5.0mV (1V/Pa at 1KHz)Frequency Response: 20Hz-20kHzSNR: 98dBCompatibility: WINDOWS7 and above, OSX 10.9 abovePackage Contents:1x 192kHz/24Bit USB Condenser Microphone (Blue)1x Mic Windscreen Foam Cap1x Metal Shock Mount1x USB Cable1x Pop Filter1x Scissor Arm StandKey FeaturesPACKING LIST: USB Condenser Mic (Blue) + NW-35 Suspension Boom Scissor Arm Stand + Metal Shock Mount + Mic Windscreen Foam Cap + Pop Filter + Table Mounting Clamp + USB-B to USB-A Cable; Compatible with most Laptop and PC (WINDOWS7 and above, OSX 10.9 above). Strong output, no distortion, low power consumption; NOTE: The Condenser Microphone only works with the device that could provide enough power (Voltage required: 5V)PROFESSIONAL SOUND CHIPSET 192kHz/24bit: This Condenser Microphone has been designed with professional sound chipset, which makes the USB microphone hold high resolution sampling rate. SAMPLING RATE: 192kHz/24bit. Smooth, flat frequency response of 30Hz-16kHz: Extended frequency response is excellent for singing, speech and voice over. Performed perfectly in reproduces sound, high quality mic ensure your exquisite sound reproduces on the internetPLUG AND PLAY: The microphone has USB 2.0 data port which is easy to connect with your computer and Linux operation system, and no need extra driver software or an external sound card. Double shielding USB cable reduces interference, minimizes background noise and isolates the main sound source; Ideal choice for vocal, instruments, podcast, personal recordings and familiar situations16mm ELECTRET CONDENSER TRANSDUCER & MAGNET RING: With the 16mm electret condenser transducer, the USB microphone can give you a strong bass response. This professional condenser mic picks up crystal clear audio. The magnet ring on the USB microphone cable has a strong anti-interference function, which makes you have a better feelSTURDY NW-35 BOOM ARM SET: With a pop filter and a foam windscreen, the condenser mic records your voice and the sound is crystal clear, the shock mount holds the microphone steady with damping function. Particularly good for video voiceovers; podcasts; YouTube video; skype conferences and so on. Max.capacity of the boom arm stand: 1 kilograms/ 2.2lbs

Neewer 12 Pairs (24 Gloves) 100% Cotton Lisle White Inspection Work Gloves For Coin, Jewelry, Silver, Or Photo Inspection

Note: Camera and Brush are Not included Description: 100% soft cotton One size fits most individuals Hemmed cuff edge prevents shredding or unravelling Thumb is sewn separately for best comfortable fit Color: White Meterial: Cotton Quantity: 12 Pairs (24 Gloves) Length: 8.66"/22cm Width: 5.91"/15cm Package Contents: 1 * 12-Pairs White Inspection Work GlovesKey Features100% soft cottonOne size fits most individualsHemmed cuff edge prevents shredding or unravellingThumb is sewn separately for best comfortable fitLength: 8.66"/22cm, Width: 5.91"/15cm

43 Inch Light Reflector 5-in-1 Collapsible With Bag

Neewer 43 Inch/110 cm Light Reflector 5-in-1 Collapsible Multi-Disc with Bag Translucent, Silver, Gold, White and Black for Studio and photography●Supplied with a carry bag to keep the reflectors in optimal condition between uses.●Each reflector has a particular effect which is reproduced in the photos by modifying the light in a particular way.●The reflector types in this kit are the most popular chosen by professional photographers on a regular basis.SpecificationsShape: RoundExpanded size: 43 inches (110 cm)Collapsed size: 15 inches (35 cm) roundFits any standard reflector holderProduct Dimensions: 16.2 x 1.6 x 15.4 inchesProduct Weight: 1.5 poundsShipping Weight: 1.7 poundsPackage includes:5 x 43 inches/110 cm Collapsible Disc Reflectors1 x Portable Carrying Bag2If you are new to using reflectors, each reflector has a particular effect which is reproduced in the photos by modifying the light in a particular way.SILVER - The silver reflector gives a better luminosity. Its metallic surface reflects the light whether this is produced naturally - such as by the sun, or artificially, by a studio lamp. It indirectly accentuates the light and the contrast without distorting the colors. This reflector is a good choice for still life, objects, and portraiture.GOLD - This reflector "warms up the image" and is recommended for still life, portraits, and model photography.WHITE- The white reflector bounces the light in order to create even, flattering results. The neutral surface softens the light and preserves natural color. It can also be used for macro photography.BLACK - If you want to add a dramatic effect to your images, this is the one for you! The black reflector creates dark effects by blocking unwanted light and eliminating light reflections.TRANSLUCENT - This reflector is perfectly adapted for soft light, eliminating shadows. It can be placed in front of a light source such as a studio lamp, spotlight, or the sun and diffuses direct light.Key FeaturesTranslucent surface for softeningSilver for the contrast you look forBlack to block out stray lightGold for warm tone and healthWhite to fill the shadow

TT560 Flash Speedlite For Canon Nikon Panasonic Olympus Pentax And Other DSLR Cameras，Digital Cameras With Standard Hot Shoe

Description: Power Management: Switch to the ON position, and the flash will start charging (the charging indicator is dim). After several seconds, the charging indicator turns red and TT560 is then ready to shoot. For a test flash, simply press the test button. If the red charging indicator lamp flickers, it indicates low battery. In such case, the power will turn off automatically and you need to replace the batteries. After use, turn power switch to OFF position. Power Control: The flash unit has 8 steps of power output control which indicated by 8 pieces of LED lamp for different level. Press ‘+' and ‘-‘ to raise and lower power:1/128,1/64,1/32,1/16,1/8,1/4,1/2,1/1 Specifications: Guide Number:38 ( ISO 100 ) Flash Mode: M, S1, S2 Vertical Rotation Angle :0~90 degrees Horizontal Rotation Angle: 0~270 degrees Power: 4xAAsize batteries ( Alkaline or Ni-MH are usable ) Light Quantity Output Control :with 1/8 - stop increment Color Temperature: 5600K Flash Duration :1/300s~1/20000s Dimensions :190*75*55mm Net Weight :286g Modes: In M Mode, you can set TT560 onto your camera hot shoe or speedlite trigger hot shoe to trigger the flash unit. When shooting, adjust the flash power and press the camera shutter, the flash light will flash under the camera synchronous signal. S1 Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for manual flash environment. When the flash is S1 mode, it will fire synchronously when the master flash fires, comparable with the effect by the use of radio trigger. S2 Mode is applicable for slave flash in order to create many lighting effects. It is respectively applicable for TTL flash environment. The flash unit won't flash synchronously with the first flash but the second flash from the master flash. Key FeaturesVertical Rotation Angle: 0~90 degrees, Horizontal Rotation Angle: 0~270 degrees; Note: Don't support TTL and the camera menu setting Function Compatible with for Canon Nikon Panasonic Olympus Pentax Fijifilm and Sony with Mi Hot Shoe cameras，like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500 (NOT compatible with Canon EOS Rebel SL3/250D，Rebel T7/1500D 2000D，Rebel T100/3000D 4000D） Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim) For a test flash, press the test button. After use, press the ON/OFF to OFF to power off. Red charging indicator lamp flickers in every 1s; it indicates low battery; The flash unit has 8 steps of power output control which indicated by 8 pieces of LED

Mini Metal Foldable Desktop Tabletop Tripod Microphone Mic Stand With Mic Clip Holder, Durable Iron Construction, 3/8-inch And 5/8-inch Threaded Mount For Meetings Lectures Podcasts Etc

Made out of premium steel body and plastic knob which is rustproof and uneasy to break or distort.Foldable design for ease of carrying and storing.The Mic clip is 180-degree adjustable, can be set to suitable angles as you need.Non-slip rubber feet of the tripod can protect your desk from scratches.Mini desktop tripod with clip is ideal for home, stage, and studio, podcasts, meetings, lectures, broadcasts and more.Specifications:Tripod Material: Iron & PlasticClip Material: PlasticTripod Weight: 187grams/ 6.6ozMic Clip Weight: 46 grams/ 1.6ozMic Clip Length: 10 centimeters/ 3.9inchesPackage Size: 8.5x6.5x25centimeter/ 3.3x2.6x9.8inchesPackage Weight: 290grams/ 10.2ozPackage Contents:1 x Mic Stand1 x 5/8-inchMale to 3/8-inch Female Screw1 x Mic ClipKey FeaturesAdjustable Height: 10-10.4 inches/25.5-26.5 centimeters; Weight: 187grams/ 6.6 ounces; Made out of premium steel body and plastic knob, rustproof and uneasy to break or distort. Note: The microphone is not includedFoldable design for ease of carrying and storing. Non-slip rubber feet to protect your desk from scratches, increase the frictionWith a 5/8 inches male to 3/8 inches female metal threaded screw for different mic clip. Mic clip is 180-degree adjustable, can be set to suitable angles as you needTripod design can give it exceptional strength. With a clutch knob to help you lock the stand, more stableIdeal for home, stage, and studio, podcasts, meetings, lectures, broadcasts and more

