1. Pressed powder board: Can not be used alone, optional accessories, if the powder density is small, very light. It is recommended to use a pressed powder board. The function is to compact the powder inside the capsule, then flatten it with a spatula, fill the powder again, and then flatten it.
2. Product data
Size: Length 26.2cm, Width 19cm (The measurement size has errors, just for reference)
Capsule board composition:
1. Guide plate: there is a frame around it, there is a notch (for easy pouring of the extra capsule), there are 2 positioning screws on the diagonal
2. Cap plate: double-layer plexiglass with relatively small spacing between the plates (capsule caps are installed)
3. Intermediate board: single-layer plexiglass, with gaps on both sides (for marking, non-defective)
4. Body board: double-layer plexiglass, with a relatively large board surface spacing, with springs and copper feet (with capsule body)
5. Powder scraper: a single white plastic sheet (the powder is scraped into the capsule on the body plate, not the powder in the guide plate)
6. Pressed powder board (cannot be used alone, optional accessories): If the powder density is small, it is very light. It is recommended to use a pressed powder board. The function is to compact the powder inside the capsule, then flatten it with a spatula, fill the powder again, and then flatten it.