Studio Monitor Headphones - Dynamic Rotatable Headsets With 40mm Loudhailer Driver, 3 Meters Cable, 6.35mm Plug Adapter For PC, Cell Phones, TV (NW-2000)

This professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation. The pro-grade materials are durable, yet comfortable. Stainless steel slider with scale is easy to adjust distance. The function of 180-degree rotation ear cup can meet everyone's special listening methods. Lightweight and foldable design make it easy for carrying. Top grade soft leather headband and ear cushion enable a comfortable long time wearing. Specifications: Operating Principle: Closed Transducer Type: Dynamic Loudhailer Diameter: 40mm Impedance: 40 & Omega; Sensitivity: 98 3dB Frequency Response: 10Hz-26kHz Max. Power: 1800mW Rating Power: 300mW Cable Length: About 3 meters Plug: 3. 5mm+6. 35mm Net Weight: About 11 ounces/310 grams Package Contents: 1 x NW-2000 Monitor Headphone 1 x 3 meters Cable with 1/4 inches Plug 1 x 6. 35mm Male to 3. 5mm Female Plug AdapterKey FeaturesIMPRESSIVE SOUND QUALITY: Precise closed cavity structure; Newest designed 40mm large-aperture driver with rare earth magnets and copper-clad aluminum wire voice coils to provide wider dynamic range and make sure safe and stable output even meet instant high power; Circumaural design contours around the ears for excellent sound isolation in loud environmentsOMFORTABLE USE: Super soft memory foam cushions and leather material simulate human skin texture, ensuring lasting comfort; The softly padded headband allows you to find the perfect fit without constraint for long time wearingGREAT FLEXIBILITY: 180 degree rotatable earcups are easy for single ear monitoring; Stainless steel slider with scale is easy to adjust enough to find perfect comfort positionUNDETACHABLE CABLE: 3 meters undetachable Cable, 3. 5mm-6. 35mm adapter with durable screw-on plug are included to meet your needs on PC, Cell Phones, TV, etc; Perfect for music appreciating, watching movies, playing games, piano and personal recording, etc1 YEAR : Includes 1 year Neewer limited and Life-time e-mail Customer Support

Aluminum Alloy Camera Video Cage Film Movie Making Kit, With Top Handle, Dual Hand Grip, Two 15mm Rods, Compatible With Canon, Sony, Fujifilm, And Nikon DSLR Camera And Camcorder (Black + Red)

Neewer Aluminum Alloy Camera Video Cage Film Movie Making Kit (Red+Black)Note:Camera not included.Wide CompatibilityCompatible with Nikon, Pentax, Canon, and other DSLR cameras and camcorders.Convenient Mounting DesignA bottom 1/4” thumbscrew allows you to conveniently mount and dismount a camera or camcorder without any tool.Multiple Mounting OptionsMultiple 1/4” and 3/8” threaded holes enable you to mount a wide range of accessories for a complete filmmaking setup.Solid ConstructionThis cage is strong and durable with anodized aluminum alloy construction and high-precision CNC machining.SpecificationsMaterial: Aluminum alloy, siliconeColor: Black, redRod Diameter: 15mmRod Rail Gauge: 60mmPackage Contents:1 × Camera Video Cage;2 × 15mm Rod;1 × Rod Base;1 × Top Handle Grip;2 × Hex Keys;4 × 1/4” adapterKey Features【Wide Compatibility】 This Neewer universal camera cage is widely compatible with Canon (including 5D Mark II, 5D Mark III, 600D, 700D), Nikon (including 7200D), Sony, Fujifilm, Pentax, and other DSLR cameras and camcorders, ideal for photography enthusiasts, professional photographers, and filmmakers【Complete Accessories】 The camera cage has ergonomic dual handgrips for stable shootings. The silicone top handle can attach to the camera cage for taking low-angle shots. And the integrated dual-rod base with two rods 15mm in diameter and a 60mm rod rail gauge can let you adjust the camera positions and mount accessories like a follow focus, a hood, and a lens support【Convenient Mounting】 The camera cage features a built-in 1/4” thumbscrew that allows you to mount and dismount your camera quickly without tools. The silicone padding stabilizes your camera from wobbling and protects it from scratches【Multiple Mounting Points】 Multiple 1/4” and 3/8” threaded holes on the top of the cage allow for mounting several photographic accessories, including articulating arms, cold shoe mounts, field monitor mounts, and more【High-Quality Material】 With aircraft-grade aluminum alloy material, high-precision CNC machining, and an anodized finish, the camera cage is strong and durable

BG-E8 Replacement Battery Grip For Canon EOS 550D 600D 650D 700D / T2i T3i T4i T5i

Neewer BG-E8 Replacement Battery Grip for Canon EOS 550D/600D/650D/700D Rebel T2i/T3i/T4i/T5i SLR Camera,Works with 1 or 2 Pieces LP-E8 or 6 Pieces AA Batteries. Features Pro Battery Grip for Canon EOS 550D/600D/650D/700D Rebel T2i/T3i/T4i/T5i SLR Camera Hold 6 AA batteries or 2 LP-E8 Li-ion batteries. Vertical shutter with half-press function. More comfortable vertical shooting. Doubling the battery capacity of your camera, effectively extending your shooting time. Professional edition with vertical-grip shutter-release button, main dial, AE-L button, Index/Reduce button and Exposure button. Tripod screw mount. Same functions as the battery grip Canon BG-E8. High quality product with a big discount from the BG-E8 . package contents: 1 x Pro Battery Grip for Canon EOS 550D/600D/650D/700D Rebel T2i/T3i/T4i/T5i 1 x Battery Holder for 6 pcs AA batteries (battery not included) 1 x Battery Holder for 2 pcs LP-E8 batteries (battery not included) 1 x Manual Key FeaturesType: Battery grip for the CANON EOS 550D 600D 650D 700D / Rebel T2i T3i T4i T5i Can hold 2pcs LP-E8 batteried or 6pcs AA Batteries. Same function as Canon battery grip BG-E8. High quality product with big discount from the BG-E8 Professional edition with vertical-grip shutter-release button, main dial, AE-L button, Index/Reduce button and Exposure button.

20-in-1 Expansion Accessory Kit For Osmo Pocket Handheld Camera: Chest Strap, Bike Mount, Backpack Clip, Flexible Tripod, Car Suction Cup, Selfie Stick For Skiing Skating Running Bicycling

The accessories kit helps you take photos and videos with osmo pocket more convenience while skiing, skating, running, cycling, boating, diving, ice hockey, surfing, etc.Tripod mount, long screw and standard extension holder is for 1/4 screw. It is suitable for others 1/4 interface accessories effectively and help you mount more accessories on your Osmo pocket.The chest strap, surface J-Hook buckle and long screw can enable your to record and shoot more steadily on the chest.The 360 degree clip can rotate every angle to meet your need. It can easily clip or remove at the backpack or even your clothes while travelling or any other outdoor activities.The suction cup mount, tripod mount and long screw is powerful enough to any smooth surfaces firmly.The bike handlebar mount and long screw enables you to attach Osmo pocket firmly on bike handlebars, seat posts and more. Comes with pivoting orientation arms to allow for 3 -way adjustability, ensuring you to get the angle you want.There is a mini flexible tripod features small, lightweight and portable, so it is easy to store. It is suitable for all kind of camera, digital cameras, web cameras and camcorders.Package Contents:1x Car Suction cup1x 360-degree Rotation Backpack Clip1x Selfie Stick2x J-Hook3x Tripod Mount Adapter1x Bike Handlebar Seat Post Pole Mount2x Bike Handlebar Holder Mount Adapter1x Chest Strap1x Flexible Tripod4x Long Screws1x Wrench Tool1x Carrying Pouch1x Extension HolderKey FeaturesExtension Holder + Tripod Mount Adapter + Long Screw: Tripod mount with long screw and standard extension holder for 1/4 screw, suitable for others 1/4 interface accessories effectively, help you mount more accessories on your Osmo PocketChest Strap + Surface J-Hook Buckle + Long Screw: Chest strap with surface J-Hook buckle and long screw help your recording and shooting more steadily on the chest360 degree rotation Backpack Clip: The direction and the angle can meet users' needs. Easily clip or remove it at the backpack or even your clothes while travelling or any other outdoor activitiesSuction Cup + Tripod Mount Adapter+ Long Screw: Car suction cup mount with tripod mount and long screw, powerful enough to any smooth surfaces firmly, used in a car for you to record the beautiful scenery on the wayBicycle Handlebar Mount + Long Screw: Universal 1/4 screw, enable you to attach Osmo Pocket firmly on bike handlebars, seat posts and more

9 X 13 Feet/2.8 X 4 Meters Photography Background Photo Video Studio Fabric Backdrop Background Screen (Green)

Great to use with this backdrop in photo studio professional portrait video shooting or for amateur for creative production at home studio, such as making tutorials video on Instagram or on your YouTube channel.Made of premium fabric material, it has good vertical sense and is durable for long time use.Durable and anti-wrinkle in single piece seamless design with consistent green color.Thick and with the best possible balance of weight for you to easy holding, storing and carrying.Ideal to use with a background support system indoor for product, portrait, video shootingSpecifications:Dimension: 9 x 13 feet/2.8 x 4 metersMaterial: FabricPackage Contents:1 x Photography Studio Backdrop (Green)Key FeaturesPACKAGE INCLUDES: (1)2.8 x 4 meters Backdrop (Green); Note: Only backdrop is includedCONVENIENT: Designed with the best possible balance of weight for more easy handling for the photographer; Easier to set up or fold up for storingWIDE APPLICATION: Large enough to do full body shots; Ideal for using in portrait, space video or educational video shooting, beauty tutorials, interview setting, broadcast, film making, etc.DURABLE: Made of fabric material in single piece seamless design with consistent color; Thick and not transparent; Simply dust off the surface for cycling useANTI-WRINKLE: Come with reflective and none gloss surface; Ideal to use with a background support system indoor for product, portrait, video shooting

Dual Hand Grip For Neewer Crane M Zhiyun Crane M 3 Axis Hand Stabiliser Non-Slip Durable Camera Gimbal Space Aluminium Alloy Black

Made from aviation aluminium alloy: Lightweight and durable, it is also portable when disassembled. Please note: This handheld handle does not fit Crane 2.Specially designed for Zhiyun crane and Zhiyun crane M 3-axis hand stabiliser, you can switch from one hand to two hands when picking it up.Non-slip design: The dual handles are made of non-slip plastic with patterns to increase friction, you can hold it firmly without worrying about it failing due to permanent use.1/4" screw hole: Two 1/4 screws on the handle allow you to connect your monitor, Bluetooth remote or other accessories to your cameras

8-in-1 Accessory Kit For Gopro, Buckle Clip Basic Mount, Vertical Surface Quick Mounting J-Hook Buckle Mount, Long Thumb Screw For GoPro Hero 9 8 Max 7 6 5 AKASO APEMAN Campark SJCAM

Buckle Clip Base Mount and Surface J-Hook Buckle allow you to attach your GoPro camera to a chest Harness, Adhesive Mount.Easy operation, easy to install and remove.The J-Hook design means the camera is further away from its mounting point, therefore allowing additional angles to be achieved when filming.Specification:Color: BlackScrew Length: About 2.1 inches/5.3 centimetersMaterial: Buckle Clip Base Mount made of ABS plastic; Surface J-Hook Buckle made of polycarbonate; Screws made of ABS plastic and MetalCompatibility: Suitable for GoPro Hero Session/5 Hero 3 3+ 4 5 SJ4000 5000 6000 DBPOWER AKASO VicTsing APEMAN WiMiUS Rollei QUMOX Lightdow Campark Sony Sports DV and MorePackage Contents:3 x Buckle Clip Base Mounts2 x Surface J-Hook Buckle3 x Long Screws with CapKey FeaturesBuckle Clip Base Mount and Surface J-Hook Buckle: Allow you to attach your GoPro camera to a Chest Harness, Adhesive Mount; Easy operation, easy to install and removeJ-Hook Design for Additional Filming Angles: Its J-Hook design means the camera is further away from its mounting point, therefore allowing additional angles to be achieved when filmingCompatibility: Suitable for GoPro Hero Session/5 Hero 3 3+ 4 5 SJ4000 5000 6000 DBPOWER AKASO VicTsing APEMAN WiMiUS Rollei QUMOX Lightdow Campark Sony Sports DV and MoreDurable Material: Buckle Clip Base Mount made of ABS plastic; Surface J-Hook Buckle made of polycarbonate; Screws made of ABS plastic and Metal; Lightweight and durableKit includes: (3)Buckle Clip Base Mounts; (2)Surface J-Hook Buckle; (3)Long Screws with Cap

Neewer® 1 Yard X 60 Inch/0.9M X 1.5M Nylon Silk White Seamless Diffusion Fabric For Photography Softbox,Light Tent And Lighting Light Modifier

This fabric is coated with a non-yellowing white nylon translucent textile and is perfect for creating large diffusion panels and for the DIY tent builder.You can use this fabric for softboxes,light tents and diffusion panels and so on.This helps to decrease harsh shadows and reflections on shiny objects.Specifications:Single piece seamless designSize:1 Yard x 60 Inch/0.9M x 1.5MEffect:Light DiffusionMaterial:NylonColor:WhitePackage Contents:1 * 1 Yard x 60 Inch/0.9M x 1.5M Diffusion FabricKey Features1 Yard x 60 Inch/0.9M x 1.5M of DIY diffusion fabricMade from non-yellowing white nylon translucent textileLight reduction is about 1.0 f-stopSingle piece seamless design,lightweight and durable.Softening the light and eliminates reflections and shadows

Acrylic Plastic 10x8/25x20cm Dry Erase Director's Film Clapboard Cut Action Scene Clapper Board Slate With Color Sticks

The film clapboard is a production slate made of white acrylic and designed to be used with dry erase markers. A cost-effective production tool that's especially useful in sync sound productions--whether video, film, or dual-system DSLR--the slate comes with standard-size White/Black clapper sticks and has a writing surface of 9.8x 7.8"/25x20cm.Features:Organic(Acrylic) material and non-wood produced, easy to be written or cleaned. English version, beautiful and stable.Computer-graved and with printings non-lose.Built-in magnetic stripe, professional and resonant while being clapped.Clap-strip, special design and powerful enough to avoid crack.Specifications:Material: Built-in Magnetic strip + Organic(Acrylic) material Dimension: 9.8x 7.8"/25x20cmUsed for: Film, TV plays, Studio live, Advertisement, Video etc.Writing way: Use the high-quality felt pen or Marker pen, and erase it asap after usage.Note: don't use the greasy pen, otherwise it can't be erased.Package Contents:1x 9.8x 7.8"/25x20cm Film Clapboard (colorful)Key FeaturesOrganic(Acrylic) material and non-wood produced, easy to be written or cleaned.English version, beautiful and stable.Computer-graved and with printings non-lose.Built-in magnetic stripe, professional and resonant while being clapped.Clap-strip, special design and powerful enough to avoid crack

4-Pack Photography Sandbag Sand Bags Saddlebag Design 4 Weight Bags For Photo Video Studio Stand Backyard Outdoor Patio Sports, Transparent PP Bag And Clips Included (Black)

Neewer Photographic Sandbag for Light Stands, Boom Stand, Tripod - 4 PacksDescription:Sandbags are useful in the studio to help stabilize your lighting equipment. The balance of the weight is up to you, because you can change the weight of the sandbag to create angles of your photography.Specially come with 8 packs transparent PP bag, which can be filled with gravel, sand, rocks, or any other material to add weight and then put them into the sandbag, which can effectively prevent the sands leaking out, also make the sandbag more durable.Heavy duty handle makes it simple to secure these sandbags to your lighting equipment.It can be used with boom arms, light stands, tripod, etc.Specifications:Sandbags Material: NylonEach Pouch: about 9.6x14 inches/24.5x35.5 centimetersSandbags Color: BlackPackage Contents:4x Sandbags8x PP Bags4x Clips

20 Inches/50 Centimeters Portable Compact Desktop Macro Mini Tripod With 360 Degree Ball Head,1/4 Inches Quick Release Plate, Bag For DSLR Camera, Video Camcorder Up To 11 Pounds/5 Kilograms

Quick-release mounting plate helps ensure fast transitions between shots.The legs are a 5-segment interlocking crutch-type design.The carrying bag is enough for convenience.360 degree dial of swivel ball head with bubble level provide you with a panoramic view.Three positions leg angle adjustment system provides flexible shooting.Specification:Material: Aluminum alloyMaximum Height: 19.7"/50cmMinimum Height: 9.1"/23cmLoad Capacity: 11lbs/5kgScrew: 1/4"Color: BlackPackage Contents:1 x 19.7"/50cm Aluminum alloy Mini Tripod1 x Carrying BagKey FeaturesThe tripod is made of Aluminum alloy, Strong and stable; With the use of a tripod, it can achieve greater performance and maintain image quality for cropping larger picture sizesPortable Compact Desktop Macro Mini Tripod, the minimum height reaches 135mm, so it is the best choice for macro shooting with smaller size, and closer distanceExtends to 19.7"/50cm tall, folds to 9.1"/23cm, 5 sections adjustable-height leg tubesNon-slip feet design to keep the tripod steady. Max load weight is 11lbs/5kg for optimal performance360 degree dial of swivel ball head with bubble level provide you with a panoramic view. Three positions leg angle adjustment system provides flexible shooting

Video Conference Lighting Kit For Zoom Calls/Remote Working/YouTube Video/Live Streaming: 2-Pack Dimmable 5600K LED Video Light With Scissor Arm Stand & 433HZ Remote Control & Color Filters

Note 1: Using laptops or power banks may draw too much power. And the USB port on most tablets does not generate enough power so please DO NOT use it with your Tablets.This light is designed to work with a Wall Plug, so it is recommended to use it with a wall plug which is NOT Included in the package. Please purchase separately.Note 2: Carry bag is not included.Note 3: This Video Light is upgraded with Remote Control Function. Each single light has its corresponding color of the remote; Don't mix them to use or it will fail to work.Description:USB LED Panel LightThe light panel consists of 66 pcs energy-saving LED bulbs for providing superior lighting. It will not flicker even if at low brightness.With convenient USB plug, you can plug it in your desktop PC, mobile power, charging plug.Comes with two 433hz remote, you can switch on/off and adjust the brightness from certain distance(within 15 meters).Comes with color filters for better shooting effect.Can be used as desktop lamp or floor lamp as you like; Suitable for living room, study room, baby room, bathroom or office; Perfect for product portrait photography, YouTube video, TikTok video, Twitch, Live Gaming, Live Streaming, etc.Output Power: 10WLuminous Flux: 1000LMLed Quantity: 66PCSColor Temperature: 5600KDimmer: 10%-100%DC power input: USB 5V/2AScissor Arm Stand:The folding arms allow you to adjust an angle and height as you need.With an adjustable positioning screw, the table clamp can easily clip to any desktop up to 1.7 inches/4.5 centimeter thick.Material: IronEach arm length: 13.78 inches/35cmLoad Capacity: 2.2 pounds/1 kilogramsPackage Contents:2 x USB LED Panel Light2 x White Filter2 x Yellow Filter2 x Blue Filter2 x Red Filter2 x Desktop Scissor Arm Stand2 x 433HZ Remote2 x Mini Ball Head AdapterKey FeaturesADVANCED REMOTE CONTROL: Two 433hz remotes included features 3 buttons(Switch on/off button, Brightness increase/decrease button). The remote is designed with 2 colors(Red and White), they are corresponding to the color of the control panel set on the USB cable of the light. The red remote corresponds to the red control panel of the light while the white remote corresponds to the white control panel of the light. Remote Distance is within 15 metersDIMMABLE LIGHTING: Its brightness can be adjusted from 10% to 100%, and 66 Pieces energy-saving LED bulbs can provide superior lighting you need under different circumstances; Designed with convenient USB plug, you can plug it in your desktop PC, mobile power, charging plug; 5.51x3.714 inches/14x9.5 centimeters Compact panel light can be 180 degrees adjustable, meeting your different demands on suitable shooting angleDESKTOP CLAMP SUSPENSION BOOM SCISSOR STAND: Made of iron frame and iron clip holder. Designed with standard 1/4-inch screw. Each arm length:13.78 inches/35cm; Max load: Approximate 2.2 pounds/1 kilograms; Allows you to adjust a suitable angle and height; Comes with mini ball head for more flexible useOPTIONAL SHOOTING EFFECT: Comes with 4 color filters (white, red, yellow and blue), they can provide softer and colorful lighting; You can change the color of the light through the 4 kind filters to create cool photos and videosPACKAGE CONTENTS: (2)USB LED Light Panel with USB Cable, (2)Scissor Arm Stand, (2)White Filter; (2)Red Filter; (2)Blue Filter; (2)Yellow Filter; (2)Ball Head Adapter; (2)Remote; Note: Using with laptops or power banks may draw too much power. And the USB port on most tablets does not generate enough power so please DO NOT use it with your Tablets. It is recommended to use with a wall plug which is NOT Included in the package. Please purchase separately

Neewer® Pro(Pro Version Of NeewerProduct)Aluminum Camera Video Cage Kit With (1)Video Cage(1)Top Handle Grip(2)15mm Rod For Canon 5D Mark II/ 5D Mark III/700D 650D 600D 550D 500D 450D;Nikon D7000 D5200 D5100 D5000 D3300 D3200 D3100 D3000;Pentax K7 K5 K3 S

Compatible with Nikon/Pentax/Canon 5D Mark II and Other DSLR cameras1/4" mounting holes for attaching other accessoriesIdeal for professional or amateur cameraman/filmmaker15mm rod,top handle grip,wrench includedPortable and lightweight, convenience for you to carry while travellingTop Handle GripThe foam padded handle is adjustable in height along several points on the vertical bracket and can be mounted in either forward or reverseA Perfect accessory for those great low angle shotsTwo 1/4" mounting screws includedMade of rubberVideo CageCompatible with Nikon/Pentax/Canon 5D Mark II and Other DSLR camerasMade of alluminum alloy, durable and built to lastTwo rubber coated handles make it comfortable for you to hold and spread apart for stabilizationEasy to assemble or disassemble,convenience for you to carry while travellingThe top black anodized metal bracket carries (14) 1/4-20 threaded holes and (9) 1/4" holes for mounting a variety of hot shoe adapters, mini ball heads The bottom black anodized metal bracket has (5) 1/4-20 threaded mounts available underneath to attach a quick release platePackage Contents:1x Camera Video Cage2x 15mm Rod Rig1x Top Handle Grip2x Wrench4x 1/4" ScrewKey FeaturesCompatible with Nikon/Pentax/Canon 5D Mark II and Other DSLR cameras1/4" mounting holes for attaching other accessoriesIdeal for professional or amateur cameraman/filmmaker15mm rod,top handle grip,wrench includedPortable and lightweight, convenience for you to carry while travelling

IPad Tablet Tripod Mount Adapter Holder, 6.3-9.25 Inches/16-23.5 Centimeters Adjustable Clamp For IPad Mini IPad 2/3/4, IPad Air/Air2, IPad Pro Surface Samsung Tab 7.0 Series

You can use this Tablet Mount to connect your iPad or other tablet with tripod, selfie stick, or monopod with 1/4-inch screw thread, you can take amazing pictures and cinematic video with your device.The holder can be extended from 6.3 inches/16 centimeters to 9.25 inches/23.5 centimeters.There are two rubber pads inside the ends to protect your tablet from scratches or falling down.SpecificationColor: BlackWeight: 70gMaterial: PlasticWidth: 3 centimetersLength: 6.3-9.25 inches/16-23.5 centimetersPackage Contents:1 x Tablet HolderKey FeaturesTWO 1/4" SCREWS THREAD HOLE: Features two 1/4" screw thread holes under the bottom and the back of the holder to mount your tablet to a Tripod, Monopod, Selfie Stick, or any tripodADJUSTABLE LENGTH: 6.3-9.25 inches/16-23.5 centimeters can be flexible adjusted by screwing in or screwing out the adjustment knobsPTOTECT RUBBER PAD: Features two rubber pads inside the two ends to protect your device from scratches, and also prevent the iPad from falling offCOMPATIBLE: Compatible with iPad Mini, iPad 2/3/4, iPad Air/Air2, iPad Pro, Samsung Tab 7.0 series Supports and other tablets within 6.3-9.25 inches lengthMATERIAL: Made of sturdy but light plastic, 70g weight, more portable for carrying around and storage

NW561 LCD Display Flash Speedlite For Canon Nikon Panasonic Olympus Pentax Fijifilm And Sony With Mi Hot Shoe, DSLR And Mirrorless Cameras With Standard Hot Shoe

Note: Camera NOT included. Features: Powerful Flash with High Guide No.38 (ISO 100, 35mm),supports M/MULTI/S1/S2 flash mode. Super speed charging recycle: approx 2.9 s. Lighting times:100-1500 times; Flash time:1/200s-1/20000s;Flash control:8 levels of output control(1/128-1/1). Fixed Zoom, and Vertical Rotation Angle: -7-90 degrees, Horizontal Rotation Angle: 0-180 degrees. Additional function: PC synchronous, power saving mode, over temperature protection. Specifications: Circuit design: Insulated Gate Bipolar Transistor (IGBT) Guide No.: 38(ISO 100, 35mm) Flash mode: M/MULTI/S1/S2 Flash coverage: Fixed Zoom Swinging/Tilting flash head (bounce flash) The wireless trigger: S1/S2 induction flash Wireless Trigger Distance: Indoor 20-30 meters; Outdoor 10-15 meters Vertical: -7 to 90 degrees; Horizontal: 0-180 degrees Color Temperature: 5500K Flash Time: 1/200 - 1/20000 seconds Recycle time: 2.9 seconds Lighting time: 100-1500 times Flash Control: 1/128 - 1/1 step length is 0.3EV, total 22 fine-tuning stalls. External interface: hot shoe, PC sync port, external charging port Power: 4 x AA size batteries (Alkaline or rechargeable Ni-MH are recommended.(Batteries are not included.) Additional function: PC synchronous, power saving mode, over temperature protection. Package Contents: 1 x NW-561 Flash 1 x Mini StandKey FeaturesPowerful Flash with High Guide No.38(ISO 100, 35mm),supports M/MULTI/S1/S2 flash mode Note：Don't support TTL and the camera menu setting Function Super speed charging recycle:0.1-5s, Note：Compatible with for Canon Nikon Panasonic Olympus Pentax Fijifilm and Sony with Mi Hot Shoe cameras, like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500 (NOT compatible with Canon 250D/1500D/2000D/4000D) Lighting times:100-1500 times;Flash time:1/200s-1/20000s;Flash control:8 levels of output control(1/128-1/1) Fixed Zoom,and Vertical Rotation Angle: -7-90 degrees, Horizontal Rotation Angle: 0-180 degrees Additional function: PC synchronous, power saving mode, over temperature protection

Professional Metal 360 Degree Rotating Panoramic Ball Head With 1/4 Inch Quick Release Plate And Bubble Level,up To 17.6pounds/8kilograms,for Tripod,Monopod,Slider,DSLR Camera,Camcorder

Quick release plate with 1/4" screw. Easy to set up in seconds.Both horizontal and vertical bubble level to enhance perception of position.Smooth ball joint for versatile angle moving.3/8" screw mount at the bottom enable connection of most type of tripod or light stand360 Degrees Swivel, equipped with 3 knobs for adjustment, you are able to set your camera at different angle.Specifications:Material: MetalQuick Release Plate: 1/4"Bottom Screw Thread: 3/8"Load Capacity: 17.6lbs/8kgPackage Content:1 x Tripod Ball HeadKey Features360 Degree Swivel: Equipped with 3 knobs for adjustment, you are able to set your camera at different angleComes with 3/8'' Bottom Screw Thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing1/4" quick shoe plate; Easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of positionWith Fine Tuning Damping to protect your device from sudden plunge while doing versatile angle shootingThe base with index marking to indicate more precise control

12x12 Inches Transparent Color Correction Lighting Filter Set Of 8 Sheet For Photo Studio Strobe Flash Light LED Lights (Red, Yellow, Orange, Green, Purple, Pink, Light Blue, Dark Blue)

Colored lighting filters are often used as accent lights or to add dramatic color to backgrounds or selected portions of a scene for artistic effect.You can also use combinations of these filters for a more variation to the color of light.Can be fastened by magic strap, easy to use.You can use combinations of these filters to create different effects, such as cool effects, enhancing skin tone in portraits, color correcting or matching ambient, simulating different kinds of light, cheating white balance etc.The filters are made of high light transmission materials with light weight, steady color temperature and low loss.Perfect for Photo Studio Strobe Flash Light LED LightsSpecification:Dimension: 12 x 12"/30 x 30cmColor: Red, Yellow, Orange, Green, Purple, Pink, Light Blue, Dark BlueShape: SquarePackage Contents:1 x Color Filter Kit (8 pieces)Key FeaturesContains 8 sheets in 8 different colors, including red, yellow, orange, green, purple, pink, light blue, dark blue; Please don't attach the filters to modeling lamp or it will be meltedMade of high light transmission materials with light weight, steady color temperature and low lossColor filters are used for lighting effects and color correction, involving additive and subtractive color, color mixing, color transmission, absorption and filtering of the different wavelengths of lightUse combinations of these filters to create different effects; Perfect for Photo Studio Strobe Flash Light LED LightsColored gels for lights used in film, video, photo, stage, theater, party, and DJ lighting.

10-Pack 6.5 Foot / 2 Meters DMX Stage Light Cables Wires With 3-Pin Signal XLR Male To Female Connection For Moving Head Light Par Light Spotlight With XLR Input & Output

Neewer 10-Pack 6.5 feet/2 meters DMX Stage Light Cable Wires with 3-Pin Signal XLR Male to Female ConnectionIt is designed for accurate transmission of digital audio and DMX lighting control data.Reliable Cable: Safety, shielding, and prevent transmission interference.Compatibility: Suitable for stage light, such as moving head light, par light, spotlight, etc.Convenient and Cost-effective: 10 packs 2 meters DMX Cables connect to stage light, making a visual feast in parties, weddings or any type of festive occasion.Note: Cables Only; stage Devices in the pictures not includedSpecifications:Quantity: 10-PackMaterial: PVC + CopperConnectors: Male and FemaleCable Color: BlackLength: 6.5 feet/2 metersPackage Includes:10 x DMX CablesKey Features10-Pack 6.5Feet / 2 Meters DMX Stage Light Cables3-Pin Signal XLR Male to Female ConnectionSafety, shielding, and prevent transmission interferencesSuitable for various products of stage light: moving head light, par light, spotlight with XLR input & outputNOTE: Cables ONLY! Stage Devices in the pictures NOT INCLUDED

NW-800 Microphone Set Including (1) NW-800 Professional Condenser Microphone + (1) Microphone Shock Mount + (1) Ball-type Anti-wind Foam Cap + (1) Microphone Power Cable (Blue)

NOTE:1.The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it. When connected with desktop computer, the Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough.2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included).3.The microphone can not be used with mobile phone and tablet computer. NOTE: It cannot work with Mac.4.If you want better sound effect, a sound card should be used.5.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier.(1)Blue Professional Condenser Microphone:Bass-reduction switch(-10dB) reduces room noise and deals with non-linearity audio input.Use precision electronic circuit to eliminate the crossover distortion and harmonic distortion.Good cardioid pickup output and high sensitivity. Low noise. Wide dynamic range.Fashionable design. Noble and elegant appearance.Sturdy and durable.Body weight: 11oz/316gColor: BlueMaterial: Metal(1)Ball-Type Anti-wind Foam Cap:Reduce the occurrence of wind, breath sounds and popping noises.Keep your microphone clean and help extend it's lifetime.(1)Microphone Shock Mount:Isolate most studio condenser mics from physical vibration, floor, and stand noise.Color: Sliver.(1)Power Cable:Length: Approx. 2.5m/8.2feetKey FeaturesThe Set Includes: (1)Blue Professional Condenser Microphone + (1)Sliver Microphone Shock Mount + (1)Ball-type Anti-wind Foam Cap + (1)Microphone Power Cable.The professional condenser microphone adopts the exacting complete electronic circuit control. Capture rich, full-bodied sound from sources that are directly in front of the mic.The shock mount can effectively reduce handling noise.The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.What's In the Box

Camera Shoulder Rig, Video Film Making System Kit For DSLR Camera And Camcorder With Shoulder Mount, 15mm Rod, Handgrip And Matte Box, Compatible With Canon/Nikon/Sony, Etc (Red + Black)

NoteCamera and tripod are not included.Camera Shoulder RigUp your photo game with better control and enhanced stability. This camera shoulder rig is perfect for video recording or filmmaking.Adjustable Matte BoxThe matte box with foldable top and side flags blocks out excessive unwanted light and prevents lens flare. The height is adjustable for cameras of various sizes.Rod Rail SystemMount the rig to a tripod with a 1/4” or 3/8” screw. The 15mm rods made of aluminum alloy ensure durability. Each component can be moved on the 60mm-gauge rod rails for optimal positions. The hand grips provide a comfortable and secure grip for handheld shooting. The mounting plate with rubber padding and a 1/4” screw mounts your camera securely.Shoulder PadThe curved shoulder pad reduces shoulder pressure and enhances stability when you're shooting videos.SpecificationsMaterials: Aluminum alloy, ABSRod Rail Gauge: 60mmRod Diameter: 15mmMounting Plate Screw Thread: 1/4”Package Contents1 × 15mm Rod Rail System with Dual Hand Grips1 × Shoulder Pad1 × Matte BoxKey Features【Camera Shoulder Rig】 Designed to provide a comfortable shoulder-mounted shooting experience, this shoulder rig adds stability while you're shooting for an extended period of time so you can create crystal-clear videos. Compatible with DSLR, mirrorless cameras, and camcorders【Matte Box with Top & Side Flags】 The matte box with top and side flags blocks unwanted light and prevents lens flare. The foldable top and side flags also protect your lens, giving you more peace of mind【15mm Rod Rail System & Mounting Screws】 Easily mount your camera to the rig using the top 1/4” screw. The 15mm rods support the matte box and your camera, while the 60mm-gauge rod rails allow adjustments of their positions. There is also a 1/4” and a 3/8” female thread, making it easy to mount the rig on most tripods.【Comfortable Handles & Shoulder Pad】 Dual hand grips are convenient for handheld shooting. The curved shoulder pad reduces the pressure on your shoulder and enhances stability【Package Contents】 Neewer Shoulder Pad, 15mm Rod Rail System with Dual Hand Grips, Matte Box

Pro Microphone Isolation Shield, 3-Panel Pop Filter, High Density Absorbent Foam Front & Vented Metal Back Plate, Compatible With Blue Yeti And Any Condenser Microphone Recording Equipment

Neewer Pro Microphone Isolation Shield, 3-Panel Pop Filter, High Density Absorbent Foam Front & Vented Metal Back PlateNOTE: The package only contains a mic isolation shield and adapters. It does not include any stand, headphones, shock mount and microphone.This acoustic shield features an acoustic foam front and a vented metal back plate, which allows the microphone to "breathe" and prevents reflections within the arc of the shield. Two outer panels can be folded inward for storage or for creating a tighter acoustic isolation chamber to help you achieve a more crisp and clean sound when recording.Unwanted outside audio waves and vibrations, also known as noise and interference are shielded away from the recording area while your voice finds a clear path to your microphone.It can be fixed on counter top or tabletop, and also can be mounted to a microphone stand.Suitable for professional recording studio music recording, film recording and other production; music studios, bands, personal live broadcast, recording, singing, etc.Specifications:Dimensions (Fully Extended): 14x11x2inches/36x28x5 centimetersDimensions (Folded): 12x12x7.5inches/31x31x19centimetersDimensions (Single panel): 11x4.5inches/28x11.5centimetersMic Isolation Shield Weight: 2 lbs/0.93 kilogramsSound Absorbing Foam Thickness: 1.57inches/4centimetersMaterial: Foam, MetalPackage Contents:1x Tri-Fold Mic Isolation Shield,1x Connecting Rod with Thread,2x Nut,1x 3/8" Male to 5/8" Female Threaded Screw Adapter (Black),1x 3/8" Female to 5/8" Male Threaded Screw Adapter (Gold)

Universal Photography Speedlite Flash 1.85" X 3.03"/47 X 77 Mm 35PCS Square Full Color Balance Filter Kit With Magic Strap For Canon Nikon Sony Pentax Olympus And Other Flashes

Features:35 pieces color filters for lighting effects and color correction. Cut to fit most Flash model.Includes the largest selection of popular colors for controlling light from your strobes.Provides 35 different color temperature, creating the effect of different light colors.35 color filters made of high transparent material,the color temperature is stable and the loss is small, lightweight and rugged, a wide range of uses.Use combinations of these filters to create different effects, such as cool effects, enhancing skin tone in portraits, color correcting or matching ambient, simulating different kinds of light, cheating white balance etc.Can be fastened by magic strap, easy to use.Specifications:Filters Size: 1.85 x 3.03 in / 47 x 77 mmWrap Strap Size: 9.33 x 1.18 in / 237 x 30 mmPackage Contents:1 x 35pcs Color Filter Kit with Magic StrapKey Features35 pieces color filters for lighting effects and color correction.Includes the largest selection of popular colors for controlling light from your strobes.35 color filters made of high transparent material,the color temperature is stable and the loss is small.Use combinations of these filters to create different effects, such as cool effects, enhancing skin tone in portraits, color correcting or matching ambient, simulating different kinds of light, cheating white balance etc.Can be fastened by magic strap, easy to use

Neewer® Black Metal PU-50 Universal Quick Release Plate Fits Arca-Swiss Standard For Tripod Ballhead (PU50 III)

Superior quality aluminum alloy is used to ensure a light weight but super high strength support.Advanced CNC (Computerized Numeric Control) machine systems provide precise dimension to fit perfectly.Aluminum Anodized surface treatment assures years of corrosion and abrasion-resistant operaton.Anti-twist locking screws match the international standardsSpecial anti-slip rubber pads enhance the grip between each plate and the mounted gear, and protect the gear from any damage due to mounting.Specifications:Material: Metal AlloyColor: Matt BlackLength: 50mmWidth: 38mm (universal width of Arca-Swiss Standard QR plates)Thickness: 10mm (universal thickness of Arca-Swiss Standard QR platesMounting Screw Diameter: 1/4" (the screw size that connecting the QR plate and camera)Compatibility: Arca-Swiss StandardPackage Contents:1x Quick Release PlateKey FeaturesSuperior quality aluminum alloy is used to ensure a light weight but super high strength support.Advanced CNC (Computerized Numeric Control) machine systems provide precise dimension to fit perfectly.Aluminum Anodized surface treatment assures years of corrosion and abrasion-resistant operaton.Special anti-slip rubber pads enhance the grip between each plate and the mounted gear, and protect the gear from any damage due to mounting.

Neewer® 4"x5"/10cmx13cm Universal Foldable Flash Light Diffuser Softbox For Canon Nikon Sony Sigma Olympus Minolta Sunpak DSLR Cameras, Such As Canon 580EX 550EX 540EZ 430EX 420EX 380EX 430EZ Nikon SB-800 SB-600 SB-80DX SB28 SB26 SB25 SB24

Description:A dramatic, eye catching photo can mean dramatic profits. Getting a well exposed photo is extremely important.Photographers often turn to a flash to help light the scene.The problem is that flash can cause harsh reflections or glare spots or create deep shadows that distract viewers.This little, portable universal external flash diffuser will prevent those problems when using a flash.Simply put the unit over the camera's flash, point and shoot.The light will be softened and your photos will be well exposed, without the harsh glare spots.Compatibility:Nikon SB-800 SB-600 SB-80DX SB28 SB26 SB25 SB24Canon 580EX 550EX 540EZ 430EX 420EX 380EX 430EZMetz 40MZ2 54MZ3MINOLTA 5600hs 5400xi/hx 5200i 3600OLYMPUS FL-40 FL-50 G40SONY HVL-F1000 HVL-F32XSigma EF-500DG Super, STNissin 360TW 360TXP PZ400-C-N-MSunpak 2000DZ 266D MZ440AFTumax 988Vivitar 2500 273 3500 850AFDimensions: 10cm x 13cmPackage Contents:1x Flash Light DiffuserKey FeaturesProvides soft even flash illuminationOne size fits all.Folds down flat for easy storage and portabilityFit for Nikon SB-800 SB-600 SB-80DX SB28 SB26 SB25 SB24Fit for Canon 580EX 550EX 540EZ 430EX 420EX 380EX 430EZ

Neewer® 58MM Complete Lens Filter Accessory Kit

(1)58mm Filter Kit (UV, CPL, FLD):UV filters reduce haze and improve contrast by minimizing the amount of ultraviolet light.CPL filters are great for removing unwanted reflections from non-metallic surfaces such as glass or water.FLD filters allow for shooting under fluorescent lighting. Bring warm natural lighting to rooms.(1)58mm Macro Close-up Filter Set (+1, +2, +4, +10):Increase magnification for high detail, close-up macro photography.Perfect, economical alternative to a macro lens. Offer a world of new and creative possibilities.(1)ND Filter Set (ND2, ND4, ND8):Enable slower shutter speeds.Better separate subjects from the background by allowing wider apertures.(1)3-in-1 Collapsible Lens Hood:Midway for wide angle shots, or completely for macro photography and storage.(1)Tulip Lens Hood:Help prevent glares: Those circles of light that can accompany images where a strong light source is just outside the frame.Professional tulip shape(also known as 'flower' or 'petal' shape) design allows for greater versatility.(1)Snap-on Lens Cap + (1)Cap Keeper Leash:Easy to use. Quickly attach to the front of your camera lens.Made of high impact plastic for extra durability.(3)Filter Carrying Pouches + (1)Microfiber Cleaning Cloth:The pouch is designed to hold and protect filters with or without their protective cases.The cleaning cloth features special saw tooth pattern edges; Leave zero scratches, streaks or marks. Size: 5.9x5.7"/ 15x14.5cm.Package Contents:1 x Filter Kit (UV, CPL, FLD)1 x Macro Close-up Filter Set (+1, +2, +4, +10)1 x Neutral Density Filter Set (ND2, ND4, ND8)1 x 3-in-1 Collapsible Lens Hood1 x Tulip Lens Hood1 x Snap-on Front Lens Cap1 x Cap Keeper Leash3 x Filter Carrying Pouches1 x Microfiber Cleaning Cloth(1)58mm Filter Kit (UV, CPL, FLD):UV filters reduce haze and improve contrast by minimizing the amount of ultraviolet light.CPL filters are great for removing unwanted reflections from non-metallic surfaces such as glass or water.FLD filters allow for shooting under fluorescent lighting. Bring warm natural lighting to rooms.(1)58mm Macro Close-up Filter Set (+1, +2, +4, +10):Increase magnification for high detail, close-up macro photography.Perfect, economical alternative to a macro lens. Offer a world of new and creative possibilities.(1)ND Filter Set (ND2, ND4, ND8):Enable slower shutter speeds.Better separate subjects from the background by allowing wider apertures.(1)3-in-1 Collapsible Lens Hood:Midway for wide angle shots, or completely for macro photography and storage.(1)Tulip Lens Hood:Help prevent glares: Those circles of light that can accompany images where a strong light source is just outside the frame.Professional tulip shape(also known as 'flower' or 'petal' shape) design allows for greater versatility.(1)Snap-on Lens Cap + (1)Cap Keeper Leash:Easy to use. Quickly attach to the front of your camera lens.Made of high impact plastic for extra durability.(3)Filter Carrying Pouches + (1)Microfiber Cleaning Cloth:The pouch is designed to hold and protect filters with or without their protective cases.The cleaning cloth features special saw tooth pattern edges; Leave zero scratches, streaks or marks. Size: 5.9x5.7"/ 15x14.5cm.Package Contents:1 x Filter Kit (UV, CPL, FLD)1 x Macro Close-up Filter Set (+1, +2, +4, +10)1 x Neutral Density Filter Set (ND2, ND4, ND8)1 x 3-in-1 Collapsible Lens Hood1 x Tulip Lens Hood1 x Snap-on Front Lens Cap1 x Cap Keeper Leash3 x Filter Carrying Pouches1 x Microfiber Cleaning ClothKey FeaturesKit includes:(1)Filter Kit (UV, CPL, FLD) + (1)Macro Close-up Filter Set (+1, +2, +4, +10) + (1)Neutral Density Filter Set (ND2, ND4, ND8) + (1)3-in-1 Collapsible Lens Hood + (1)Tulip Lens Hood + (1)Snap-on Front Lens Cap + (1)Cap Keeper Leash + (3)Filter Carrying Pouches + (1)Microfiber Cleaning Cloth.Compatible with the CANON Rebel (T5i T4i T3i T3 T2i T1i XT XTi XSi SL1), CANON EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens witch include: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM.The 58mm filter kit(UV, CPL, FLD)fit any camera lens with a 58mm filter thread. High quality metal and glass construction. The 58mm macro close-up filter set(+1, +2, +4, +10)are double threaded allowing additional filters, lenses, or attachments to be mounted on top. The ND filters(ND2, ND4, ND8) reduce the amount of light reaching the film without affecting the color.The 3-in-1 collapsible lens hood extends to full length for use with a telephoto lens. The tulip lens hood can help prevent flares. [ 1The filter carrying pouch has clear inner lining for quick and easy access. The cleaning cloth is safe for all surfaces and lenses. [ 2

Video Camera Digital Recorder Adapter With Mini Ball Head-360 Degree Pan And 180 Degree Tilt Movement For Connecting 1/4-inch Thread Camera, Camcorder, Recorder With 5/8-inch Mic Stand Or Boom

Description:The adapter can be used for conference, presentation recording, school play, concert live performances recording, and great for musicians who seek to upload videos of their band on YouTube.The adapter's ball-head allows for independent pan and tilt with 360 degree pan movement and 180 degree tilt.When you twist the locking knob control,it can go to the exact position according to your needs by 360 degree rotation.The tightening wheel has threads cut in opposing directions, so once you tighten the control, the ballhead will be locked without shaking and it won't move around.Attach this innovative adapter to any 5/8 inch threaded mic stand or boom to support a video camera or digital recorder with standard 1/4 inch threaded female inserts.Specification:Item Weight: 4.6 ounces/130 gramsThread: 5/8-inchMaterial: Nickel Plated, Rubber PaddingPackage Contents:1 x Video Camera/Digital Recorder AdapterKey FeaturesCOMPATIBILITY: Attach this innovative adapter to any 5/8-inch threaded mic stand or boom pole to support a camera, camcorder, video camera or digital recorder (such as Marantz PMD620, Zoom H2, H4 and the Edirol R09 and more) with standard 1/4-inch threaded female insertsFLEXIBLE POSITIONING: Designed with a ball-head allowing for independent 360 degree pan movement and 180 degree tilt movement; and it's convenient to twist the locking knob control and go to the exact position according to your needsWIDELY USE: It can be used for conference, presentation recording, school play, concert live performances recording, great for musicians who seek to upload videos of their band on YouTubeMATERIAL: Made of Nickel plated and rubber padding can provide protection for cameras

Universal Piano-style Sustain Foot Pedal With Polarity Switch Design Compatible With Any Electronic Keyboard With 1/4 Input Jack

Neewer Universal Piano-style Sustain Foot Pedal with Polarity Switch Design Compatible with Any Electronic Keyboard with 1/4 Input JackNeewer Piano-style pedal with a 5ft cable and 1/4 inch Plug. Designed to work and feel just like an acoustic piano's sustain pedalCompatible with any electronic keyboard with 1/4 input jackAnti-slip design. this pedal features 4 rubber on the bottom that prevents it from slipping when used in piano/keyboard performancesThis high-quality pedal features a polarity switch making it compatible with virtually any keyboardChrome plated metal pedal, high strenth plastic shell, sturdy and durabalFeaturesPiano-style pedal with a 5ft cable and 1/4 inch Plug. Designed to work and feel just like an acoustic piano's sustain pedalCompatible with any electronic keyboard with 1/4 input jackAnti-slip design. this pedal features 4 rubber on the bottom that prevents it from slipping when used in piano/keyboard performancesThis high-quality pedal features a polarity switch making it compatible with virtually any keyboardChrome plated metal pedal, high strenth plastic shell, sturdy and durabalSpecifications:Color: BlackCord Length: 5ft/152cmConnector: 1/4Package Contents1 * Sustain Foot PedalKey FeaturesNeewer Piano-style pedal with a 5ft cable and 1/4 inch Plug. Designed to work and feel just like an acoustic piano's sustain pedalCompatible with any electronic keyboard with 1/4 input jackAnti-slip design. this pedal features 4 rubber on the bottom that prevents it from slipping when used in piano/keyboard performancesThis high-quality pedal features a polarity switch making it compatible with virtually any keyboardChrome plated metal pedal, high strenth plastic shell, sturdy and durabal

Metal Adjustable Camera Large Super Clamp And Ball Head Hot Shoe Mount Adapter With 1/4 Inch Screw For DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider And Light Stand

NOTE: ONLY Super Clamp and Ball Head are included.Description:It is ade of metal, durable and solid; Metal construction with black anodized for higher durabilityperfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider and Light StandThe super clamp can max open 2.28 inch/ 5.8cm, and min 0.4 inch/ 1cm rodswith 1/4 inch Screw Mount, uses to mount accessories onto a flash bracketIt is easy to operateand assemble in minutes, can be mounted virtually anywhereSuper clamp lock the rod size: 0.4x 2.28 inch/ 1x 5.8 centimeterBall Head Height: 1.97 inch/ 5 centimeterWeight: 6.7 ounces/ 190 gramMaterial: MetalPackage Contents:1 x Super Clamp and Ball Head Mount Hot Shoe AdapterKey FeaturesSOLID CONSTRUCTION: Made of metal, durable and solid; Metal construction with black anodized for higher durability, assures years of corrosion and abrasion-resistant operatonDESIGNE: Comes with a clamp at the bottom and Ball Head Mount Hot Shoe Adapter with 1/4 inch screw on the top, It could attach and detach from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting; perfect for DSLR Film Movie Rig, Monitor, Flash, LED Lights, Track Slider and Light StandLARGE SUPER CLAMP: The super clamp can max open 2.28 inch/5.8 centimeter, and min 0.4 inch/1 centimeter rods; It is a very versatile and useful tool especially for holding the monitor and DSLR camera

NW-800 Professional Studio Broadcasting & Recording Condenser Microphone With Shock Mount

(1)Black Professional Condenser Microphone: Use precision electronic circuit to eliminate the crossover distortion and harmonic distortion. Good cardioid pickup output and high sensitivity. Low noise. Wide dynamic range. Suitable especially for studios, recording studios, broadcasting stations, stage performances and computer in sound reinforcement or recording, to pick up voice or instruments, indoors or outdoors. Specification: Microphone-core: Dia.16mm Polar Pattern: Cardioid Frequency Response: 20Hz-16kHz Sensitivity: -38dB±2dB(0dB=1V/Pa at 1kHz) Output Impedance:150 & Omega;±30%(at 1kHz) Load Impedance:≥1000 & Omega; . Equivalent Noise Level: 16dBA Max.SPL:132dB S/N Ratio:78dB Electrical Current: 3mA Voltage:1.5V Battery Body weight: 11oz/316g Color: Black Material: Metal Note: Don't drop, hit or apply strong shock to it. To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperatures.It can not work with Mac. (1)Ball-Type Anti-wind Foam Cap: Designed for most standard microphones. Reduce the occurrence of wind, breath sounds and popping noises. Keep your microphone clean and help extend it's lifetime. (1)Microphone Shock Mount: This is a very nice shock mount for most large diaphragm condenser microphone. Isolate most studio condenser mics from physical vibration, floor, and stand noise. (1)Power Cable: Length: Approx. 2.5m/8.2feetKey FeaturesThe Set Includes: (1)Black Professional Condenser Microphone + (1)Microphone Shock Mount + (1)Ball-type Anti-wind Foam Cap + (1)Microphone Power Cable. The professional condenser microphone adopts the exacting complete electronic circuit control. Capture rich, full-bodied sound from sources that are directly in front of the mic. The shock mount can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers' spit.

Adjustable Recording Microphone Suspension Boom Scissor Arm Stand With Mic Round Shape Wind Pop Filter Shield, Shock Mount And Phone Holder, Black

(1) Microphone Suspension Boom Arm Stand:Made of all steel construction, sturdy and durable.The adjustable arms allow you to carry it with you easily and adjust the suitable angle and height to show your perfect voice.Folding type, convenient to carry.(1)Table Mounting Clamp:Designed to securely mount your microphone stand to table top or other flat surface using an adjustable positioning screw.Maximum Table Thickness: 2.4"/6cm(1)Pop Filter Shield:Diameter:4"/10cm(1)Shock Mount:Full 360-degree rotation for the perfect angle.Microphone shock mount for less than 1.2"/36mm Diameter Condenser Mic(1)Phone Holder with Gooseneck:Fit for phone width within 5.5"/14cmPackage Contents:1 x Microphone Suspension Boom Arm Stand1 x Table Mounting Clamp1 x Pop Filter Shield1 x Shock Mount1 x Phone Holder and Gooseneck shieldKey FeaturesThe adjustable arms allow you to adjust the suitable angle and height to show your perfect voice. Folding design, convenient to carry and space savingSteel base 2.4"/6cm table mounting clamp, can be mounted on the announcers' table securely, suitable for any stores, families, stages, studios, broadcasting and TV stations, etcThe adjustable scissor arm stand is made of high quality steel frame, sturdy and durableMicrophone shock mount for less than 1.2"/36mm Diameter Condenser Mic. The phone holder with flexible gooseneck can be easily adjusted to your needs, can hold the phone under 5.5"/14cm

Neewer® 8 Pieces Step-up Adapter Ring Set Made Of Premium Anodized Aluminum, Includes: 49-52mm, 52-55mm, 55-58mm, 58-62mm, 62-67mm, 67-72mm, 72-77mm, 77-82mm-Black

Description:Neewer Step-up Filter Adapter Ring Set can easily screw onto the front of any lens, and convert the thread size of your lens to the thread size of any other accessory (such as filters, hoods, flashes and lens converters).Specifications:Material: Anodized AluminumColor: BlackPackage Contents:1*49-52mm step-up ring1*52-55mm step-up ring1*55-58mm step-up ring1*58-62mm step-up ring1*62-67mm step-up ring1*67-72mm step-up ring1*72-77mm step-up ring1*77-82mm step-up ringKey FeaturesThe Step-up Ring Set includes: (1)49-52mm step-up ring + (1)52-55mm step-up ring + (1)55-58mm step-up ring + (1) 58-62mm step-up ring + (1)62-67mm step-up ring + (1)67-72mm step-up ring + (1)72-77mm step-up ring + (1)77-82mm step-up ring.Provide a way to fit larger diameter filters or accessories onto a smaller lens.Made of premium grade aluminum, and precision production ensures smooth mounting.Extremely solid and lightweight, polished and finished with anodized matte surface.Fit any lens with the same filter thread, manual or autofocus, digital or film.

16 Channels Wireless Radio Flash Speedlite Studio Trigger Set With Standard Hot Shoe, Including Transmitter And Receiver, Fit For Canon Nikon Pentax Olympus Panasonic DSLR Cameras (CT-16)

It is compatible with Canon Nikon Pentax Olympus DSLR Cameras.It has 16 channels and the transmit frequency of 433MHz can secure fast response and stable transmission.The transmitter is supposed to be mounted on the camera and can trigger most sorts of camera flashes in a distance of 30 meters when work with the receiver.Energy-saving design with 12V 23A battery for transmitter and two AAA batteries (not included) for receiver.SpecificationsChannel: 16Transmit Frequency: 433MHz wireless remote systemTransmitter Power: 12V 23A lithium batteryReceiver Power: 2 x 1.5V AAA Battery (Not included)Synchronous speed: Max. 1/250secOutdoor Operation Distance: Up to 30 metersIndoor Operation Distance: Up to 20 metersDimension of Transmitter: 6 x 4.2 x 3 centimetersDimension of Receiver: 9 x 5 x 3.2 centimetersPackage Contents1 x CT-16 Wireless Transmitter and Receiver1 x Sync Cable1 x Convert Adapter1 x Instruction manualKey Features433MHz transmit frequency secures fast response and stable transmission16 channels, transmitting distance up to 30m, no limits with directions or anglesWork with the receiver, the transmitter can trigger most sorts of camera studio flashesMaximum synchronous speed up to 1/250 second

Neewer® Aluminum Alloy Lens Mount Adapter For M42 Lens To Canon EOS Camera, Such As 1d/1ds, Mark II, III, 5D, Rebel Xt, Xti, T2i, And More - Black

Description:This lens adapter allows M42 lens to fit on Canon EOS camera body. The aluminum alloy material makes it light weight and durable. It will not add too much weight to your camera, which is convenient for shooting as your wish. The smooth surface of it guarantees smooth mounting and offers you comfortable experience. It is high quality with ideal price and helps you to save the cost of purchase on new lenses.Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000DAlthough the lens will fit physically, automatic diaphragm, auto-focusing, or any other functions will not operate correctly while using this adapter. In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body. You can shoot with manual mode or aperture priority mode. Infinity focusing is allowed.Specifications:Weight: 0.85ozMaterial: Aluminum AlloyColor: BlackPackage Contents:1* Lens AdapterKey FeaturesAllows M42 Lens to fit on Canon EOS Camera body.Manual focus and manual exposure. It also can be used with Macro rings and other accessoriesSmooth surface for effortless mount. Durable anodized aluminum construction.Compatible Cameras (including, but not limited to): 1d/1ds, Mark II, III, IV, X, C, 5D, 5D Mark II/III 7D, 10D, 20D, 30D, 40D, 50D, 60D, 60Da, Rebel xt, xti, xs, xsi, t1i, T2i, T3, T3i, T4, 300D, 350D, 400D, 450D, 500D, 550D, 1000D

16 Channel Wireless Flash Trigger Set 1 Transmitter + 3 Receivers + 1 Sync Wire Cable For Canon 580EX II 580EX 550EX 540EZ 520EZ 430EX 430EZ 420EX 420EZ 380EX, Nikon SB-800 SB-600 SB-28 SB-27 SB-26 SB-25 SB-24, Olympus FL-50 FL36, Pentax AF-540 FGZ

Style:1 Transmitter + 3 ReceiversThis flash trigger device is control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless remote signal controlling.The transmitter consists of advanced designed circuit and component, and works through sending encoded signal. It comes with 2.5mm sync port. This flash trigger can work with all camera with standard hot shoe mount and those cameras with 2.5mm port.(but does not work with Sony flashes)It is very useful when you want to trigger 3 flashes at one time.Specifications:Operate frequency: 433MHZSync speed: 1/250sWork range: ¡U30MScrew mount on receiver: 1/4"Battery for tramsmitter: 23A-12V mini batter (the battery included)Batery for receiver: 2x1.5V AAA battery (the batteries not included) Suitable for:Canon SpeedLite 580EX II, 580EX, 550EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;Nikon SpeedLight SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;Olympus FL-50, FL36;Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;Sigma EF-500 DG Super, EF-500 DG ST, EF-430;Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);Other flash models with a trigger voltage of 12V or lower;Work with flash units using universal hot shoe like Nikon, Sigma, Olympus, Pentax (except Minolta SONY as they use a special hot shoe).Note: Before the transmitter can trigger the receivers, the channels on these devices must be set in the same pattern. Please read the user manual for more details.Package Contents:1x Transmitter (with built-in battery)3x Receiver (AAA Batteries not included)1x PC Sync cord for camera (2.5mm to Male)Key FeaturesOperate frequency: 433MHZSync speed: 1/250sScrew mount on receiver: 1/4"This flash trigger device is control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless remote signal controlling.Very low voltage working. So it can ensure high level of safety and no damage to the camera.

S-Type Bracket Holder With Bowens Mount For Speedlite Flash Snoot Softbox Beauty Dish Reflector

COMBINATION of L-type and T-type speedlite mounts AND IMPROVED from them;No pre-assembly & post-disassembly. Smaller size, less space occupied;Unique speedlite mounting method: the speedlite can be clamped firmly into the mount BOTH HORIZONTALLY AND VERTICALLY;Reliable mounting: firm clamp between 2 pieces of soft plastic, NO PRESSURE NOR METAL SCRATCH to your speedlite;Adjustable mount size, suitable for ALL BRANDS OF SPEEDLITES some devices with similar design as speedlites;Bowens mount design facilitates most studio flash accessories, e.g. softboxes, reflectors, beauty dishes, etc; input hole included as further support to your studio practices and lighting direction is adjustable via handle support.Specifications:Size(L x W x H, approx. cm): 15 x 5.5 x 22Weight(approx. g): 410Installation: Quick and Direct use (No pre-assembly & post-disassembly)Material: Durable plasticDevices support(NOT included):Speedlites (Nikon SB910 SB900, Canon 600EX 580EX/II 550EX/II, etc)Softbox (Bowens mount supported)Beauty dish (Bowens mount supported)Reflector and SO ON!Package Contents:1x NEEWER S-type Flash Speedlite Bracket MountKey FeaturesGreat combination of L-type and T-type speedlite mounts and improved from themNo pre-assembly & post-disassembly. Smaller size, less space occupiedUnique speedlite mounting method: the speedlite can be clamped firmly into the mount both horizontally and verticallyReliable mounting: firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedliteBowens mount design facilitates most studio flash accessories, e.g. softboxes, reflectors, beauty dishes, etc